Functions
int	mfd_bd8lb600fs_set_outputs (const struct device *dev, uint32_t values)
	set outputs

int	mfd_bd8lb600fs_get_output_diagnostics (const struct device dev, uint32_t old, uint32_t *ocp_or_tsd)
	get output diagnostics

Detailed Description

Function Documentation

◆ mfd_bd8lb600fs_get_output_diagnostics()

int mfd_bd8lb600fs_get_output_diagnostics	(	const struct device *	dev,
		uint32_t *	old,
		uint32_t *	ocp_or_tsd
	)

#include <include/zephyr/drivers/mfd/bd8lb600fs.h>

get output diagnostics

Fetch the current diagnostics from all instances, as multiple instances might be daisy chained together. Each bit in old and ocp_or_tsd corresponds to one output. A set bit means that the function is active, therefore either there is an open load, an over current or a too high temperature.

OLD - open load OCP - over current protection TSD - thermal shutdown

Parameters

[in]	dev	instance of BD8LB600FS MFD
[out]	old	open load values
[out]	ocp_or_tsd	over current protection or thermal shutdown values

Return values

0	if successful

◆ mfd_bd8lb600fs_set_outputs()

int mfd_bd8lb600fs_set_outputs	(	const struct device *	dev,
		uint32_t	values
	)