MBOX Interface

MBOX Interface. More...

Data Structures
struct	mbox_msg
	Message struct (to hold data and its size). More...
struct	mbox_dt_spec
	MBOX specification from DT. More...

Macros
#define	MBOX_DT_SPEC_GET(node_id, name)
	Structure initializer for struct mbox_dt_spec from devicetree.
#define	MBOX_DT_SPEC_INST_GET(inst, name)    MBOX_DT_SPEC_GET(DT_DRV_INST(inst), name)
	Instance version of MBOX_DT_CHANNEL_GET()

Typedefs
typedef uint32_t	mbox_channel_id_t
	Type for MBOX channel identifiers.

Functions
static bool	mbox_is_ready_dt (const struct mbox_dt_spec *spec)
	Validate if MBOX device instance from a struct mbox_dt_spec is ready.
int	mbox_send (const struct device *dev, mbox_channel_id_t channel_id, const struct mbox_msg *msg)
	Try to send a message over the MBOX device.
static int	mbox_send_dt (const struct mbox_dt_spec *spec, const struct mbox_msg *msg)
	Try to send a message over the MBOX device from a struct mbox_dt_spec.
static int	mbox_register_callback (const struct device *dev, mbox_channel_id_t channel_id, mbox_callback_t cb, void *user_data)
	Register a callback function on a channel for incoming messages.
static int	mbox_register_callback_dt (const struct mbox_dt_spec *spec, mbox_callback_t cb, void *user_data)
	Register a callback function on a channel for incoming messages from a struct mbox_dt_spec.
int	mbox_mtu_get (const struct device *dev)
	Return the maximum number of bytes possible in an outbound message.
static int	mbox_mtu_get_dt (const struct mbox_dt_spec *spec)
	Return the maximum number of bytes possible in an outbound message from struct mbox_dt_spec.
int	mbox_set_enabled (const struct device *dev, mbox_channel_id_t channel_id, bool enabled)
	Enable (disable) interrupts and callbacks for inbound channels.
static int	mbox_set_enabled_dt (const struct mbox_dt_spec *spec, bool enabled)
	Enable (disable) interrupts and callbacks for inbound channels from a struct mbox_dt_spec.
uint32_t	mbox_max_channels_get (const struct device *dev)
	Return the maximum number of channels.
static int	mbox_max_channels_get_dt (const struct mbox_dt_spec *spec)
	Return the maximum number of channels from a struct mbox_dt_spec.

Detailed Description

MBOX Interface.

Since

1.0

Version

0.1.0

                     CPU #1        |
+----------+                       |        +----------+
|          +---TX9----+   +--------+--RX8---+          |
|  dev A   |          |   |        |        |  CPU #2  |
|          <---RX8--+ |   | +------+--TX9--->          |
+----------+        | |   | |      |        +----------+
                 +--+-v---v-+--+   |
                 |             |   |
                 |   MBOX dev  |   |
                 |             |   |
                 +--+-^---^--+-+   |
+----------+        | |   |  |     |        +----------+
|          <---RX2--+ |   |  +-----+--TX3--->          |
|  dev B   |          |   |        |        |  CPU #3  |
|          +---TX3----+   +--------+--RX2---+          |
+----------+                       |        +----------+
                                   |

An MBOX device is a peripheral capable of passing signals (and data depending on the peripheral) between CPUs and clusters in the system. Each MBOX instance is providing one or more channels, each one targeting one other CPU cluster (multiple channels can target the same cluster).

For example in the plot the device 'dev A' is using the TX channel 9 to signal (or send data to) the CPU #2 and it's expecting data or signals on the RX channel 8. Thus it can send the message through the channel 9, and it can register a callback on the channel 8 of the MBOX device.

This API supports two modes: signalling mode and data transfer mode.

