Zephyr Project API 3.7.0
A Scalable Open Source RTOS
Loading...
Searching...
No Matches
linker-tool-mwdt.h
Go to the documentation of this file.
1/*
2 * Copyright (c) 2020, Synopsys, Inc.
3 *
4 * SPDX-License-Identifier: Apache-2.0
5 */
6
15#ifndef ZEPHYR_INCLUDE_LINKER_LINKER_TOOL_MWDT_H_
16#define ZEPHYR_INCLUDE_LINKER_LINKER_TOOL_MWDT_H_
17
18/*
19 * mwdt linker doesn't have the following directives
20 */
21#define ASSERT(x, y)
22#define SUBALIGN(x) ALIGN(x)
23
24/*
25 * The GROUP_START() and GROUP_END() macros are used to define a group
26 * of sections located in one memory area, such as RAM, ROM, etc.
27 * The <where> parameter is the name of the memory area.
28 */
29#define GROUP_START(where)
30#define GROUP_END(where)
31
32/*
33 * The GROUP_LINK_IN() macro is located at the end of the section
34 * description and tells the linker that this section is located in
35 * the memory area specified by <where> argument.
36 */
37#define GROUP_LINK_IN(where) > where
38
45#define GROUP_ROM_LINK_IN(vregion, lregion) > lregion
46
47/*
48 * As GROUP_LINK_IN(), but takes a second argument indicating the
49 * memory region (e.g. "ROM") for the load address. Used for
50 * initialized data sections that on XIP platforms must be copied at
51 * startup.
52 *
53 * And, because output directives in GNU ld are "sticky", this must
54 * also be used on the first section *after* such an initialized data
55 * section, specifying the same memory region (e.g. "RAM") for both
56 * vregion and lregion.
57 */
58#ifdef CONFIG_XIP
59#define GROUP_DATA_LINK_IN(vregion, lregion) > vregion AT > lregion
60#else
61#define GROUP_DATA_LINK_IN(vregion, lregion) > vregion
62#endif
63
68#ifdef CONFIG_XIP
69#define GROUP_NOLOAD_LINK_IN(vregion, lregion) > vregion AT > vregion
70#else
71#define GROUP_NOLOAD_LINK_IN(vregion, lregion) > vregion
72#endif
73
74/*
75 * The SECTION_PROLOGUE() macro is used to define the beginning of a section.
76 * The <name> parameter is the name of the section, and the <option> parameter
77 * is to include any special options such as (NOLOAD). Page alignment has its
78 * own parameter since it needs abstraction across the different toolchains.
79 * If not required, the <options> and <align> parameters should be left blank.
80 */
81#define SECTION_PROLOGUE(name, options, align) name options : align
82
83/*
84 * As for SECTION_PROLOGUE(), except that this one must (!) be used
85 * for data sections which on XIP platforms will have differing
86 * virtual and load addresses (i.e. they'll be copied into RAM at
87 * program startup). Such a section must (!) also use
88 * GROUP_LINK_IN_LMA to specify the correct output load address.
89 */
90#ifdef CONFIG_XIP
91#define SECTION_DATA_PROLOGUE(name, options, align) \
92 name options ALIGN(8) : align
93#else
94#define SECTION_DATA_PROLOGUE(name, options, align) name options : align
95
96#endif
97
98#define SORT_BY_NAME(x) SORT(x)
99
100#endif /* ZEPHYR_INCLUDE_LINKER_LINKER_TOOL_MWDT_H_ */