FT8xx reference API. More...

Macros
#define	OPT_3D FT8XX_OPT_3D
	Co-processor widget is drawn in 3D effect.

#define	OPT_RGB565 FT8XX_OPT_RGB565
	Co-processor option to decode the JPEG image to RGB565 format.

#define	OPT_MONO FT8XX_OPT_MONO
	Co-processor option to decode the JPEG image to L8 format, i.e., monochrome.

#define	OPT_NODL FT8XX_OPT_NODL
	No display list commands generated for bitmap decoded from JPEG image.

#define	OPT_FLAT FT8XX_OPT_FLAT
	Co-processor widget is drawn without 3D effect.

#define	OPT_SIGNED FT8XX_OPT_SIGNED
	The number is treated as 32 bit signed integer.

#define	OPT_CENTERX FT8XX_OPT_CENTERX
	Co-processor widget centers horizontally.

#define	OPT_CENTERY FT8XX_OPT_CENTERY
	Co-processor widget centers vertically.

#define	OPT_CENTER FT8XX_OPT_CENTER
	Co-processor widget centers horizontally and vertically.

#define	OPT_RIGHTX FT8XX_OPT_RIGHTX
	The label on the Coprocessor widget is right justified.

#define	OPT_NOBACK FT8XX_OPT_NOBACK
	Co-processor widget has no background drawn.

#define	OPT_NOTICKS FT8XX_OPT_NOTICKS
	Co-processor clock widget is drawn without hour ticks.

#define	OPT_NOHM FT8XX_OPT_NOHM
	Co-processor clock widget is drawn without hour and minutes hands, only seconds hand is drawn.

#define	OPT_NOPOINTER FT8XX_OPT_NOPOINTER
	The Co-processor gauge has no pointer.

#define	OPT_NOSECS FT8XX_OPT_NOSECS
	Co-processor clock widget is drawn without seconds hand.

#define	OPT_NOHANDS FT8XX_OPT_NOHANDS
	Co-processor clock widget is drawn without hour, minutes and seconds hands.

#define	BITMAPS FT8XX_BITMAPS
	Rectangular pixel arrays, in various color formats.

#define	POINTS FT8XX_POINTS
	Anti-aliased points, point radius is 1-256 pixels.

#define	LINES FT8XX_LINES
	Anti-aliased lines, with width from 0 to 4095 1/16th of pixel units.

#define	LINE_STRIP FT8XX_LINE_STRIP
	Anti-aliased lines, connected head-to-tail.

#define	EDGE_STRIP_R FT8XX_EDGE_STRIP_R
	Edge strips for right.

#define	EDGE_STRIP_L FT8XX_EDGE_STRIP_L
	Edge strips for left.

#define	EDGE_STRIP_A FT8XX_EDGE_STRIP_A
	Edge strips for above.

#define	EDGE_STRIP_B FT8XX_EDGE_STRIP_B
	Edge strips for below.

#define	RECTS FT8XX_RECTS
	Round-cornered rectangles, curvature of the corners can be adjusted using LINE_WIDTH.

#define	BEGIN(prim) FT8XX_BEGIN(prim)
	Begin drawing a graphics primitive.

#define	CLEAR(c, s, t) FT8XX_CLEAR(c, s, t)
	Clear buffers to preset values.

#define	CLEAR_COLOR_RGB(red, green, blue) FT8XX_CLEAR_COLOR_RGB(red, green, blue)
	Specify clear values for red, green and blue channels.

#define	COLOR_RGB(red, green, blue) FT8XX_COLOR_RGB(red, green, blue)
	Set the current color red, green and blue.

#define	DISPLAY() FT8XX_DISPLAY()
	End the display list.

#define	END() FT8XX_END()
	End drawing a graphics primitive.

#define	LINE_WIDTH(width) FT8XX_LINE_WIDTH(width)
	Specify the width of lines to be drawn with primitive LINES.

#define	TAG(s) FT8XX_TAG(s)
	Attach the tag value for the following graphics objects.

#define	VERTEX2F(x, y) FT8XX_VERTEX2F(x, y)
	Start the operation of graphics primitives at the specified coordinate.

#define	VERTEX2II(x, y, handle, cell) FT8XX_VERTEX2II(x, y, handle, cell)
	Start the operation of graphics primitive at the specified coordinates.