In signalling mode:

• mbox_mtu_get() must return 0
• mbox_send() must have (msg == NULL)
• the callback must be called with (data == NULL)

In data transfer mode:

• mbox_mtu_get() must return a (value != 0)
• mbox_send() must have (msg != NULL)
• the callback must be called with (data != NULL)
• The msg content must be the same between sender and receiver

Macro Definition Documentation

MBOX_DT_SPEC_GET

#define MBOX_DT_SPEC_GET	(		node_id,
			name
	)

#include <include/zephyr/drivers/mbox.h>

Value:

        {                                                                      \
                .dev = DEVICE_DT_GET(DT_MBOX_CTLR_BY_NAME(node_id, name)),     \
                .channel_id = DT_MBOX_CHANNEL_BY_NAME(node_id, name),          \
        }

Structure initializer for struct mbox_dt_spec from devicetree.

This helper macro expands to a static initializer for a struct mbox_dt_spec by reading the relevant device controller and channel number from the devicetree.

Example devicetree fragment:

n: node {
        mboxes = <&mbox1 8>,
                 <&mbox1 9>;
        mbox-names = "tx", "rx";
};

Example usage:

const struct mbox_dt_spec spec = MBOX_DT_SPEC_GET(DT_NODELABEL(n), tx);

Parameters

node_id	Devicetree node identifier for the MBOX device
name	lowercase-and-underscores name of the mboxes element

Returns

static initializer for a struct mbox_dt_spec

MBOX_DT_SPEC_INST_GET

#define MBOX_DT_SPEC_INST_GET	(		inst,
			name
	)		MBOX_DT_SPEC_GET(DT_DRV_INST(inst), name)

#include <include/zephyr/drivers/mbox.h>

Instance version of MBOX_DT_CHANNEL_GET()

Parameters

inst	DT_DRV_COMPAT instance number
name	lowercase-and-underscores name of the mboxes element

Returns

static initializer for a struct mbox_dt_spec

Typedef Documentation

mbox_channel_id_t

typedef uint32_t mbox_channel_id_t

#include <include/zephyr/drivers/mbox.h>

Type for MBOX channel identifiers.

Function Documentation

mbox_is_ready_dt()

static bool mbox_is_ready_dt ( const struct mbox_dt_spec *  spec )

inlinestatic

#include <include/zephyr/drivers/mbox.h>

Validate if MBOX device instance from a struct mbox_dt_spec is ready.

Parameters

spec	MBOX specification from devicetree

Returns

See return values for mbox_send()

mbox_max_channels_get()

uint32_t mbox_max_channels_get

(

const struct device *

dev

)

#include <include/zephyr/drivers/mbox.h>

Return the maximum number of channels.

Return the maximum number of channels supported by the hardware.

Parameters

dev	MBOX device instance.

Returns

>0 Maximum possible number of supported channels on success

-errno Negative errno on error.

mbox_max_channels_get_dt()

static int mbox_max_channels_get_dt ( const struct mbox_dt_spec *  spec )

inlinestatic

#include <include/zephyr/drivers/mbox.h>

Return the maximum number of channels from a struct mbox_dt_spec.

Parameters

spec	MBOX specification from devicetree

Returns

See return values for mbox_max_channels_get()

mbox_mtu_get()

int mbox_mtu_get

(

const struct device *

dev

)

#include <include/zephyr/drivers/mbox.h>

Return the maximum number of bytes possible in an outbound message.

Returns the actual number of bytes that it is possible to send through an outgoing channel.

This number can be 0 when the driver only supports signalling or when on the receiving side the content and size of the message must be retrieved in an indirect way (i.e. probing some other peripheral, reading memory regions, etc...).

If this function returns 0, the msg parameter in mbox_send() is expected to be NULL.

Parameters

dev	MBOX device instance.

Return values

>0	Maximum possible size of a message in bytes
0	Indicates signalling
-errno	Negative errno on error.

mbox_mtu_get_dt()

static int mbox_mtu_get_dt ( const struct mbox_dt_spec *  spec )

inlinestatic

#include <include/zephyr/drivers/mbox.h>

Return the maximum number of bytes possible in an outbound message from struct mbox_dt_spec.

