WIFI scanning configuration

Macros
#define	URC_MODE   1
	To avoid too much data coming again and again on UART, the Host has the possibility to set a filter mode to display only one time the BSSID found during the full time of WIFI scanning.
#define	HOPPING_TIME   1024
	Hopping time is the scan duration in ms before swapping to next channel.
#define	ANT_SEL   1
	Selects the suitable ST87 input for antenna (GNSS or NB-IOT).

Detailed Description

Macro Definition Documentation

ANT_SEL

#define ANT_SEL   1

#include </__w/bridle/bridle/workspace/zephyr/include/zephyr/drivers/modem/st87mxx_app_services.h>

Selects the suitable ST87 input for antenna (GNSS or NB-IOT).

Possible values:
0: GNSS ant. input (default mode)
1: NB-IOT ant. input

HOPPING_TIME

#define HOPPING_TIME   1024

#include </__w/bridle/bridle/workspace/zephyr/include/zephyr/drivers/modem/st87mxx_app_services.h>

Hopping time is the scan duration in ms before swapping to next channel.

URC_MODE

#define URC_MODE   1

#include </__w/bridle/bridle/workspace/zephyr/include/zephyr/drivers/modem/st87mxx_app_services.h>

To avoid too much data coming again and again on UART, the Host has the possibility to set a filter mode to display only one time the BSSID found during the full time of WIFI scanning.

Possible values:
0: Only the new SSID after one loop (Default mode)
1: In infinite loop URC