Enumerations
enum	ft8xx_memory_map_t { RAM_G = FT810_RAM_G , RAM_DL = FT810_RAM_DL , REG_ = FT810_REG_ , RAM_CMD = FT810_RAM_CMD }
	Main parts of FT810 memory map. More...

enum	ft8xx_register_address_t { REG_TRIM = FT810_REG_TRIM , REG_ID = FT810_REG_ID , REG_FRAMES = FT810_REG_FRAMES , REG_CLOCK = FT810_REG_CLOCK , REG_FREQUENCY = FT810_REG_FREQUENCY , REG_RENDERMODE = FT810_REG_RENDERMODE , REG_SNAPY = FT810_REG_SNAPY , REG_SNAPSHOT = FT810_REG_SNAPSHOT , REG_CPURESET = FT810_REG_CPURESET , REG_TAP_CRC = FT810_REG_TAP_CRC , REG_TAP_MASK = FT810_REG_TAP_MASK , REG_HCYCLE = FT810_REG_HCYCLE , REG_HOFFSET = FT810_REG_HOFFSET , REG_HSIZE = FT810_REG_HSIZE , REG_HSYNC0 = FT810_REG_HSYNC0 , REG_HSYNC1 = FT810_REG_HSYNC1 , REG_VCYCLE = FT810_REG_VCYCLE , REG_VOFFSET = FT810_REG_VOFFSET , REG_VSIZE = FT810_REG_VSIZE , REG_VSYNC0 = FT810_REG_VSYNC0 , REG_VSYNC1 = FT810_REG_VSYNC1 , REG_DLSWAP = FT810_REG_DLSWAP , REG_ROTATE = FT810_REG_ROTATE , REG_OUTBITS = FT810_REG_OUTBITS , REG_DITHER = FT810_REG_DITHER , REG_SWIZZLE = FT810_REG_SWIZZLE , REG_CSPREAD = FT810_REG_CSPREAD , REG_PCLK_POL = FT810_REG_PCLK_POL , REG_PCLK = FT810_REG_PCLK , REG_TAG_X = FT810_REG_TAG_X , REG_TAG_Y = FT810_REG_TAG_Y , REG_TAG = FT810_REG_TAG , REG_VOL_PB = FT810_REG_VOL_PB , REG_VOL_SOUND = FT810_REG_VOL_SOUND , REG_SOUND = FT810_REG_SOUND , REG_PLAY = FT810_REG_PLAY , REG_GPIO_DIR = FT810_REG_GPIO_DIR , REG_GPIO = FT810_REG_GPIO , REG_GPIOX_DIR = FT810_REG_GPIOX_DIR , REG_GPIOX = FT810_REG_GPIOX , REG_INT_FLAGS = FT810_REG_INT_FLAGS , REG_INT_EN = FT810_REG_INT_EN , REG_INT_MASK = FT810_REG_INT_MASK , REG_PLAYBACK_START = FT810_REG_PLAYBACK_START , REG_PLAYBACK_LENGTH = FT810_REG_PLAYBACK_LENGTH , REG_PLAYBACK_READPTR = FT810_REG_PLAYBACK_READPTR , REG_PLAYBACK_FREQ = FT810_REG_PLAYBACK_FREQ , REG_PLAYBACK_FORMAT = FT810_REG_PLAYBACK_FORMAT , REG_PLAYBACK_LOOP = FT810_REG_PLAYBACK_LOOP , REG_PLAYBACK_PLAY = FT810_REG_PLAYBACK_PLAY , REG_PWM_HZ = FT810_REG_PWM_HZ , REG_PWM_DUTY = FT810_REG_PWM_DUTY , REG_CMD_READ = FT810_REG_CMD_READ , REG_CMD_WRITE = FT810_REG_CMD_WRITE , REG_CMD_DL = FT810_REG_CMD_DL , REG_TOUCH_MODE = FT810_REG_TOUCH_MODE , REG_TOUCH_ADC_MODE = FT810_REG_TOUCH_ADC_MODE , REG_TOUCH_CHARGE = FT810_REG_TOUCH_CHARGE , REG_TOUCH_SETTLE = FT810_REG_TOUCH_SETTLE , REG_TOUCH_OVERSAMPLE = FT810_REG_TOUCH_OVERSAMPLE , REG_TOUCH_RZTHRESH = FT810_REG_TOUCH_RZTHRESH , REG_TOUCH_RAW_XY = FT810_REG_TOUCH_RAW_XY , REG_TOUCH_RZ = FT810_REG_TOUCH_RZ , REG_TOUCH_SCREEN_XY = FT810_REG_TOUCH_SCREEN_XY , REG_TOUCH_TAG_XY = FT810_REG_TOUCH_TAG_XY , REG_TOUCH_TAG = FT810_REG_TOUCH_TAG , REG_TOUCH_TRANSFORM_A = FT810_REG_TOUCH_TRANSFORM_A , REG_TOUCH_TRANSFORM_B = FT810_REG_TOUCH_TRANSFORM_B , REG_TOUCH_TRANSFORM_C = FT810_REG_TOUCH_TRANSFORM_C , REG_TOUCH_TRANSFORM_D = FT810_REG_TOUCH_TRANSFORM_D , REG_TOUCH_TRANSFORM_E = FT810_REG_TOUCH_TRANSFORM_E , REG_TOUCH_TRANSFORM_F = FT810_REG_TOUCH_TRANSFORM_F , REG_TOUCH_CONFIG = FT810_REG_TOUCH_CONFIG , REG_SPI_WIDTH = FT810_REG_SPI_WIDTH , REG_TOUCH_DIRECT_XY = FT810_REG_TOUCH_DIRECT_XY , REG_TOUCH_DIRECT_Z1Z2 = FT810_REG_TOUCH_DIRECT_Z1Z2 , REG_CMDB_SPACE = FT810_REG_CMDB_SPACE , REG_CMDB_WRITE = FT810_REG_CMDB_WRITE , REG_TRACKER = FT810_REG_TRACKER , REG_TRACKER1 = FT810_REG_TRACKER1 , REG_TRACKER2 = FT810_REG_TRACKER2 , REG_TRACKER3 = FT810_REG_TRACKER3 , REG_TRACKER4 = FT810_REG_TRACKER4 , REG_MEDIAFIFO_READ = FT810_REG_MEDIAFIFO_READ , REG_MEDIAFIFO_WRITE = FT810_REG_MEDIAFIFO_WRITE }
	FT810 register addresses. More...

