Utilities

This page contains reference documentation for <sys/util.h>, which provides miscellaneous utility functions and macros.

group sys-util

Since

2.4

Version

0.1.0

Defines

POINTER_TO_UINT(x)

Cast x, a pointer, to an unsigned integer.

UINT_TO_POINTER(x)

Cast x, an unsigned integer, to a void*.

POINTER_TO_INT(x)

Cast x, a pointer, to a signed integer.

INT_TO_POINTER(x)

Cast x, a signed integer, to a void*.

BITS_PER_LONG

Number of bits in a long int.

BITS_PER_LONG_LONG

Number of bits in a long long int.

GENMASK(h, l)

Create a contiguous bitmask starting at bit position l and ending at position h.

GENMASK64(h, l)

Create a contiguous 64-bit bitmask starting at bit position l and ending at position h.

LSB_GET(value)

Extract the Least Significant Bit from value.

FIELD_GET(mask, value)

Extract a bitfield element from value corresponding to the field mask mask.

FIELD_PREP(mask, value)

Prepare a bitfield element using value with mask representing its field position and width.

The result should be combined with other fields using a logical OR.

ZERO_OR_COMPILE_ERROR(cond)

0 if cond is true-ish; causes a compile error otherwise.

IS_ARRAY(array)

Zero if array has an array type, a compile error otherwise.

This macro is available only from C, not C++.

ARRAY_SIZE(array)

Number of elements in the given array.

In C++, due to language limitations, this will accept as array any type that implements operator[]. The results may not be particularly meaningful in this case.

In C, passing a pointer as array causes a compile error.

IS_ARRAY_ELEMENT(array, ptr)

Whether ptr is an element of array.

This macro can be seen as a slightly stricter version of PART_OF_ARRAY in that it also ensures that ptr is aligned to an array-element boundary of array.

In C, passing a pointer as array causes a compile error.

Parameters:
  • array – the array in question

  • ptr – the pointer to check

Returns:

1 if ptr is part of array, 0 otherwise

ARRAY_INDEX(array, ptr)

Index of ptr within array.

With CONFIG_ASSERT=y, this macro will trigger a runtime assertion when ptr does not fall into the range of array or when ptr is not aligned to an array-element boundary of array.

In C, passing a pointer as array causes a compile error.

Parameters:
  • array – the array in question

  • ptr – pointer to an element of array

Returns:

the array index of ptr within array, on success

PART_OF_ARRAY(array, ptr)

Check if a pointer ptr lies within array.

In C but not C++, this causes a compile error if array is not an array (e.g. if ptr and array are mixed up).

Parameters:
  • array – an array

  • ptr – a pointer

Returns:

1 if ptr is part of array, 0 otherwise

ARRAY_INDEX_FLOOR(array, ptr)

Array-index of ptr within array, rounded down.

This macro behaves much like ARRAY_INDEX with the notable difference that it accepts any ptr in the range of array rather than exclusively a ptr aligned to an array-element boundary of array.

With CONFIG_ASSERT=y, this macro will trigger a runtime assertion when ptr does not fall into the range of array.

In C, passing a pointer as array causes a compile error.

Parameters:
  • array – the array in question

  • ptr – pointer to an element of array

Returns:

the array index of ptr within array, on success

ARRAY_FOR_EACH(array, idx)

Iterate over members of an array using an index variable.

Parameters:
  • array – the array in question

  • idx – name of array index variable

ARRAY_FOR_EACH_PTR(array, ptr)

Iterate over members of an array using a pointer.

Parameters:
  • array – the array in question

  • ptr – pointer to an element of array

SAME_TYPE(a, b)

Validate if two entities have a compatible type.

Parameters:
  • a – the first entity to be compared

  • b – the second entity to be compared

Returns:

1 if the two elements are compatible, 0 if they are not

CONTAINER_OF_VALIDATE(ptr, type, field)

Validate CONTAINER_OF parameters, only applies to C mode.

CONTAINER_OF(ptr, type, field)

Get a pointer to a structure containing the element.

