:orphan:
.. raw:: html
.. dtcompatible:: infineon,hppass-csg-comp
.. _dtbinding_infineon_hppass_csg_comp:
infineon,hppass-csg-comp
########################
.. sidebar:: Overview
:Name: ``infineon,hppass-csg-comp``
:Vendor: :ref:`Infineon Technologies `
:Used in: :zephyr:board-catalog:`List of boards <#compatibles=infineon,hppass-csg-comp>` using
this compatible
:Driver: :zephyr_file:`drivers/comparator/comparator_infineon_hppass_csg.c`
Description
***********
.. code-block:: none
Infineon HPPASS CSG comparator.
One instance represents the comparator inside a CSG slice. This
node must be a child of an "infineon,hppass-csg" CSG MFD parent.
The comparator's negative input may select either the paired in-slice
DAC output or one of two external analog inputs (AIN_NA, AIN_NB):
- When negative-input = "dac", the paired DAC must also be configured
and enabled.
- When negative-input = "ain-na" or "ain-nb", the comparator operates
as a standalone analog-only comparator and the paired DAC is unused.
The CSG MFD parent owns the combined comparator interrupt and dispatches
callbacks.
Properties
**********
.. tabs::
.. group-tab:: Node specific properties
Properties not inherited from the base binding file.
.. list-table::
:widths: 1 1 4
:header-rows: 1
* - Name
- Type
- Details
* - ``positive-input``
- ``string``
- .. code-block:: none
Selects the comparator's positive input source (CMP_CFG.CMP_POS_SEL):
- "ain-pa": external analog input AIN_PA
- "ain-pb": external analog input AIN_PB
This property is **required**.
Legal values: ``ain-pa``, ``ain-pb``
* - ``negative-input``
- ``string``
- .. code-block:: none
Selects the comparator's negative input source (CMP_CFG.CMP_NEG_SEL):
- "dac": paired in-slice DAC output (default operating mode)
- "ain-na": external analog input AIN_NA (standalone comparator)
- "ain-nb": external analog input AIN_NB (standalone comparator)
This property is **required**.
Legal values: ``dac``, ``ain-na``, ``ain-nb``
* - ``invert-output``
- ``boolean``
- .. code-block:: none
Invert the digital comparator output before edge detection, blanking
and status visibility (CMP_CFG.CMP_POLARITY).
* - ``blank-mode``
- ``string``
- .. code-block:: none
Comparator output blanking mode (CMP_CFG.CMP_BLANK_MODE).
Blanking gates the comparator output to inactive while a selected
external trigger is asserted, preventing a trip on a transient condition.
- "disabled": no blanking applied
- "gate-on-one": comparator output is forced inactive while the
selected blanking trigger is high
- "gate-on-zero": comparator output is forced inactive while the
selected blanking trigger is low
Default value: ``disabled``
Legal values: ``disabled``, ``gate-on-one``, ``gate-on-zero``
* - ``blank-trigger-sel``
- ``string``
- .. code-block:: none
Selects which HPPASS trigger input gates the comparator output when
blank-mode is enabled (CMP_CFG.CMP_BLANK_TR_SEL). Trigger sources
"tr0".."tr7" correspond to the eight HPPASS trigger inputs
configured on the parent "infineon,hppass-analog" node.
Default value: ``disabled``
Legal values: ``disabled``, ``tr0``, ``tr1``, ``tr2``, ``tr3``, ``tr4``, ``tr5``, ``tr6``, ``tr7``
.. group-tab:: Deprecated node specific properties
Deprecated properties not inherited from the base binding file.
(None)
.. group-tab:: Base properties
Properties inherited from the base binding file, which defines
common properties that may be set on many nodes. Not all of these
may apply to the "infineon,hppass-csg-comp" compatible.
.. list-table::
:widths: 1 1 4
:header-rows: 1
* - Name
- Type
- Details
* - ``reg``
- ``array``
- .. code-block:: none
Register region for this slice's CMP_CFG within the CSG block.
Slice index is derived at compile time from the offset divided
by the CSG slice stride.
This property is **required**.
See :ref:`zephyr:dt-important-props` for more information.
* - ``status``
- ``string``
- .. code-block:: none
Indicates the operational status of the hardware or other
resource that the node represents. In particular:
- "okay" means the resource is operational and, for example,
can be used by device drivers
- "disabled" means the resource is not operational and the system
should treat it as if it is not present
For details, see "2.3.4 status" in Devicetree Specification v0.4.
Legal values: ``okay``, ``disabled``, ``reserved``, ``fail``, ``fail-sss``
See :ref:`zephyr:dt-important-props` for more information.
* - ``compatible``
- ``string-array``
- .. code-block:: none
This property is a list of strings that essentially define what
type of hardware or other resource this devicetree node
represents. Each device driver checks for specific compatible
property values to find the devicetree nodes that represent
resources that the driver should manage.
The recommended format is "vendor,device", The "vendor" part is
an abbreviated name of the vendor. The "device" is usually from
the datasheet.
The compatible property can have multiple values, ordered from
most- to least-specific. Having additional values is useful when the
device is a specific instance of a more general family, to allow the
system to match the most specific driver available.
For details, see "2.3.1 compatible" in Devicetree Specification v0.4.
This property is **required**.
See :ref:`zephyr:dt-important-props` for more information.
* - ``reg-names``
- ``string-array``
- .. code-block:: none
Optional names given to each register block in the "reg" property.