Functions
static void	wr8 (uint32_t address, uint8_t data)
	Write 1 byte (8 bits) to FT8xx memory.

static void	wr16 (uint32_t address, uint16_t data)
	Write 2 bytes (16 bits) to FT8xx memory.

static void	wr32 (uint32_t address, uint32_t data)
	Write 4 bytes (32 bits) to FT8xx memory.

static uint8_t	rd8 (uint32_t address)
	Read 1 byte (8 bits) from FT8xx memory.

static uint16_t	rd16 (uint32_t address)
	Read 2 bytes (16 bits) from FT8xx memory.

static uint32_t	rd32 (uint32_t address)
	Read 4 bytes (32 bits) from FT8xx memory.

static void	cmd (uint32_t command)
	Execute a display list command by co-processor engine.

static void	cmd_dlstart (void)
	Start a new display list.

static void	cmd_swap (void)
	Swap the current display list.

static void	cmd_text (int16_t x, int16_t y, int16_t font, uint16_t options, const char *s)
	Draw text.

static void	cmd_number (int16_t x, int16_t y, int16_t font, uint16_t options, int32_t n)
	Draw a decimal number.

static void	cmd_calibrate (uint32_t *result)
	Execute the touch screen calibration routine.

Detailed Description

FT8xx reference API.

API defined according to FT800 Programmers Guide API reference definition.

Note: Function names defined in this header may easily collide with names provided by other modules. Include this header with caution. If naming conflict occurs instead of including this header, use ft8xx_ prefixed names.

Macro Definition Documentation

◆ BEGIN

#define BEGIN ( prim ) FT8XX_BEGIN(prim)

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Begin drawing a graphics primitive.

The valid primitives are defined as:

The primitive to be drawn is selected by the BEGIN command. Once the primitive is selected, it will be valid till the new primitive is selected by the BEGIN command.

Note: The primitive drawing operation will not be performed until VERTEX2II or VERTEX2F is executed.

