Device memory-mapped IO management

Definitions and helper macros for managing driver memory-mapped input/output (MMIO) regions appropriately in either RAM or ROM. More...

Modules
	Named MMIO region macros
	For drivers which need to manage multiple MMIO regions, which will be referenced by name.
	Single MMIO region macros
	For drivers which need to manage just one MMIO region, the most common case.
	Top-level MMIO region macros
	For drivers which do not use Zephyr's driver model and do not associate struct device with a driver instance.

Macros
#define	DEVICE_MMIO_IS_IN_RAM

Functions
static __boot_func void	device_map (mm_reg_t *virt_addr, uintptr_t phys_addr, size_t size, uint32_t flags)
	Set linear address for device MMIO access.

Detailed Description

Definitions and helper macros for managing driver memory-mapped input/output (MMIO) regions appropriately in either RAM or ROM.

In most cases drivers will just want to include device.h, but including this separately may be needed for arch-level driver code which uses the DEVICE_MMIO_TOPLEVEL variants and including the main device.h would introduce header dependency loops due to that header's reliance on kernel.h.

Macro Definition Documentation

DEVICE_MMIO_IS_IN_RAM

#define DEVICE_MMIO_IS_IN_RAM

#include <include/zephyr/sys/device_mmio.h>

Function Documentation

device_map()

static __boot_func void device_map ( mm_reg_t *  virt_addr, uintptr_t  phys_addr, size_t  size, uint32_t  flags  )

inlinestatic

#include <include/zephyr/sys/device_mmio.h>

Set linear address for device MMIO access.

This function sets the virt_addr parameter to the correct linear address for the MMIO region.

If the MMU is enabled, mappings may be created in the page tables.

Normally, only a caching mode needs to be set for the 'flags' parameter. The mapped linear address will have read-write access to supervisor mode.

See also

k_map()

Parameters

[out]	virt_addr	Output linear address storage location, most users will want some DEVICE_MMIO_RAM_PTR() value
[in]	phys_addr	Physical address base of the MMIO region
[in]	size	Size of the MMIO region
[in]	flags	Caching mode and access flags, see K_MEM_CACHE_* and K_MEM_PERM_* macros