Nucleo F767ZI (BBE)
Overview
This is a set of Bridle’s board extensions (BBE) to the original Zephyr upstream board Nucleo F767ZI with some adaptions and improvement on Twister, Kconfig and Devicetree level.
List of extensions
Board YAML
add the missing features that this board supports and that Twister tests might depends on:
arduino_serial
Kconfig
activate self powered USB explicitly and set the maximum of electrical current consumption to 0㎃:
ST Nucleo F767ZI
Kconfig.defconfigconfig CDC_ACM_SERIAL_SELF_POWERED default y depends on USB_DEVICE_STACK_NEXT && USBD_CDC_ACM_CLASS config CDC_ACM_SERIAL_MAX_POWER default 0 if BOARD_NUCLEO_F767ZI # 0mA (self powered) depends on USB_DEVICE_STACK_NEXT && USBD_CDC_ACM_CLASS
change log level only in case of use the native USB device port
st,stm32-otgfswith CDC-ACM UARTzephyr,cdc-acm-uartas Zephyr console:CONFIG_USBD_CDC_ACM_LOG_LEVEL_CHOICE:=CONFIG_USBD_CDC_ACM_LOG_LEVEL_OFFCONFIG_UDC_DRIVER_LOG_LEVEL_CHOICE:=CONFIG_UDC_DRIVER_LOG_LEVEL_ERR
ST Nucleo F767ZI
Kconfig.defconfig# Workaround for not being able to have commas in macro arguments DT_CHOSEN_Z_CONSOLE := zephyr,console DT_COMPAT_Z_CDC_ACM_UART := zephyr,cdc-acm-uart DT_COMPAT_STM32_USB := st,stm32-otgfs # Macros to shorten Kconfig expressions DT_CHOSEN_CONSOLE_NODE := $(dt_chosen_path,$(DT_CHOSEN_Z_CONSOLE)) DT_CHOSEN_CONSOLE_PARENT := $(dt_node_parent,$(DT_CHOSEN_CONSOLE_NODE)) if BOARD_NUCLEO_F767ZI && \ $(dt_chosen_enabled,$(DT_CHOSEN_Z_CONSOLE)) && \ $(dt_compat_on_bus,$(DT_COMPAT_Z_CDC_ACM_UART),usb) && \ $(dt_node_has_compat,$(DT_CHOSEN_CONSOLE_PARENT),$(DT_COMPAT_STM32_USB)) # Logger cannot use itself to log choice USBD_CDC_ACM_LOG_LEVEL_CHOICE default USBD_CDC_ACM_LOG_LEVEL_OFF depends on LOG && USB_DEVICE_STACK_NEXT && USBD_CDC_ACM_CLASS endchoice # Set USB log level to error only choice USBD_LOG_LEVEL_CHOICE default USBD_LOG_LEVEL_ERR depends on LOG && USB_DEVICE_STACK_NEXT && USBD_CDC_ACM_CLASS endchoice # Set UDC driver log level to error only choice UDC_DRIVER_LOG_LEVEL_CHOICE default UDC_DRIVER_LOG_LEVEL_ERR depends on LOG && USB_DEVICE_STACK_NEXT && USBD_CDC_ACM_CLASS endchoice endif # zephyr,cdc-acm-uart
Devicetree
set default entries for
modelandcompatibleof the boards:ST Nucleo F767ZI
nucleo_f767zi_bbe.dts/ { model = "STMicroelectronics STM32F767ZI-NUCLEO board @ UART Concole (BBE)"; compatible = "st,stm32f767zi-nucleo", "st,stm32f767zi-nucleo-bbe", "st,stm32f767zi-nucleo-uartcons", "st,stm32f767zi-nucleo-uartcons-bbe"; };