Parameters

prim	Graphics primitive

◆ BITMAPS

#define BITMAPS FT8XX_BITMAPS

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Rectangular pixel arrays, in various color formats.

◆ CLEAR

#define CLEAR	(	c,
		s,
		t
	)	FT8XX_CLEAR(c, s, t)

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Clear buffers to preset values.

Setting c to true will clear the color buffer of the FT8xx to the preset value. Setting this bit to false will maintain the color buffer of the FT8xx with an unchanged value. The preset value is defined in command CLEAR_COLOR_RGB for RGB channel and CLEAR_COLOR_A for alpha channel.

Setting s to true will clear the stencil buffer of the FT8xx to the preset value. Setting this bit to false will maintain the stencil buffer of the FT8xx with an unchanged value. The preset value is defined in command CLEAR_STENCIL.

Setting t to true will clear the tag buffer of the FT8xx to the preset value. Setting this bit to false will maintain the tag buffer of the FT8xx with an unchanged value. The preset value is defined in command CLEAR_TAG.

Parameters

c	Clear color buffer
s	Clear stencil buffer
t	Clear tag buffer

◆ CLEAR_COLOR_RGB

#define CLEAR_COLOR_RGB	(	red,
		green,
		blue
	)	FT8XX_CLEAR_COLOR_RGB(red, green, blue)

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Specify clear values for red, green and blue channels.

Sets the color values used by a following CLEAR.

Parameters

red	Red value used when the color buffer is cleared
green	Green value used when the color buffer is cleared
blue	Blue value used when the color buffer is cleared

◆ COLOR_RGB

#define COLOR_RGB	(	red,
		green,
		blue
	)	FT8XX_COLOR_RGB(red, green, blue)

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Set the current color red, green and blue.

Sets red, green and blue values of the FT8xx color buffer which will be applied to the following draw operation.

Parameters

red	Red value for the current color
green	Green value for the current color
blue	Blue value for the current color

◆ DISPLAY

#define DISPLAY ( ) FT8XX_DISPLAY()

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

End the display list.

FT8xx will ignore all the commands following this command.

◆ EDGE_STRIP_A

#define EDGE_STRIP_A FT8XX_EDGE_STRIP_A

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Edge strips for above.

◆ EDGE_STRIP_B

#define EDGE_STRIP_B FT8XX_EDGE_STRIP_B

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Edge strips for below.

◆ EDGE_STRIP_L

#define EDGE_STRIP_L FT8XX_EDGE_STRIP_L

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Edge strips for left.

◆ EDGE_STRIP_R

#define EDGE_STRIP_R FT8XX_EDGE_STRIP_R

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Edge strips for right.

◆ END

#define END ( ) FT8XX_END()

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

End drawing a graphics primitive.

It is recommended to have an END for each BEGIN. Whereas advanced users can avoid the usage of END in order to save extra graphics instructions in the display list RAM.

◆ LINE_STRIP

#define LINE_STRIP FT8XX_LINE_STRIP

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Anti-aliased lines, connected head-to-tail.

◆ LINE_WIDTH

#define LINE_WIDTH ( width ) FT8XX_LINE_WIDTH(width)

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Specify the width of lines to be drawn with primitive LINES.

Sets the width of drawn lines. The width is the distance from the center of the line to the outermost drawn pixel, in units of 1/16 pixel. The valid range is from 16 to 4095 in terms of 1/16th pixel units.

Note: The LINE_WIDTH command will affect the LINES, LINE_STRIP, RECTS, EDGE_STRIP_A /B/R/L primitives.

Parameters

width Line width in 1/16 pixel

◆ LINES

#define LINES FT8XX_LINES

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Anti-aliased lines, with width from 0 to 4095 1/16th of pixel units.

(width is from center of the line to boundary)

◆ OPT_3D

#define OPT_3D FT8XX_OPT_3D

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Co-processor widget is drawn in 3D effect.

◆ OPT_CENTER

#define OPT_CENTER FT8XX_OPT_CENTER

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Co-processor widget centers horizontally and vertically.

◆ OPT_CENTERX

#define OPT_CENTERX FT8XX_OPT_CENTERX

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Co-processor widget centers horizontally.

◆ OPT_CENTERY

#define OPT_CENTERY FT8XX_OPT_CENTERY

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Co-processor widget centers vertically.