Example:

 struct foo {
    int bar;
 };

 struct foo my_foo;
 int *ptr = &my_foo.bar;

 struct foo *container = CONTAINER_OF(ptr, struct foo, bar);
Above, container points at my_foo.

Parameters:
  • ptr – pointer to a structure element

  • type – name of the type that ptr is an element of

  • field – the name of the field within the struct ptr points to

Returns:

a pointer to the structure that contains ptr

SIZEOF_FIELD(type, member)

Report the size of a struct field in bytes.

Parameters:
  • type – The structure containing the field of interest.

  • member – The field to return the size of.

Returns:

The field size.

CONCAT(...)

Concatenate input arguments.

Concatenate provided tokens into a combined token during the preprocessor pass. This can be used to, for ex., build an identifier out of multiple parts, where one of those parts may be, for ex, a number, another macro, or a macro argument.

Parameters:
  • ... – Tokens to concatencate

Returns:

Concatenated token.

IS_ALIGNED(ptr, align)

Check if ptr is aligned to align alignment.

ROUND_UP(x, align)

Value of x rounded up to the next multiple of align.

ROUND_DOWN(x, align)

Value of x rounded down to the previous multiple of align.

WB_UP(x)

Value of x rounded up to the next word boundary.

WB_DN(x)

Value of x rounded down to the previous word boundary.

DIV_ROUND_UP(n, d)

Divide and round up.

Example:

DIV_ROUND_UP(1, 2); // 1
DIV_ROUND_UP(3, 2); // 2

Parameters:
  • n – Numerator.

  • d – Denominator.

Returns:

The result of n / d, rounded up.

DIV_ROUND_CLOSEST(n, d)

Divide and round to the nearest integer.

Example:

DIV_ROUND_CLOSEST(5, 2); // 3
DIV_ROUND_CLOSEST(5, -2); // -3
DIV_ROUND_CLOSEST(5, 3); // 2

Parameters:
  • n – Numerator.

  • d – Denominator.

Returns:

The result of n / d, rounded to the nearest integer.

ceiling_fraction(numerator, divider)

Ceiling function applied to numerator / divider as a fraction.

Deprecated:

Use DIV_ROUND_UP() instead.

MAX(a, b)

Obtain the maximum of two values.

Note

Arguments are evaluated twice. Use Z_MAX for a GCC-only, single evaluation version

Parameters:
  • a – First value.

  • b – Second value.

Returns:

Maximum value of a and b.

MIN(a, b)

Obtain the minimum of two values.

Note

Arguments are evaluated twice. Use Z_MIN for a GCC-only, single evaluation version

Parameters:
  • a – First value.

  • b – Second value.

Returns:

Minimum value of a and b.

CLAMP(val, low, high)

Clamp a value to a given range.

Note

Arguments are evaluated multiple times. Use Z_CLAMP for a GCC-only, single evaluation version.

Parameters:
  • val – Value to be clamped.

  • low – Lowest allowed value (inclusive).

  • high – Highest allowed value (inclusive).

Returns:

Clamped value.

IN_RANGE(val, min, max)

Checks if a value is within range.

Note

val is evaluated twice.

Parameters:
  • val – Value to be checked.

  • min – Lower bound (inclusive).

  • max – Upper bound (inclusive).

Return values:
  • true – If value is within range

  • false – If the value is not within range

LOG2(x)

Compute log2(x)

Note

This macro expands its argument multiple times (to permit use in constant expressions), which must not have side effects.

Parameters:
  • x – An unsigned integral value to compute logarithm of (positive only)

Returns:

log2(x) when 1 <= x <= max(x), -1 when x < 1

LOG2CEIL(x)

Compute ceil(log2(x))

Note

This macro expands its argument multiple times (to permit use in constant expressions), which must not have side effects.

Parameters:
  • x – An unsigned integral value

Returns:

ceil(log2(x)) when 1 <= x <= max(type(x)), 0 when x < 1

NHPOT(x)

Compute next highest power of two.

