CONFIG_FLASH_BASE_ADDRESS¶
Flash Base Address
Type: hex
Help¶
This option specifies the base address of the flash on the board. It is
normally set by the board's defconfig file and the user should generally
avoid modifying it via the menu configuration.
Direct dependencies¶
(!XIP && BOARD_96B_MEERKAT96) || (!XIP && BOARD_COLIBRI_IMX7D_M4) || BOARD_MERCURY_XU || (!XIP && BOARD_MIMX8MM_EVK) || (!XIP && BOARD_PICO_PI_M4) || (!XIP && BOARD_WARP7_M4) || BOARD_HIFIVE1_REVB || (CODE_SEMC && SOC_SERIES_IMX_RT) || (CODE_ITCM && SOC_SERIES_IMX_RT) || (CODE_SRAM0 && SOC_SERIES_IMX_RT) || (CODE_FLEXSPI && SOC_SERIES_IMX_RT) || (CODE_FLEXSPI2 && SOC_SERIES_IMX_RT) || SOC_SERIES_IMX_RT6XX || (!XIP && SOC_CC3220SF && SOC_SERIES_CC32XX) || (!XIP && SOC_CC3235SF && SOC_SERIES_CC32XX) || SOC_XILINX_ZYNQMP || (SOC_FVP_BASE_REVC_2XAEMV8A && SOC_SERIES_FVP_AEMV8A) || (SOC_FVP_AEMV8R_AARCH64 && SOC_SERIES_FVP_AEMV8R) || (SOC_LS1046A && SOC_SERIES_LS1046A) || SOC_QEMU_CORTEX_A53 || (FLASH && SOC_OPENISA_RV32M1_RISCV32) || (CODE_SEMC && SOC_SERIES_IMX_RT) || (CODE_ITCM && SOC_SERIES_IMX_RT) || (CODE_SRAM0 && SOC_SERIES_IMX_RT) || (CODE_FLEXSPI && SOC_SERIES_IMX_RT) || (CODE_FLEXSPI2 && SOC_SERIES_IMX_RT) || SOC_SERIES_IMX_RT6XX || (!XIP && SOC_CC3220SF && SOC_SERIES_CC32XX) || (!XIP && SOC_CC3235SF && SOC_SERIES_CC32XX) || SOC_XILINX_ZYNQMP || (SOC_FVP_BASE_REVC_2XAEMV8A && SOC_SERIES_FVP_AEMV8A) || (SOC_FVP_AEMV8R_AARCH64 && SOC_SERIES_FVP_AEMV8R) || (SOC_LS1046A && SOC_SERIES_LS1046A) || SOC_QEMU_CORTEX_A53 || (FLASH && SOC_OPENISA_RV32M1_RISCV32) || ARC || ARM || ARM64 || NIOS2 || X86
(Includes any dependencies from ifs and menus.)
Defaults¶
0
0
0x08000000
0
0
0
0x0
0x0
0x0 if
SOC_SERIES_IMX_RT11XX0x0 if
SOC_SERIES_IMX_RT10XX0x0
0x0 if
SOC_SERIES_IMX_RT11XX0x0 if
SOC_SERIES_IMX_RT10XX0x0 if
SOC_SERIES_IMX_RT11XX0x0 if
SOC_SERIES_IMX_RT10XX0x0
0
0
0x0
0x0
0x0
0
0x0
0x0
0x0
0x0 if
SOC_SERIES_IMX_RT11XX0x0 if
SOC_SERIES_IMX_RT10XX0x0
0x0 if
SOC_SERIES_IMX_RT11XX0x0 if
SOC_SERIES_IMX_RT10XX0x0 if
SOC_SERIES_IMX_RT11XX0x0 if
SOC_SERIES_IMX_RT10XX0x0
0
0
0x0
0x0
0x0
0
0x0
0x0
Kconfig definitions¶
At <Zephyr Boards>/arm/96b_meerkat96/Kconfig.defconfig:14
Included via Kconfig:8 → Kconfig.zephyr:22
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0
depends on !XIP && BOARD_96B_MEERKAT96
At <Zephyr Boards>/arm/colibri_imx7d_m4/Kconfig.defconfig:14
Included via Kconfig:8 → Kconfig.zephyr:22
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0
depends on !XIP && BOARD_COLIBRI_IMX7D_M4
At <Zephyr Boards>/arm/mercury_xu/Kconfig.defconfig:13
Included via Kconfig:8 → Kconfig.zephyr:22
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x08000000
depends on BOARD_MERCURY_XU
At <Zephyr Boards>/arm/mimx8mm_evk/Kconfig.defconfig:14
Included via Kconfig:8 → Kconfig.zephyr:22
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0
depends on !XIP && BOARD_MIMX8MM_EVK
At <Zephyr Boards>/arm/pico_pi_m4/Kconfig.defconfig:14
Included via Kconfig:8 → Kconfig.zephyr:22
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0
depends on !XIP && BOARD_PICO_PI_M4
At <Zephyr Boards>/arm/warp7_m4/Kconfig.defconfig:22
Included via Kconfig:8 → Kconfig.zephyr:22
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0
depends on !XIP && BOARD_WARP7_M4
At <Zephyr Boards>/riscv/hifive1_revb/Kconfig.defconfig:12
Included via Kconfig:8 → Kconfig.zephyr:22
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on BOARD_HIFIVE1_REVB
At <Zephyr SoC>/arm/nxp_imx/rt/Kconfig.defconfig.series:92
