espressif,riscv

Vendor: Espressif Systems

Description

Espressif RISC-V CPU

Properties

Node specific properties

Properties not inherited from the base binding file.

Name	Type	Details
clock-source	int	Defines the CPU clock source, each corresponding to different frequencies: - 0: ESP32_CPU_CLK_SRC_XTAL - Uses the external crystal clock typically at 40 MHz. - 1: ESP32_CPU_CLK_SRC_PLL - Utilizes an internal PLL which operates at either 320 MHz or 480 MHz. - 2: ESP32_CPU_CLK_SRC_RC_FAST - Employs an internal fast RC oscillator with frequency of 17.5 MHz. This property is required. Legal values: 0, 1, 2
xtal-freq	int	Value of the external XTAL connected to ESP32. This is typically 40 MHz. This property is required. Legal values: 26000000, 32000000, 40000000
mmu-type	string	Memory Management Unit (MMU) Legal values: 'riscv,sv32', 'riscv,sv39', 'riscv,sv48', 'riscv,none'
riscv,isa	string	RISC-V instruction set architecture This property is required.
clock-frequency	int	Clock frequency in Hz
cpu-power-states	phandles	List of power management states supported by this cpu
i-cache-line-size	int	i-cache line size
d-cache-line-size	int	d-cache line size
enable-method	string	Enable method for cpu, either it is "psci" or "spin-table"

Deprecated node specific properties

Deprecated properties not inherited from the base binding file.

(None)

Base properties

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “espressif,riscv” compatible.

Name	Type	Details
status	string	indicates the operational status of a device Legal values: 'ok', 'okay', 'disabled', 'reserved', 'fail', 'fail-sss' See Important properties for more information.
compatible	string-array	compatible strings This property is required. See Important properties for more information.
reg	array	register space See Important properties for more information.
reg-names	string-array	name of each register space
interrupts	array	interrupts for device See Important properties for more information.
interrupts-extended	compound	extended interrupt specifier for device
interrupt-names	string-array	name of each interrupt
interrupt-parent	phandle	phandle to interrupt controller node
label	string	Human readable string describing the device (used as device_get_binding() argument) See Important properties for more information. This property is deprecated.
clocks	phandle-array	Clock gate information
clock-names	string-array	name of each clock
#address-cells	int	number of address cells in reg property
#size-cells	int	number of size cells in reg property
dmas	phandle-array	DMA channels specifiers
dma-names	string-array	Provided names of DMA channel specifiers
io-channels	phandle-array	IO channels specifiers
io-channel-names	string-array	Provided names of IO channel specifiers
mboxes	phandle-array	mailbox / IPM channels specifiers
mbox-names	string-array	Provided names of mailbox / IPM channel specifiers
power-domains	phandle-array	Power domain specifiers
power-domain-names	string-array	Provided names of power domain specifiers
#power-domain-cells	int	Number of cells in power-domains property
zephyr,deferred-init	boolean	Do not initialize device automatically on boot. Device should be manually initialized using device_init().
wakeup-source	boolean	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.
zephyr,pm-device-runtime-auto	boolean	Automatically configure the device for runtime power management after the init function runs.
zephyr,disabling-power-states	phandles	List of power states that will disable this device power.