Equivalent to 2^ceil(log2(x))

Note

This macro expands its argument multiple times (to permit use in constant expressions), which must not have side effects.

Parameters:
  • x – An unsigned integral value

Returns:

2^ceil(log2(x)) or 0 if 2^ceil(log2(x)) would saturate 64-bits

KB(x)

Number of bytes in x kibibytes.

MB(x)

Number of bytes in x mebibytes.

GB(x)

Number of bytes in x gibibytes.

KHZ(x)

Number of Hz in x kHz.

MHZ(x)

Number of Hz in x MHz.

WAIT_FOR(expr, timeout, delay_stmt)

Wait for an expression to return true with a timeout.

Spin on an expression with a timeout and optional delay between iterations

Commonly needed when waiting on hardware to complete an asynchronous request to read/write/initialize/reset, but useful for any expression.

Parameters:
  • expr – Truth expression upon which to poll, e.g.: XYZREG & XYZREG_EN

  • timeout – Timeout to wait for in microseconds, e.g.: 1000 (1ms)

  • delay_stmt – Delay statement to perform each poll iteration e.g.: NULL, k_yield(), k_msleep(1) or k_busy_wait(1)

Return values:

expr – As a boolean return, if false then it has timed out.

BIT(n)

Unsigned integer with bit position n set (signed in assembly language).

BIT64(_n)

64-bit unsigned integer with bit position _n set.

WRITE_BIT(var, bit, set)

Set or clear a bit depending on a boolean value.

The argument var is a variable whose value is written to as a side effect.

Parameters:
  • var – Variable to be altered

  • bit – Bit number

  • set – if 0, clears bit in var; any other value sets bit

BIT_MASK(n)

Bit mask with bits 0 through n-1 (inclusive) set, or 0 if n is 0.

BIT64_MASK(n)

64-bit bit mask with bits 0 through n-1 (inclusive) set, or 0 if n is 0.

IS_POWER_OF_TWO(x)

Check if a x is a power of two.

IS_SHIFTED_BIT_MASK(m, s)

Check if bits are set continuously from the specified bit.

The macro is not dependent on the bit-width.

Parameters:
  • m – Check whether the bits are set continuously or not.

  • s – Specify the lowest bit for that is continuously set bits.

IS_BIT_MASK(m)

Check if bits are set continuously from the LSB.

Parameters:
  • m – Check whether the bits are set continuously from LSB.

IS_ENABLED(config_macro)

Check for macro definition in compiler-visible expressions.

This trick was pioneered in Linux as the config_enabled() macro. It has the effect of taking a macro value that may be defined to “1” or may not be defined at all and turning it into a literal expression that can be handled by the C compiler instead of just the preprocessor. It is often used with a CONFIG_FOO macro which may be defined to 1 via Kconfig, or left undefined.

That is, it works similarly to #if defined(CONFIG_FOO) except that its expansion is a C expression. Thus, much #ifdef usage can be replaced with equivalents like:

if (IS_ENABLED(CONFIG_FOO)) {
        do_something_with_foo
}
This is cleaner since the compiler can generate errors and warnings for do_something_with_foo even when CONFIG_FOO is undefined.

Note: Use of IS_ENABLED in a #if statement is discouraged as it doesn’t provide any benefit vs plain #if defined()

Parameters:
  • config_macro – Macro to check

Returns:

1 if config_macro is defined to 1, 0 otherwise (including if config_macro is not defined)

COND_CODE_1(_flag, _if_1_code, _else_code)

Insert code depending on whether _flag expands to 1 or not.

This relies on similar tricks as IS_ENABLED(), but as the result of _flag expansion, results in either _if_1_code or _else_code is expanded.

To prevent the preprocessor from treating commas as argument separators, the _if_1_code and _else_code expressions must be inside brackets/parentheses: (). These are stripped away during macro expansion.

Example:

COND_CODE_1(CONFIG_FLAG, (uint32_t x;), (there_is_no_flag();))
If CONFIG_FLAG is defined to 1, this expands to:
uint32_t x;
It expands to there_is_no_flag(); otherwise.