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/nxp_imx/Kconfig.defconfig:8
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on CODE_SEMC && SOC_SERIES_IMX_RT
At <Zephyr SoC>/arm/nxp_imx/rt/Kconfig.defconfig.series:103
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/nxp_imx/Kconfig.defconfig:8
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0 if SOC_SERIES_IMX_RT11XX
default 0x0 if SOC_SERIES_IMX_RT10XX
depends on CODE_ITCM && SOC_SERIES_IMX_RT
At <Zephyr SoC>/arm/nxp_imx/rt/Kconfig.defconfig.series:114
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/nxp_imx/Kconfig.defconfig:8
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on CODE_SRAM0 && SOC_SERIES_IMX_RT
At <Zephyr SoC>/arm/nxp_imx/rt/Kconfig.defconfig.series:126
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/nxp_imx/Kconfig.defconfig:8
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0 if SOC_SERIES_IMX_RT11XX
default 0x0 if SOC_SERIES_IMX_RT10XX
depends on CODE_FLEXSPI && SOC_SERIES_IMX_RT
At <Zephyr SoC>/arm/nxp_imx/rt/Kconfig.defconfig.series:138
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/nxp_imx/Kconfig.defconfig:8
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0 if SOC_SERIES_IMX_RT11XX
default 0x0 if SOC_SERIES_IMX_RT10XX
depends on CODE_FLEXSPI2 && SOC_SERIES_IMX_RT
At <Zephyr SoC>/arm/nxp_imx/rt6xx/Kconfig.defconfig.series:23
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/nxp_imx/Kconfig.defconfig:8
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on SOC_SERIES_IMX_RT6XX
At <Zephyr SoC>/arm/ti_simplelink/cc32xx/Kconfig.defconfig.cc3220sf:36
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/ti_simplelink/Kconfig.defconfig:3 → <Zephyr SoC>/arm/ti_simplelink/cc32xx/Kconfig.defconfig.series:7
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0
depends on !XIP && SOC_CC3220SF && SOC_SERIES_CC32XX
At <Zephyr SoC>/arm/ti_simplelink/cc32xx/Kconfig.defconfig.cc3235sf:37
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/ti_simplelink/Kconfig.defconfig:3 → <Zephyr SoC>/arm/ti_simplelink/cc32xx/Kconfig.defconfig.series:7
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0
depends on !XIP && SOC_CC3235SF && SOC_SERIES_CC32XX
At <Zephyr SoC>/arm/xilinx_zynqmp/Kconfig.defconfig:28
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on SOC_XILINX_ZYNQMP
At <Zephyr SoC>/arm64/arm/fvp_aemv8a/Kconfig.defconfig.series:26
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm64/arm/Kconfig.defconfig:7
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on SOC_FVP_BASE_REVC_2XAEMV8A && SOC_SERIES_FVP_AEMV8A
At <Zephyr SoC>/arm64/arm/fvp_aemv8r/Kconfig.defconfig.series:26
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm64/arm/Kconfig.defconfig:7
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on SOC_FVP_AEMV8R_AARCH64 && SOC_SERIES_FVP_AEMV8R
At <Zephyr SoC>/arm64/nxp_layerscape/ls1046a/Kconfig.defconfig.ls1046a:19
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm64/nxp_layerscape/Kconfig.defconfig:7 → <Zephyr SoC>/arm64/nxp_layerscape/ls1046a/Kconfig.defconfig.series:12
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0
depends on SOC_LS1046A && SOC_SERIES_LS1046A
At <Zephyr SoC>/arm64/qemu_cortex_a53/Kconfig.defconfig:23
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on SOC_QEMU_CORTEX_A53
At <Zephyr SoC>/riscv/openisa_rv32m1/Kconfig.defconfig:156
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on FLASH && SOC_OPENISA_RV32M1_RISCV32
