NUS Console Snippet (nus-console)

west build -S nus-console [...]

Overview

This snippet redirects serial console output to a UART over NUS (Bluetooth LE) instance. The Bluetooth Serial device used shall be configured using Devicetree.

Requirements

Hardware support for:

• CONFIG_BT

• CONFIG_BT_PERIPHERAL

• CONFIG_BT_ZEPHYR_NUS

• CONFIG_SERIAL

• CONFIG_CONSOLE

• CONFIG_UART_CONSOLE

A devicetree node with node label bt_nus_console_uart that points to an enabled device node with nus-uart support. This should look roughly like this in your devicetree:

bt_nus_console_uart: bt_nus_console_uart {
   compatible = "zephyr,nus-uart";
     /* ... */
};