This could be used as an alternative to:

#if defined(CONFIG_FLAG) && (CONFIG_FLAG == 1)
#define MAYBE_DECLARE(x) uint32_t x
#else
#define MAYBE_DECLARE(x) there_is_no_flag()
#endif

MAYBE_DECLARE(x);
However, the advantage of COND_CODE_1() is that code is resolved in place where it is used, while the #if method defines MAYBE_DECLARE on two lines and requires it to be invoked again on a separate line. This makes COND_CODE_1() more concise and also sometimes more useful when used within another macro’s expansion.

Note

_flag can be the result of preprocessor expansion, e.g. an expression involving NUM_VA_ARGS_LESS_1(...). However, _if_1_code is only expanded if _flag expands to the integer literal 1. Integer expressions that evaluate to 1, e.g. after doing some arithmetic, will not work.

Parameters:
  • _flag – evaluated flag

  • _if_1_code – result if _flag expands to 1; must be in parentheses

  • _else_code – result otherwise; must be in parentheses

COND_CODE_0(_flag, _if_0_code, _else_code)

Like COND_CODE_1() except tests if _flag is 0.

This is like COND_CODE_1(), except that it tests whether _flag expands to the integer literal 0. It expands to _if_0_code if so, and _else_code otherwise; both of these must be enclosed in parentheses.

See also

COND_CODE_1()

Parameters:
  • _flag – evaluated flag

  • _if_0_code – result if _flag expands to 0; must be in parentheses

  • _else_code – result otherwise; must be in parentheses

IF_ENABLED(_flag, _code)

Insert code if _flag is defined and equals 1.

Like COND_CODE_1(), this expands to _code if _flag is defined to 1; it expands to nothing otherwise.

Example:

IF_ENABLED(CONFIG_FLAG, (uint32_t foo;))
If CONFIG_FLAG is defined to 1, this expands to:
uint32_t foo;
and to nothing otherwise.

It can be considered as a more compact alternative to:

#if defined(CONFIG_FLAG) && (CONFIG_FLAG == 1)
uint32_t foo;
#endif

Parameters:
  • _flag – evaluated flag

  • _code – result if _flag expands to 1; must be in parentheses

IF_DISABLED(_flag, _code)

Insert code if _flag is not defined as 1.

This expands to nothing if _flag is defined and equal to 1; it expands to _code otherwise.

Example:

IF_DISABLED(CONFIG_FLAG, (uint32_t foo;))
If CONFIG_FLAG isn’t defined or different than 1, this expands to:
uint32_t foo;
and to nothing otherwise.

IF_DISABLED does the opposite of IF_ENABLED.

Parameters:
  • _flag – evaluated flag

  • _code – result if _flag does not expand to 1; must be in parentheses

IS_EMPTY(...)

Check if a macro has a replacement expression.

If a is a macro defined to a nonempty value, this will return true, otherwise it will return false. It only works with defined macros, so an additional #ifdef test may be needed in some cases.

This macro may be used with COND_CODE_1() and COND_CODE_0() while processing __VA_ARGS__ to avoid processing empty arguments.

Example:

 #define EMPTY
 #define NON_EMPTY  1
 #undef  UNDEFINED
 IS_EMPTY(EMPTY)
 IS_EMPTY(NON_EMPTY)
 IS_EMPTY(UNDEFINED)
 #if defined(EMPTY) && IS_EMPTY(EMPTY) == true
 some_conditional_code
 #endif
In above examples, the invocations of IS_EMPTY(…) return true, false, and true; some_conditional_code is included.

Parameters:
  • ... – macro to check for emptiness (may be __VA_ARGS__)

IS_EQ(a, b)

Like a == b, but does evaluation and short-circuiting at C preprocessor time.

This however only works for integer literal from 0 to 4095.

LIST_DROP_EMPTY(...)

Remove empty arguments from list.