◆ OPT_FLAT

#define OPT_FLAT FT8XX_OPT_FLAT

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Co-processor widget is drawn without 3D effect.

◆ OPT_MONO

#define OPT_MONO FT8XX_OPT_MONO

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Co-processor option to decode the JPEG image to L8 format, i.e., monochrome.

◆ OPT_NOBACK

#define OPT_NOBACK FT8XX_OPT_NOBACK

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Co-processor widget has no background drawn.

◆ OPT_NODL

#define OPT_NODL FT8XX_OPT_NODL

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

No display list commands generated for bitmap decoded from JPEG image.

◆ OPT_NOHANDS

#define OPT_NOHANDS FT8XX_OPT_NOHANDS

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Co-processor clock widget is drawn without hour, minutes and seconds hands.

◆ OPT_NOHM

#define OPT_NOHM FT8XX_OPT_NOHM

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Co-processor clock widget is drawn without hour and minutes hands, only seconds hand is drawn.

◆ OPT_NOPOINTER

#define OPT_NOPOINTER FT8XX_OPT_NOPOINTER

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

The Co-processor gauge has no pointer.

◆ OPT_NOSECS

#define OPT_NOSECS FT8XX_OPT_NOSECS

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Co-processor clock widget is drawn without seconds hand.

◆ OPT_NOTICKS

#define OPT_NOTICKS FT8XX_OPT_NOTICKS

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Co-processor clock widget is drawn without hour ticks.

Gauge widget is drawn without major and minor ticks.

◆ OPT_RGB565

#define OPT_RGB565 FT8XX_OPT_RGB565

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Co-processor option to decode the JPEG image to RGB565 format.

◆ OPT_RIGHTX

#define OPT_RIGHTX FT8XX_OPT_RIGHTX

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

The label on the Coprocessor widget is right justified.

◆ OPT_SIGNED

#define OPT_SIGNED FT8XX_OPT_SIGNED

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

The number is treated as 32 bit signed integer.

◆ POINTS

#define POINTS FT8XX_POINTS

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Anti-aliased points, point radius is 1-256 pixels.

◆ RECTS

#define RECTS FT8XX_RECTS

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Round-cornered rectangles, curvature of the corners can be adjusted using LINE_WIDTH.

◆ TAG

#define TAG ( s ) FT8XX_TAG(s)

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Attach the tag value for the following graphics objects.

The initial value of the tag buffer of the FT8xx is specified by command CLEAR_TAG and taken effect by command CLEAR. TAG command can specify the value of the tag buffer of the FT8xx that applies to the graphics objects when they are drawn on the screen. This TAG value will be assigned to all the following objects, unless the TAG_MASK command is used to disable it. Once the following graphics objects are drawn, they are attached with the tag value successfully. When the graphics objects attached with the tag value are touched, the register REG_TOUCH_TAG will be updated with the tag value of the graphics object being touched. If there is no TAG commands in one display list, all the graphics objects rendered by the display list will report tag value as 255 in REG_TOUCH_TAG when they were touched.

Parameters

s	Tag value 1-255

◆ VERTEX2F

#define VERTEX2F	(	x,
		y
	)	FT8XX_VERTEX2F(x, y)

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Start the operation of graphics primitives at the specified coordinate.

The range of coordinates is from -16384 to +16383 in terms of 1/16th pixel units. The negative x coordinate value means the coordinate in the left virtual screen from (0, 0), while the negative y coordinate value means the coordinate in the upper virtual screen from (0, 0). If drawing on the negative coordinate position, the drawing operation will not be visible.

Parameters

x	Signed x-coordinate in 1/16 pixel precision
y	Signed y-coordinate in 1/16 pixel precision

◆ VERTEX2II

#define VERTEX2II	(	x,
		y,
		handle,
		cell
	)	FT8XX_VERTEX2II(x, y, handle, cell)

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Start the operation of graphics primitive at the specified coordinates.

The valid range of handle is from 0 to 31. From 16 to 31 the bitmap handle is dedicated to the FT8xx built-in font.

Cell number is the index of bitmap with same bitmap layout and format. For example, for handle 31, the cell 65 means the character "A" in the largest built in font.

