Watchdog Interface

Watchdog Interface. More...

Data Structures
struct	wdt_window
	Watchdog timeout window. More...
struct	wdt_timeout_cfg
	Watchdog timeout configuration. More...

Typedefs
typedef void(*	wdt_callback_t) (const struct device *dev, int channel_id)
	Watchdog callback.

Functions
int	wdt_setup (const struct device *dev, uint8_t options)
	Set up watchdog instance.
int	wdt_disable (const struct device *dev)
	Disable watchdog instance.
static int	wdt_install_timeout (const struct device *dev, const struct wdt_timeout_cfg *cfg)
	Install a new timeout.
int	wdt_feed (const struct device *dev, int channel_id)
	Feed specified watchdog timeout.

Watchdog options
#define	WDT_OPT_PAUSE_IN_SLEEP   BIT(0)
	Pause watchdog timer when CPU is in sleep state.
#define	WDT_OPT_PAUSE_HALTED_BY_DBG   BIT(1)
	Pause watchdog timer when CPU is halted by the debugger.

Watchdog behavior flags
#define	WDT_FLAG_RESET_NONE   (0 << WDT_FLAG_RESET_SHIFT)
	Reset: none.
#define	WDT_FLAG_RESET_CPU_CORE   (1 << WDT_FLAG_RESET_SHIFT)
	Reset: CPU core.
#define	WDT_FLAG_RESET_SOC   (2 << WDT_FLAG_RESET_SHIFT)
	Reset: SoC.

Detailed Description

Watchdog Interface.

Since

1.0

Version

1.0.0

Macro Definition Documentation

WDT_FLAG_RESET_CPU_CORE

#define WDT_FLAG_RESET_CPU_CORE   (1 << WDT_FLAG_RESET_SHIFT)

#include <include/zephyr/drivers/watchdog.h>

Reset: CPU core.

WDT_FLAG_RESET_NONE

#define WDT_FLAG_RESET_NONE   (0 << WDT_FLAG_RESET_SHIFT)

#include <include/zephyr/drivers/watchdog.h>

Reset: none.

WDT_FLAG_RESET_SOC

#define WDT_FLAG_RESET_SOC   (2 << WDT_FLAG_RESET_SHIFT)

#include <include/zephyr/drivers/watchdog.h>

Reset: SoC.

WDT_OPT_PAUSE_HALTED_BY_DBG

#define WDT_OPT_PAUSE_HALTED_BY_DBG   BIT(1)

#include <include/zephyr/drivers/watchdog.h>

Pause watchdog timer when CPU is halted by the debugger.

WDT_OPT_PAUSE_IN_SLEEP

#define WDT_OPT_PAUSE_IN_SLEEP   BIT(0)

#include <include/zephyr/drivers/watchdog.h>

Pause watchdog timer when CPU is in sleep state.

Typedef Documentation

wdt_callback_t

typedef void(* wdt_callback_t) (const struct device *dev, int channel_id)

#include <include/zephyr/drivers/watchdog.h>

Watchdog callback.

Parameters

dev	Watchdog device instance.
channel_id	Channel identifier.

Function Documentation

wdt_disable()

int wdt_disable

(

const struct device *

dev

)

#include <include/zephyr/drivers/watchdog.h>

Disable watchdog instance.

This function disables the watchdog instance and automatically uninstalls all timeouts. To set up a new watchdog, install timeouts and call wdt_setup() again. Not all watchdogs can be restarted after they are disabled.

Parameters

dev	Watchdog device instance.

Return values

0	If successful.
-EFAULT	If watchdog instance is not enabled.
-EPERM	If watchdog can not be disabled directly by application code.
-errno	In case of any other failure.

wdt_feed()

int wdt_feed	(	const struct device *	dev,
		int	channel_id
	)

#include <include/zephyr/drivers/watchdog.h>

Feed specified watchdog timeout.

Parameters

dev	Watchdog device instance.
channel_id	Channel index.

Return values

0	If successful.
-EAGAIN	If completing the feed operation would stall the caller, for example due to an in-progress watchdog operation such as a previous wdt_feed() call.
-EINVAL	If there is no installed timeout for supplied channel.
-errno	In case of any other failure.

wdt_install_timeout()

static int wdt_install_timeout ( const struct device *  dev, const struct wdt_timeout_cfg *  cfg  )

inlinestatic

#include <include/zephyr/drivers/watchdog.h>

Install a new timeout.

Note

This function must be used before wdt_setup(). Changes applied here have no effects until wdt_setup() is called.

Parameters

	dev	Watchdog device instance.
[in]	cfg	Timeout configuration.

Return values

channel_id	If successful, a non-negative value indicating the index of the channel to which the timeout was assigned. This value is supposed to be used as the parameter in calls to wdt_feed().
-EBUSY	If timeout can not be installed while watchdog has already been setup.
-ENOMEM	If no more timeouts can be installed.
-ENOTSUP	If any of the set flags is not supported.
-EINVAL	If any of the window timeout value is out of possible range. This value is also returned if watchdog supports only one timeout value for all timeouts and the supplied timeout window differs from windows for alarms installed so far.
-errno	In case of any other failure.

wdt_setup()

int wdt_setup	(	const struct device *	dev,
		uint8_t	options
	)

#include <include/zephyr/drivers/watchdog.h>

Set up watchdog instance.

This function is used for configuring global watchdog settings that affect all timeouts. It should be called after installing timeouts. After successful return, all installed timeouts are valid and must be serviced periodically by calling wdt_feed().

Parameters

dev	Watchdog device instance.
options	Configuration options (see WDT_OPT).

Return values

0	If successful.
-ENOTSUP	If any of the set options is not supported.
-EBUSY	If watchdog instance has been already setup.
-errno	In case of any other failure.