During macro expansion, __VA_ARGS__ and other preprocessor generated lists may contain empty elements, e.g.:

 #define LIST ,a,b,,d,
Using EMPTY to show each empty element, LIST contains:
 EMPTY, a, b, EMPTY, d
When processing such lists, e.g. using FOR_EACH(), all empty elements will be processed, and may require filtering out. To make that process easier, it is enough to invoke LIST_DROP_EMPTY which will remove all empty elements.

Example:

 LIST_DROP_EMPTY(LIST)
expands to:
 a, b, d

Parameters:
  • ... – list to be processed

EMPTY

Macro with an empty expansion.

This trivial definition is provided for readability when a macro should expand to an empty result, which e.g. is sometimes needed to silence checkpatch.

Example:

 #define LIST_ITEM(n) , item##n
The above would cause checkpatch to complain, but:
 #define LIST_ITEM(n) EMPTY, item##n
would not.

IDENTITY(V)

Macro that expands to its argument.

This is useful in macros like FOR_EACH() when there is no transformation required on the list elements.

Parameters:
  • V – any value

GET_ARG_N(N, ...)

Get nth argument from argument list.

Parameters:
  • N – Argument index to fetch. Counter from 1.

  • ... – Variable list of arguments from which one argument is returned.

Returns:

Nth argument.

GET_ARGS_LESS_N(N, ...)

Strips n first arguments from the argument list.

Parameters:
  • N – Number of arguments to discard.

  • ... – Variable list of arguments.

Returns:

argument list without N first arguments.

UTIL_OR(a, b)

Like a || b, but does evaluation and short-circuiting at C preprocessor time.

This is not the same as the binary || operator; in particular, a should expand to an integer literal 0 or 1. However, b can be any value.

This can be useful when b is an expression that would cause a build error when a is 1.

UTIL_AND(a, b)

Like a && b, but does evaluation and short-circuiting at C preprocessor time.

This is not the same as the binary &&, however; in particular, a should expand to an integer literal 0 or 1. However, b can be any value.

This can be useful when b is an expression that would cause a build error when a is 0.

UTIL_INC(x)

UTIL_INC(x) for an integer literal x from 0 to 4095 expands to an integer literal whose value is x+1.

See also

UTIL_DEC(x)

UTIL_DEC(x)

UTIL_DEC(x) for an integer literal x from 0 to 4095 expands to an integer literal whose value is x-1.

See also

UTIL_INC(x)

UTIL_X2(y)

UTIL_X2(y) for an integer literal y from 0 to 4095 expands to an integer literal whose value is 2y.

LISTIFY(LEN, F, sep, ...)

Generates a sequence of code with configurable separator.

Example:

#define FOO(i, _) MY_PWM ## i
{ LISTIFY(PWM_COUNT, FOO, (,)) }
The above two lines expand to:

{ MY_PWM0 , MY_PWM1 }

Note

Calling LISTIFY with undefined arguments has undefined behavior.

Parameters:
  • LEN – The length of the sequence. Must be an integer literal less than 4095.

  • F – A macro function that accepts at least two arguments: F(i, ...). F is called repeatedly in the expansion. Its first argument i is the index in the sequence, and the variable list of arguments passed to LISTIFY are passed through to F.

  • sep – Separator (e.g. comma or semicolon). Must be in parentheses; this is required to enable providing a comma as separator.

FOR_EACH(F, sep, ...)

Call a macro F on each provided argument with a given separator between each call.

Example:

#define F(x) int a##x
FOR_EACH(F, (;), 4, 5, 6);
This expands to:
int a4;
int a5;
int a6;

Parameters:
  • F – Macro to invoke

  • sep – Separator (e.g. comma or semicolon). Must be in parentheses; this is required to enable providing a comma as separator.

  • ... – Variable argument list. The macro F is invoked as F(element) for each element in the list.

FOR_EACH_NONEMPTY_TERM(F, term, ...)

Like FOR_EACH(), but with a terminator instead of a separator, and drops empty elements from the argument list.