Parameters

x	x-coordinate in pixels, from 0 to 511
y	y-coordinate in pixels, from 0 to 511
handle	Bitmap handle
cell	Cell number

Enumeration Type Documentation

◆ ft8xx_memory_map_t

enum ft8xx_memory_map_t

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Main parts of FT810 memory map.

Enumerator
RAM_G
RAM_DL
REG_
RAM_CMD

◆ ft8xx_register_address_t

enum ft8xx_register_address_t

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

FT810 register addresses.

Enumerator
REG_TRIM
REG_ID
REG_FRAMES
REG_CLOCK
REG_FREQUENCY
REG_RENDERMODE
REG_SNAPY
REG_SNAPSHOT
REG_CPURESET
REG_TAP_CRC
REG_TAP_MASK
REG_HCYCLE
REG_HOFFSET
REG_HSIZE
REG_HSYNC0
REG_HSYNC1
REG_VCYCLE
REG_VOFFSET
REG_VSIZE
REG_VSYNC0
REG_VSYNC1
REG_DLSWAP
REG_ROTATE
REG_OUTBITS
REG_DITHER
REG_SWIZZLE
REG_CSPREAD
REG_PCLK_POL
REG_PCLK
REG_TAG_X
REG_TAG_Y
REG_TAG
REG_VOL_PB
REG_VOL_SOUND
REG_SOUND
REG_PLAY
REG_GPIO_DIR
REG_GPIO
REG_GPIOX_DIR
REG_GPIOX
REG_INT_FLAGS
REG_INT_EN
REG_INT_MASK
REG_PLAYBACK_START
REG_PLAYBACK_LENGTH
REG_PLAYBACK_READPTR
REG_PLAYBACK_FREQ
REG_PLAYBACK_FORMAT
REG_PLAYBACK_LOOP
REG_PLAYBACK_PLAY
REG_PWM_HZ
REG_PWM_DUTY
REG_CMD_READ
REG_CMD_WRITE
REG_CMD_DL
REG_TOUCH_MODE
REG_TOUCH_ADC_MODE
REG_TOUCH_CHARGE
REG_TOUCH_SETTLE
REG_TOUCH_OVERSAMPLE
REG_TOUCH_RZTHRESH
REG_TOUCH_RAW_XY
REG_TOUCH_RZ
REG_TOUCH_SCREEN_XY
REG_TOUCH_TAG_XY
REG_TOUCH_TAG
REG_TOUCH_TRANSFORM_A
REG_TOUCH_TRANSFORM_B
REG_TOUCH_TRANSFORM_C
REG_TOUCH_TRANSFORM_D
REG_TOUCH_TRANSFORM_E
REG_TOUCH_TRANSFORM_F
REG_TOUCH_CONFIG
REG_SPI_WIDTH
REG_TOUCH_DIRECT_XY
REG_TOUCH_DIRECT_Z1Z2
REG_CMDB_SPACE
REG_CMDB_WRITE
REG_TRACKER
REG_TRACKER1
REG_TRACKER2
REG_TRACKER3
REG_TRACKER4
REG_MEDIAFIFO_READ
REG_MEDIAFIFO_WRITE

Function Documentation

◆ cmd()

static void cmd ( uint32_t command )

inlinestatic

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Execute a display list command by co-processor engine.

Parameters

command Display list command to execute

◆ cmd_calibrate()

static void cmd_calibrate ( uint32_t * result )

inlinestatic

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Execute the touch screen calibration routine.

The calibration procedure collects three touches from the touch screen, then computes and loads an appropriate matrix into REG_TOUCH_TRANSFORM_A-F. To use it, create a display list and then use CMD_CALIBRATE. The co-processor engine overlays the touch targets on the current display list, gathers the calibration input and updates REG_TOUCH_TRANSFORM_A-F.

Parameters

result Calibration result, written with 0 on failure of calibration

◆ cmd_dlstart()

static void cmd_dlstart ( void )

inlinestatic

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Start a new display list.

◆ cmd_number()

static void cmd_number	(	int16_t	x,
		int16_t	y,
		int16_t	font,
		uint16_t	options,
		int32_t	n
	)

inlinestatic

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Draw a decimal number.

