Zephyr Project API 4.2.99
A Scalable Open Source RTOS
|
List of specification defined Health fault values. More...
List of specification defined Health fault values.
#define BT_MESH_HEALTH_FAULT_ACTUATOR_BLOCKED_ERROR 0x22 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Actuator Blocked Error.
#define BT_MESH_HEALTH_FAULT_ACTUATOR_BLOCKED_WARNING 0x21 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Actuator Blocked Warning.
#define BT_MESH_HEALTH_FAULT_BATTERY_LOW_ERROR 0x02 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Battery Low Error.
#define BT_MESH_HEALTH_FAULT_BATTERY_LOW_WARNING 0x01 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Battery Low Warning.
#define BT_MESH_HEALTH_FAULT_CONDENSATION_ERROR 0x10 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Condensation Error.
#define BT_MESH_HEALTH_FAULT_CONDENSATION_WARNING 0x0F |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Condensation Warning.
#define BT_MESH_HEALTH_FAULT_CONFIGURATION_ERROR 0x14 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Configuration Error.
#define BT_MESH_HEALTH_FAULT_CONFIGURATION_WARNING 0x13 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Configuration Warning.
#define BT_MESH_HEALTH_FAULT_DEVICE_DROPPED_ERROR 0x2A |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Device Dropped Error.
#define BT_MESH_HEALTH_FAULT_DEVICE_DROPPED_WARNING 0x29 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Device Dropped Warning.
#define BT_MESH_HEALTH_FAULT_DEVICE_MOVED_ERROR 0x28 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Device Moved Error.
#define BT_MESH_HEALTH_FAULT_DEVICE_MOVED_WARNING 0x27 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Device Moved Warning.
#define BT_MESH_HEALTH_FAULT_ELEMENT_NOT_CALIBRATED_ERROR 0x16 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Element Not Calibrated Error.
#define BT_MESH_HEALTH_FAULT_ELEMENT_NOT_CALIBRATED_WARNING 0x15 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Element Not Calibrated Warning.
#define BT_MESH_HEALTH_FAULT_EMPTY_ERROR 0x2E |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Empty Error.
#define BT_MESH_HEALTH_FAULT_EMPTY_WARNING 0x2D |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Empty Warning.
#define BT_MESH_HEALTH_FAULT_HOUSING_OPENED_ERROR 0x24 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Housing Opened Error.
#define BT_MESH_HEALTH_FAULT_HOUSING_OPENED_WARNING 0x23 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Housing Opened Warning.
#define BT_MESH_HEALTH_FAULT_INPUT_NO_CHANGE_ERROR 0x20 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Input No Change Error.
#define BT_MESH_HEALTH_FAULT_INPUT_NO_CHANGE_WARNING 0x1F |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Input No Change Warning.
#define BT_MESH_HEALTH_FAULT_INPUT_TOO_HIGH_ERROR 0x1E |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Input Too High Error.
#define BT_MESH_HEALTH_FAULT_INPUT_TOO_HIGH_WARNING 0x1D |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Input Too High Warning.
#define BT_MESH_HEALTH_FAULT_INPUT_TOO_LOW_ERROR 0x1C |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Input Too Low Error.
#define BT_MESH_HEALTH_FAULT_INPUT_TOO_LOW_WARNING 0x1B |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Input Too Low Warning.
#define BT_MESH_HEALTH_FAULT_INTERNAL_BUS_ERROR 0x30 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Internal Bus Error.
#define BT_MESH_HEALTH_FAULT_INTERNAL_BUS_WARNING 0x2F |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Internal Bus Warning.
#define BT_MESH_HEALTH_FAULT_MECHANISM_JAMMED_ERROR 0x32 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Mechanism Jammed Error.
#define BT_MESH_HEALTH_FAULT_MECHANISM_JAMMED_WARNING 0x31 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Mechanism Jammed Warning.
#define BT_MESH_HEALTH_FAULT_MEMORY_ERROR 0x18 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Memory Error.
#define BT_MESH_HEALTH_FAULT_MEMORY_WARNING 0x17 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Memory Warning.
#define BT_MESH_HEALTH_FAULT_NO_FAULT 0x00 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
No fault has occurred.
#define BT_MESH_HEALTH_FAULT_NO_LOAD_ERROR 0x0A |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
No Load Error.
#define BT_MESH_HEALTH_FAULT_NO_LOAD_WARNING 0x09 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
No Load Warning.
#define BT_MESH_HEALTH_FAULT_OVERFLOW_ERROR 0x2C |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Overflow Error.
#define BT_MESH_HEALTH_FAULT_OVERFLOW_WARNING 0x2B |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Overflow Warning.
#define BT_MESH_HEALTH_FAULT_OVERHEAT_ERROR 0x0E |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Overheat Error.
#define BT_MESH_HEALTH_FAULT_OVERHEAT_WARNING 0x0D |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Overheat Warning.
#define BT_MESH_HEALTH_FAULT_OVERLOAD_ERROR 0x0C |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Overload Error.
#define BT_MESH_HEALTH_FAULT_OVERLOAD_WARNING 0x0B |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Overload Warning.
#define BT_MESH_HEALTH_FAULT_POWER_SUPPLY_INTERRUPTED_ERROR 0x08 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Power Supply Interrupted Error.
#define BT_MESH_HEALTH_FAULT_POWER_SUPPLY_INTERRUPTED_WARNING 0x07 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Power Supply Interrupted Warning.
#define BT_MESH_HEALTH_FAULT_SELF_TEST_ERROR 0x1A |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Self-Test Error.
#define BT_MESH_HEALTH_FAULT_SELF_TEST_WARNING 0x19 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Self-Test Warning.
#define BT_MESH_HEALTH_FAULT_SUPPLY_VOLTAGE_TOO_HIGH_ERROR 0x06 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Supply Voltage Too High Error.
#define BT_MESH_HEALTH_FAULT_SUPPLY_VOLTAGE_TOO_HIGH_WARNING 0x05 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Supply Voltage Too High Warning.
#define BT_MESH_HEALTH_FAULT_SUPPLY_VOLTAGE_TOO_LOW_ERROR 0x04 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Supply Voltage Too Low Error.
#define BT_MESH_HEALTH_FAULT_SUPPLY_VOLTAGE_TOO_LOW_WARNING 0x03 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Supply Voltage Too Low Warning.
#define BT_MESH_HEALTH_FAULT_TAMPER_ERROR 0x26 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Tamper Error.
#define BT_MESH_HEALTH_FAULT_TAMPER_WARNING 0x25 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Tamper Warning.
#define BT_MESH_HEALTH_FAULT_VENDOR_SPECIFIC_START 0x80 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Start of the vendor specific fault values.
All values below this are reserved for the Bluetooth Specification.
#define BT_MESH_HEALTH_FAULT_VIBRATION_ERROR 0x12 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Vibration Error.
#define BT_MESH_HEALTH_FAULT_VIBRATION_WARNING 0x11 |
#include <include/zephyr/bluetooth/mesh/health_faults.h>
Vibration Warning.