The sep argument to FOR_EACH(F, (sep), a, b) is a separator which is placed between calls to F, like this:

FOR_EACH(F, (sep), a, b) // F(a) sep F(b)
                         //               ^^^ no sep here!
By contrast, the term argument to FOR_EACH_NONEMPTY_TERM(F, (term),a, b) is added after each time F appears in the expansion:
FOR_EACH_NONEMPTY_TERM(F, (term), a, b) // F(a) term F(b) term
                                        //                ^^^^
Further, any empty elements are dropped:
FOR_EACH_NONEMPTY_TERM(F, (term), a, EMPTY, b) // F(a) term F(b) term
This is more convenient in some cases, because FOR_EACH_NONEMPTY_TERM() expands to nothing when given an empty argument list, and it’s often cumbersome to write a macro F that does the right thing even when given an empty argument.

One example is when __VA_ARGS__ may or may not be empty, and the results are embedded in a larger initializer:

#define SQUARE(x) ((x)*(x))

int my_array[] = {
        FOR_EACH_NONEMPTY_TERM(SQUARE, (,), FOO(...))
        FOR_EACH_NONEMPTY_TERM(SQUARE, (,), BAR(...))
        FOR_EACH_NONEMPTY_TERM(SQUARE, (,), BAZ(...))
};
This is more convenient than:

  1. figuring out whether the FOO, BAR, and BAZ expansions are empty and adding a comma manually (or not) between FOR_EACH() calls

  2. rewriting SQUARE so it reacts appropriately when “x” is empty (which would be necessary if e.g. FOO expands to nothing)

Parameters:
  • F – Macro to invoke on each nonempty element of the variable arguments

  • term – Terminator (e.g. comma or semicolon) placed after each invocation of F. Must be in parentheses; this is required to enable providing a comma as separator.

  • ... – Variable argument list. The macro F is invoked as F(element) for each nonempty element in the list.

FOR_EACH_IDX(F, sep, ...)

Call macro F on each provided argument, with the argument’s index as an additional parameter.

This is like FOR_EACH(), except F should be a macro which takes two arguments: F(index, variable_arg).

Example:

#define F(idx, x) int a##idx = x
FOR_EACH_IDX(F, (;), 4, 5, 6);
This expands to:
int a0 = 4;
int a1 = 5;
int a2 = 6;

Parameters:
  • F – Macro to invoke

  • sep – Separator (e.g. comma or semicolon). Must be in parentheses; this is required to enable providing a comma as separator.

  • ... – Variable argument list. The macro F is invoked as F(index, element) for each element in the list.

FOR_EACH_FIXED_ARG(F, sep, fixed_arg, ...)

Call macro F on each provided argument, with an additional fixed argument as a parameter.

This is like FOR_EACH(), except F should be a macro which takes two arguments: F(variable_arg, fixed_arg).

Example:

static void func(int val, void *dev);
FOR_EACH_FIXED_ARG(func, (;), dev, 4, 5, 6);
This expands to:
func(4, dev);
func(5, dev);
func(6, dev);

Parameters:
  • F – Macro to invoke

  • sep – Separator (e.g. comma or semicolon). Must be in parentheses; this is required to enable providing a comma as separator.

  • fixed_arg – Fixed argument passed to F as the second macro parameter.

  • ... – Variable argument list. The macro F is invoked as F(element, fixed_arg) for each element in the list.

FOR_EACH_IDX_FIXED_ARG(F, sep, fixed_arg, ...)

Calls macro F for each variable argument with an index and fixed argument.

This is like the combination of FOR_EACH_IDX() with FOR_EACH_FIXED_ARG().

Example:

#define F(idx, x, fixed_arg) int fixed_arg##idx = x
FOR_EACH_IDX_FIXED_ARG(F, (;), a, 4, 5, 6);
This expands to:
int a0 = 4;
int a1 = 5;
int a2 = 6;

Parameters:
  • F – Macro to invoke

  • sep – Separator (e.g. comma or semicolon). Must be in parentheses; This is required to enable providing a comma as separator.

  • fixed_arg – Fixed argument passed to F as the third macro parameter.

