Dynamic Pin Control

Macros
#define	PINCTRL_DT_STATE_PINS_DEFINE(node_id, prop)
	Helper macro to define the pins of a pin control state from Devicetree.
#define	PINCTRL_DT_STATE_INIT(prop, state)
	Utility macro to initialize a pin control state.

Functions
int	pinctrl_update_states (struct pinctrl_dev_config *config, const struct pinctrl_state *states, uint8_t state_cnt)
	Update states with a new set.

Detailed Description

Macro Definition Documentation

PINCTRL_DT_STATE_INIT

#define PINCTRL_DT_STATE_INIT	(		prop,
			state
	)

#include <include/zephyr/drivers/pinctrl.h>

Value:

        {                                                                      \
                .id = state,                                                   \
                .pins = prop ## _pins,                                         \
                .pin_cnt = ARRAY_SIZE(prop ## _pins)                           \
        }

Utility macro to initialize a pin control state.

This macro should be used in conjunction with PINCTRL_DT_STATE_PINS_DEFINE when using dynamic pin control to define an alternative state configuration stored in Devicetree.

Example:

// board.dts
 
/{
     zephyr,user {
             // uart0_alt_default node contains alternative pin config
             uart0_alt_default = <&uart0_alt_default>;
     };
};

// application
 
PINCTRL_DT_STATE_PINS_DEFINE(DT_PATH(zephyr_user), uart0_alt_default);
 
static const struct pinctrl_state uart0_alt[] = {
    PINCTRL_DT_STATE_INIT(uart0_alt_default, PINCTRL_STATE_DEFAULT)
};

Parameters

prop	Property name in Devicetree containing state configuration.
state	State represented by prop (see PINCTRL_STATES).

See also

PINCTRL_DT_STATE_PINS_DEFINE

PINCTRL_DT_STATE_PINS_DEFINE

#define PINCTRL_DT_STATE_PINS_DEFINE	(		node_id,
			prop
	)

#include <include/zephyr/drivers/pinctrl.h>

Value:

        static const pinctrl_soc_pin_t prop ## _pins[] =                       \
        Z_PINCTRL_STATE_PINS_INIT(node_id, prop);                              \

Helper macro to define the pins of a pin control state from Devicetree.

The name of the defined state pins variable is the same used by prop. This macro is expected to be used in conjunction with PINCTRL_DT_STATE_INIT.

Parameters

node_id	Node identifier containing prop.
prop	Property within node_id containing state configuration.

See also

PINCTRL_DT_STATE_INIT

Function Documentation

pinctrl_update_states()

int pinctrl_update_states	(	struct pinctrl_dev_config *	config,
		const struct pinctrl_state *	states,
		uint8_t	state_cnt
	)

#include <include/zephyr/drivers/pinctrl.h>

Update states with a new set.

Note

In order to guarantee device drivers correct operation the same states have to be provided. For example, if default and sleep are in the current list of states, it is expected that the new array of states also contains both.

Parameters

config	Pin control configuration.
states	New states to be set.
state_cnt	Number of new states to be set.

Return values

-EINVAL	If the new configuration does not contain the same states as the current active configuration.
-ENOSYS	If the functionality is not available.
0	On success.