For example:
/ {
soc {
#address-cells = <1>;
#size-cells = <1>;
uart@1000 {
reg = <0x1000 0x2000>, <0x3000 0x4000>;
reg-names = "foo", "bar";
};
};
};
The uart@1000 node has two register blocks:
- one with base address 0x1000, size 0x2000, and name "foo"
- another with base address 0x3000, size 0x4000, and name "bar"
* - ``ranges``
- ``compound``
- .. code-block:: none
Information used to define a mapping (or translation) between the address
space of a bus (the "child address space") and the address space of the
bus node's parent (the "parent address space").
The "ranges" property is typically empty, or a sequence of triplets
(child bus address, parent bus address, length).
If the "ranges" property is empty, it specifies that the parent and child
address spaces are identical and no address translation is required.
If the "ranges" property is not present in a bus node, it is assumed that
no mapping exists between children of the node and the parent address space.
For details, see "2.3.8 ranges" in Devicetree Specification v0.4.
* - ``interrupts``
- ``array``
- .. code-block:: none
Information about interrupts generated by the device, encoded as an array
of one or more interrupt specifiers. The format of the data in this property
varies by where the device appears in the interrupt tree. Devices with the same
"interrupt-parent" will use the same format in their interrupts properties.
For details, see "2.4 Interrupts and Interrupt Mapping" in
Devicetree Specification v0.4.
See :ref:`zephyr:dt-important-props` for more information.
* - ``interrupts-extended``
- ``compound``
- .. code-block:: none
Extended interrupt specifier for device, used as an alternative to
the "interrupts" property.
For details, see "2.4 Interrupts and Interrupt Mapping" in
Devicetree Specification v0.4.
* - ``interrupt-names``
- ``string-array``
- .. code-block:: none
Optional names given to each interrupt generated by a device.
The interrupts themselves are defined in either "interrupts" or
"interrupts-extended" properties.
For details, see "2.4 Interrupts and Interrupt Mapping" in
Devicetree Specification v0.4.
* - ``interrupt-parent``
- ``phandle``
- .. code-block:: none
If present, this refers to the node which handles interrupts generated
by this device.
For details, see "2.4 Interrupts and Interrupt Mapping" in
Devicetree Specification v0.4.
* - ``label``
- ``string``
- .. code-block:: none
Human readable string describing the device. Use of this property is
deprecated except as needed on a case-by-case basis.
For details, see "4.1.2 Miscellaneous Properties" in Devicetree
Specification v0.4.
See :ref:`zephyr:dt-important-props` for more information.
* - ``clocks``
- ``phandle-array``
- .. code-block:: none
Information about the device's clock providers. In general, this property
should follow conventions established in the dt-schema binding:
https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/clock/clock.yaml
* - ``clock-names``
- ``string-array``
- .. code-block:: none
Optional names given to each clock provider in the "clocks" property.
* - ``#address-cells``
- ``int``
- .. code-block:: none
This property encodes the number of cells used by address fields
in "reg" properties in this node's children.
For details, see "2.3.5 #address-cells and #size-cells" in Devicetree
Specification v0.4.
* - ``#size-cells``
- ``int``
- .. code-block:: none
This property encodes the number of cells used by size fields in
"reg" properties in this node's children.
For details, see "2.3.5 #address-cells and #size-cells" in Devicetree
Specification v0.4.
* - ``dma-coherent``
- ``boolean``
- .. code-block:: none
Indicates that the device is capable of coherent DMA operations.
For details, see "2.3.10 dma-coherent" in Devicetree Specification v0.4.
* - ``dmas``
- ``phandle-array``
- .. code-block:: none
DMA channel specifiers relevant to the device.
* - ``dma-names``
- ``string-array``
- .. code-block:: none
Optional names given to the DMA channel specifiers in the "dmas" property.
* - ``dma-ranges``
- ``compound``
- .. code-block:: none
The dma-ranges provides a means of defining a mapping or translation between the
physical address space of the bus and the physical address space of the parent of the bus.
For details, see "2.3.9 dma-ranges" in Devicetree Specification v0.4.
* - ``io-channels``
- ``phandle-array``
- .. code-block:: none
IO channel specifiers relevant to the device.
* - ``io-channel-names``
- ``string-array``
- .. code-block:: none
Optional names given to the IO channel specifiers in the "io-channels" property.
* - ``mboxes``
- ``phandle-array``
- .. code-block:: none
Mailbox / IPM channel specifiers relevant to the device.
* - ``mbox-names``
- ``string-array``
- .. code-block:: none
Optional names given to the mbox specifiers in the "mboxes" property.
* - ``power-domains``
- ``phandle-array``
- .. code-block:: none
Power domain specifiers relevant to the device.
* - ``power-domain-names``
- ``string-array``
- .. code-block:: none
Optional names given to the power domain specifiers in the "power-domains" property.
* - ``#power-domain-cells``
- ``int``
- .. code-block:: none
Number of cells in power-domains property
* - ``hwlocks``
- ``phandle-array``
- .. code-block:: none
HW spinlock id relevant to the device.
* - ``hwlock-names``
- ``string-array``
- .. code-block:: none
Optional names given to the hwlock specifiers in the "hwlocks" property.
* - ``zephyr,deferred-init``
- ``boolean``
- .. code-block:: none
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
* - ``wakeup-source``
- ``boolean``
- .. code-block:: none
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
* - ``zephyr,pm-device-runtime-auto``
- ``boolean``
- .. code-block:: none
Automatically configure the device for runtime power management after the
init function runs.
* - ``zephyr,disabling-power-states``
- ``phandles``
- .. code-block:: none
List of power states that will disable this device power.