  • ... – Variable list of arguments. The macro F is invoked as F(index, element, fixed_arg) for each element in the list.

REVERSE_ARGS(...)

Reverse arguments order.

Parameters:
  • ... – Variable argument list.

NUM_VA_ARGS_LESS_1(...)

Number of arguments in the variable arguments list minus one.

Note

Supports up to 64 arguments.

Parameters:
  • ... – List of arguments

Returns:

Number of variadic arguments in the argument list, minus one

NUM_VA_ARGS(...)

Number of arguments in the variable arguments list.

Note

Supports up to 63 arguments.

Parameters:
  • ... – List of arguments

Returns:

Number of variadic arguments in the argument list

MACRO_MAP_CAT(...)

Mapping macro that pastes results together.

This is similar to FOR_EACH() in that it invokes a macro repeatedly on each element of __VA_ARGS__. However, unlike FOR_EACH(), MACRO_MAP_CAT() pastes the results together into a single token.

For example, with this macro FOO:

#define FOO(x) item_##x##_
MACRO_MAP_CAT(FOO, a, b, c), expands to the token:
item_a_item_b_item_c_

Parameters:
  • ... – Macro to expand on each argument, followed by its arguments. (The macro should take exactly one argument.)

Returns:

The results of expanding the macro on each argument, all pasted together

MACRO_MAP_CAT_N(N, ...)

Mapping macro that pastes a fixed number of results together.

Similar to MACRO_MAP_CAT(), but expects a fixed number of arguments. If more arguments are given than are expected, the rest are ignored.

Parameters:
  • N – Number of arguments to map

  • ... – Macro to expand on each argument, followed by its arguments. (The macro should take exactly one argument.)

Returns:

The results of expanding the macro on each argument, all pasted together

Functions

static inline bool is_power_of_two(unsigned int x)

Is x a power of two?

Parameters:
  • x – value to check

Returns:

true if x is a power of two, false otherwise

ALWAYS_INLINE static bool is_null_no_warn(void *p)

Is p equal to NULL?

Some macros may need to check their arguments against NULL to support multiple use-cases, but NULL checks can generate warnings if such a macro is used in contexts where that particular argument can never be NULL.

The warnings can be triggered if: a) all macros are expanded (e.g. when using CONFIG_COMPILER_SAVE_TEMPS=y) or b) tracking of macro expansions are turned off (-ftrack-macro-expansion=0)

The warnings can be circumvented by using this inline function for doing the NULL check within the macro. The compiler is still able to optimize the NULL check out at a later stage.

Parameters:
  • p – Pointer to check

Returns:

true if p is equal to NULL, false otherwise

static inline int64_t arithmetic_shift_right(int64_t value, uint8_t shift)

Arithmetic shift right.

Parameters:
  • value – value to shift

  • shift – number of bits to shift

Returns:

value shifted right by shift; opened bit positions are filled with the sign bit

static inline void bytecpy(void *dst, const void *src, size_t size)

byte by byte memcpy.

Copy size bytes of src into dest. This is guaranteed to be done byte by byte.

Parameters:
  • dst – Pointer to the destination memory.

  • src – Pointer to the source of the data.

  • size – The number of bytes to copy.

static inline void byteswp(void *a, void *b, size_t size)

byte by byte swap.

Swap size bytes between memory regions a and b. This is guaranteed to be done byte by byte.

Parameters:
  • a – Pointer to the the first memory region.

  • b – Pointer to the the second memory region.

  • size – The number of bytes to swap.

int char2hex(char c, uint8_t *x)

Convert a single character into a hexadecimal nibble.

Parameters:
  • c – The character to convert

  • x – The address of storage for the converted number.

Returns:

Zero on success or (negative) error code otherwise.

int hex2char(uint8_t x, char *c)

Convert a single hexadecimal nibble into a character.

Parameters:
  • c – The number to convert

  • x – The address of storage for the converted character.

Returns:

Zero on success or (negative) error code otherwise.

size_t bin2hex(const uint8_t *buf, size_t buflen, char *hex, size_t hexlen)

Convert a binary array into string representation.