By default (x, y) is the top-left pixel of the text. OPT_CENTERX centers the text horizontally, OPT_CENTERY centers it vertically. OPT_CENTER centers the text in both directions. OPT_RIGHTX right-justifies the text, so that the x is the rightmost pixel. By default the number is displayed with no leading zeroes, but if a width 1-9 is specified in the options, then the number is padded if necessary with leading zeroes so that it has the given width. If OPT_SIGNED is given, the number is treated as signed, and prefixed by a minus sign if negative.

Parameters

x	x-coordinate of text base, in pixels
y	y-coordinate of text base, in pixels
font	Font to use for text, 0-31. 16-31 are ROM fonts
options	Options to apply
n	The number to display.

◆ cmd_swap()

static void cmd_swap ( void )

inlinestatic

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Swap the current display list.

◆ cmd_text()

static void cmd_text	(	int16_t	x,
		int16_t	y,
		int16_t	font,
		uint16_t	options,
		const char *	s
	)

inlinestatic

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Draw text.

By default (x,y) is the top-left pixel of the text and the value of options is zero. OPT_CENTERX centers the text horizontally, OPT_CENTERY centers it vertically. OPT_CENTER centers the text in both directions. OPT_RIGHTX right-justifies the text, so that the x is the rightmost pixel.

Parameters

x	x-coordinate of text base, in pixels
y	y-coordinate of text base, in pixels
font	Font to use for text, 0-31. 16-31 are ROM fonts
options	Options to apply
s	Character string to display, terminated with a null character

◆ rd16()

static uint16_t rd16 ( uint32_t address )

inlinestatic

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Read 2 bytes (16 bits) from FT8xx memory.

Parameters

address Memory address to read from

Returns: Value read from memory

◆ rd32()

static uint32_t rd32 ( uint32_t address )

inlinestatic

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Read 4 bytes (32 bits) from FT8xx memory.

Parameters

address Memory address to read from

Returns: Value read from memory

◆ rd8()

static uint8_t rd8 ( uint32_t address )

inlinestatic

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Read 1 byte (8 bits) from FT8xx memory.

Parameters

address Memory address to read from

Returns: Value read from memory

◆ wr16()

static void wr16	(	uint32_t	address,
		uint16_t	data
	)

inlinestatic

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Write 2 bytes (16 bits) to FT8xx memory.

Parameters

address	Memory address to write to
data	Value to write

◆ wr32()

static void wr32	(	uint32_t	address,
		uint32_t	data
	)

inlinestatic

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Write 4 bytes (32 bits) to FT8xx memory.

Parameters

address	Memory address to write to
data	Value to write

◆ wr8()

static void wr8	(	uint32_t	address,
		uint8_t	data
	)

inlinestatic

#include <include/zephyr/drivers/misc/ft8xx/ft8xx_reference_api.h>

Write 1 byte (8 bits) to FT8xx memory.

Parameters

address	Memory address to write to
data	Byte to write

Macros

Enumerations

Functions

Detailed Description

Macro Definition Documentation

◆ BEGIN

◆ BITMAPS

◆ CLEAR

◆ CLEAR_COLOR_RGB

◆ COLOR_RGB

◆ DISPLAY

◆ EDGE_STRIP_A

◆ EDGE_STRIP_B

◆ EDGE_STRIP_L

◆ EDGE_STRIP_R

◆ END

◆ LINE_STRIP

◆ LINE_WIDTH

◆ LINES

◆ OPT_3D

◆ OPT_CENTER

◆ OPT_CENTERX

◆ OPT_CENTERY

◆ OPT_FLAT

◆ OPT_MONO

◆ OPT_NOBACK

◆ OPT_NODL

◆ OPT_NOHANDS

◆ OPT_NOHM

◆ OPT_NOPOINTER

◆ OPT_NOSECS

◆ OPT_NOTICKS

◆ OPT_RGB565

◆ OPT_RIGHTX

◆ OPT_SIGNED

◆ POINTS

◆ RECTS

◆ TAG

◆ VERTEX2F

◆ VERTEX2II

Enumeration Type Documentation

◆ ft8xx_memory_map_t

◆ ft8xx_register_address_t

Function Documentation

◆ cmd()

◆ cmd_calibrate()

◆ cmd_dlstart()

◆ cmd_number()

◆ cmd_swap()

◆ cmd_text()

◆ rd16()

◆ rd32()

◆ rd8()

◆ wr16()

◆ wr32()

◆ wr8()