Parameters

spec	MBOX specification from devicetree

Returns

See return values for mbox_register_callback()

mbox_register_callback()

static int mbox_register_callback ( const struct device *  dev, mbox_channel_id_t  channel_id, mbox_callback_t  cb, void *  user_data  )

inlinestatic

#include <include/zephyr/drivers/mbox.h>

Register a callback function on a channel for incoming messages.

This function doesn't assume anything concerning the status of the interrupts. Use mbox_set_enabled() to enable or to disable the interrupts if needed.

Parameters

dev	MBOX device instance
channel_id	MBOX channel identifier
cb	Callback function to execute on incoming message interrupts.
user_data	Application-specific data pointer which will be passed to the callback function when executed.

Return values

0	On success.
-errno	Negative errno on error.

mbox_register_callback_dt()

static int mbox_register_callback_dt ( const struct mbox_dt_spec *  spec, mbox_callback_t  cb, void *  user_data  )

inlinestatic

#include <include/zephyr/drivers/mbox.h>

Register a callback function on a channel for incoming messages from a struct mbox_dt_spec.

Parameters

spec	MBOX specification from devicetree
cb	Callback function to execute on incoming message interrupts.
user_data	Application-specific data pointer which will be passed to the callback function when executed.

Returns

See return values for mbox_register_callback()

mbox_send()

int mbox_send	(	const struct device *	dev,
		mbox_channel_id_t	channel_id,
		const struct mbox_msg *	msg
	)

#include <include/zephyr/drivers/mbox.h>

Try to send a message over the MBOX device.

Send a message over an struct mbox_channel. The msg parameter must be NULL when the driver is used for signalling.

If the msg parameter is not NULL, this data is expected to be delivered on the receiving side using the data parameter of the receiving callback.

Parameters

dev	MBOX device instance
channel_id	MBOX channel identifier
msg	Message

Return values

0	On success.
-EBUSY	If the remote hasn't yet read the last data sent.
-EMSGSIZE	If the supplied data size is unsupported by the driver.
-EINVAL	If there was a bad parameter, such as: too-large channel descriptor or the device isn't an outbound MBOX channel.

mbox_send_dt()

static int mbox_send_dt ( const struct mbox_dt_spec *  spec, const struct mbox_msg *  msg  )

inlinestatic

#include <include/zephyr/drivers/mbox.h>

Try to send a message over the MBOX device from a struct mbox_dt_spec.

Parameters

spec	MBOX specification from devicetree
msg	Message

Returns

See return values for mbox_send()

mbox_set_enabled()

int mbox_set_enabled	(	const struct device *	dev,
		mbox_channel_id_t	channel_id,
		bool	enabled
	)

#include <include/zephyr/drivers/mbox.h>

Enable (disable) interrupts and callbacks for inbound channels.

Enable interrupt for the channel when the parameter 'enable' is set to true. Disable it otherwise.

Immediately after calling this function with 'enable' set to true, the channel is considered enabled and ready to receive signal and messages (even already pending), so the user must take care of installing a proper callback (if needed) using mbox_register_callback() on the channel before enabling it. For this reason it is recommended that all the channels are disabled at probe time.

Enabling a channel for which there is no installed callback is considered undefined behavior (in general the driver must take care of gracefully handling spurious interrupts with no installed callback).

Parameters

dev	MBOX device instance
channel_id	MBOX channel identifier
enabled	Enable (true) or disable (false) the channel.

Return values

0	On success.
-EINVAL	If it isn't an inbound channel.
-EALREADY	If channel is already enabled.

mbox_set_enabled_dt()

static int mbox_set_enabled_dt ( const struct mbox_dt_spec *  spec, bool  enabled  )

inlinestatic

#include <include/zephyr/drivers/mbox.h>

Enable (disable) interrupts and callbacks for inbound channels from a struct mbox_dt_spec.

Parameters

spec	MBOX specification from devicetree
enabled	Enable (true) or disable (false) the channel.

Returns

See return values for mbox_set_enabled()