Parameters:
  • buf – The binary array to convert

  • buflen – The length of the binary array to convert

  • hex – Address of where to store the string representation.

  • hexlen – Size of the storage area for string representation.

Returns:

The length of the converted string, or 0 if an error occurred.

size_t hex2bin(const char *hex, size_t hexlen, uint8_t *buf, size_t buflen)

Convert a hexadecimal string into a binary array.

Parameters:
  • hex – The hexadecimal string to convert

  • hexlen – The length of the hexadecimal string to convert.

  • buf – Address of where to store the binary data

  • buflen – Size of the storage area for binary data

Returns:

The length of the binary array, or 0 if an error occurred.

static inline uint8_t bcd2bin(uint8_t bcd)

Convert a binary coded decimal (BCD 8421) value to binary.

Parameters:
  • bcd – BCD 8421 value to convert.

Returns:

Binary representation of input value.

static inline uint8_t bin2bcd(uint8_t bin)

Convert a binary value to binary coded decimal (BCD 8421).

Parameters:
  • bin – Binary value to convert.

Returns:

BCD 8421 representation of input value.

uint8_t u8_to_dec(char *buf, uint8_t buflen, uint8_t value)

Convert a uint8_t into a decimal string representation.

Convert a uint8_t value into its ASCII decimal string representation. The string is terminated if there is enough space in buf.

Parameters:
  • buf – Address of where to store the string representation.

  • buflen – Size of the storage area for string representation.

  • value – The value to convert to decimal string

Returns:

The length of the converted string (excluding terminator if any), or 0 if an error occurred.

static inline int32_t sign_extend(uint32_t value, uint8_t index)

Sign extend an 8, 16 or 32 bit value using the index bit as sign bit.

Parameters:
  • value – The value to sign expand.

  • index – 0 based bit index to sign bit (0 to 31)

static inline int64_t sign_extend_64(uint64_t value, uint8_t index)

Sign extend a 64 bit value using the index bit as sign bit.

Parameters:
  • value – The value to sign expand.

  • index – 0 based bit index to sign bit (0 to 63)

char *utf8_trunc(char *utf8_str)

Properly truncate a NULL-terminated UTF-8 string.

Take a NULL-terminated UTF-8 string and ensure that if the string has been truncated (by setting the NULL terminator) earlier by other means, that the string ends with a properly formatted UTF-8 character (1-4 bytes).

Parameters:
  • utf8_str – NULL-terminated string

Returns:

Pointer to the utf8_str

char *utf8_lcpy(char *dst, const char *src, size_t n)

Copies a UTF-8 encoded string from src to dst.

The resulting dst will always be NULL terminated if n is larger than 0, and the dst string will always be properly UTF-8 truncated.

Parameters:
  • dst – The destination of the UTF-8 string.

  • src – The source string

  • n – The size of the dst buffer. Maximum number of characters copied is n - 1. If 0 nothing will be done, and the dst will not be NULL terminated.

Returns:

Pointer to the dst

static inline void mem_xor_n(uint8_t *dst, const uint8_t *src1, const uint8_t *src2, size_t len)

XOR n bytes.

Parameters:
  • dst – Destination of where to store result. Shall be len bytes.

  • src1 – First source. Shall be len bytes.

  • src2 – Second source. Shall be len bytes.

  • len – Number of bytes to XOR.

static inline void mem_xor_32(uint8_t dst[4], const uint8_t src1[4], const uint8_t src2[4])

XOR 32 bits.

Parameters:
  • dst – Destination of where to store result. Shall be 32 bits.

  • src1 – First source. Shall be 32 bits.

  • src2 – Second source. Shall be 32 bits.

static inline void mem_xor_128(uint8_t dst[16], const uint8_t src1[16], const uint8_t src2[16])

XOR 128 bits.

Parameters:
  • dst – Destination of where to store result. Shall be 128 bits.

  • src1 – First source. Shall be 128 bits.

  • src2 – Second source. Shall be 128 bits.