S2RAM APIs

Typedefs
typedef int(*	pm_s2ram_system_off_fn_t) (void)
	System off function.

Functions
int	arch_pm_s2ram_suspend (pm_s2ram_system_off_fn_t system_off)
	Save CPU context on suspend.
void	pm_s2ram_mark_set (void)
	Mark that core is entering suspend-to-RAM state.
bool	pm_s2ram_mark_check_and_clear (void)
	Check suspend-to-RAM marking and clear its state.

Detailed Description

Typedef Documentation

pm_s2ram_system_off_fn_t

typedef int(* pm_s2ram_system_off_fn_t) (void)

#include <include/zephyr/arch/common/pm_s2ram.h>

System off function.

This function is passed as argument and called by arch_pm_s2ram_suspend to power the system off after the CPU context has been saved.

This function never returns if the system is powered off. If the operation cannot be performed a proper value is returned and the code must take care of restoring the system in a fully operational state before returning.

Return values

none	The system is powered off.
-EBUSY	The system is busy and cannot be powered off at this time.
-errno	Other error codes.

Function Documentation

arch_pm_s2ram_suspend()

int arch_pm_s2ram_suspend

(

pm_s2ram_system_off_fn_t

system_off

)

#include <include/zephyr/arch/common/pm_s2ram.h>

Save CPU context on suspend.

This function is used on suspend-to-RAM (S2RAM) to save the CPU context in (retained) RAM before powering the system off using the provided function. This function is usually called from the PM subsystem / hooks.

The CPU context is usually the minimum set of CPU registers which content must be restored on resume to let the platform resume its execution from the point it left at the time of suspension.

Parameters

system_off

Function to power off the system.

Return values

0	The CPU context was successfully saved and restored.
-EBUSY	The system is busy and cannot be suspended at this time.
-errno	Negative errno code in case of failure.

pm_s2ram_mark_check_and_clear()

bool pm_s2ram_mark_check_and_clear

(

void

)

#include <include/zephyr/arch/common/pm_s2ram.h>

Check suspend-to-RAM marking and clear its state.

Function is used to determine if resuming after suspend-to-RAM shall be performed or standard boot code shall be executed.

Default implementation is checking a magic word in RAM. CONFIG_PM_S2RAM_CUSTOM_MARKING allows custom implementation.

Return values

true	if marking is found which indicates resuming after suspend-to-RAM.
false	if marking is not found which indicates standard boot.

pm_s2ram_mark_set()

void pm_s2ram_mark_set

(

void

)

#include <include/zephyr/arch/common/pm_s2ram.h>

Mark that core is entering suspend-to-RAM state.

Function is called when system state is stored to RAM, just before going to system off.

Default implementation is setting a magic word in RAM. CONFIG_PM_S2RAM_CUSTOM_MARKING allows custom implementation.