At <Zephyr SoC>/arm/nxp_imx/rt/Kconfig.defconfig.series:92
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/nxp_imx/Kconfig.defconfig:8
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on CODE_SEMC && SOC_SERIES_IMX_RT
At <Zephyr SoC>/arm/nxp_imx/rt/Kconfig.defconfig.series:103
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/nxp_imx/Kconfig.defconfig:8
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0 if SOC_SERIES_IMX_RT11XX
default 0x0 if SOC_SERIES_IMX_RT10XX
depends on CODE_ITCM && SOC_SERIES_IMX_RT
At <Zephyr SoC>/arm/nxp_imx/rt/Kconfig.defconfig.series:114
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/nxp_imx/Kconfig.defconfig:8
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on CODE_SRAM0 && SOC_SERIES_IMX_RT
At <Zephyr SoC>/arm/nxp_imx/rt/Kconfig.defconfig.series:126
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/nxp_imx/Kconfig.defconfig:8
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0 if SOC_SERIES_IMX_RT11XX
default 0x0 if SOC_SERIES_IMX_RT10XX
depends on CODE_FLEXSPI && SOC_SERIES_IMX_RT
At <Zephyr SoC>/arm/nxp_imx/rt/Kconfig.defconfig.series:138
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/nxp_imx/Kconfig.defconfig:8
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0 if SOC_SERIES_IMX_RT11XX
default 0x0 if SOC_SERIES_IMX_RT10XX
depends on CODE_FLEXSPI2 && SOC_SERIES_IMX_RT
At <Zephyr SoC>/arm/nxp_imx/rt6xx/Kconfig.defconfig.series:23
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/nxp_imx/Kconfig.defconfig:8
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on SOC_SERIES_IMX_RT6XX
At <Zephyr SoC>/arm/ti_simplelink/cc32xx/Kconfig.defconfig.cc3220sf:36
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/ti_simplelink/Kconfig.defconfig:3 → <Zephyr SoC>/arm/ti_simplelink/cc32xx/Kconfig.defconfig.series:7
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0
depends on !XIP && SOC_CC3220SF && SOC_SERIES_CC32XX
At <Zephyr SoC>/arm/ti_simplelink/cc32xx/Kconfig.defconfig.cc3235sf:37
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/ti_simplelink/Kconfig.defconfig:3 → <Zephyr SoC>/arm/ti_simplelink/cc32xx/Kconfig.defconfig.series:7
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0
depends on !XIP && SOC_CC3235SF && SOC_SERIES_CC32XX
At <Zephyr SoC>/arm/xilinx_zynqmp/Kconfig.defconfig:28
Included via Kconfig:8 → Kconfig.zephyr:27
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on SOC_XILINX_ZYNQMP
At <Zephyr SoC>/arm64/arm/fvp_aemv8a/Kconfig.defconfig.series:26
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm64/arm/Kconfig.defconfig:7
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on SOC_FVP_BASE_REVC_2XAEMV8A && SOC_SERIES_FVP_AEMV8A
At <Zephyr SoC>/arm64/arm/fvp_aemv8r/Kconfig.defconfig.series:26
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm64/arm/Kconfig.defconfig:7
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on SOC_FVP_AEMV8R_AARCH64 && SOC_SERIES_FVP_AEMV8R
At <Zephyr SoC>/arm64/nxp_layerscape/ls1046a/Kconfig.defconfig.ls1046a:19
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm64/nxp_layerscape/Kconfig.defconfig:7 → <Zephyr SoC>/arm64/nxp_layerscape/ls1046a/Kconfig.defconfig.series:12
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0
depends on SOC_LS1046A && SOC_SERIES_LS1046A
At <Zephyr SoC>/arm64/qemu_cortex_a53/Kconfig.defconfig:23
Included via Kconfig:8 → Kconfig.zephyr:27
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on SOC_QEMU_CORTEX_A53
At <Zephyr SoC>/riscv/openisa_rv32m1/Kconfig.defconfig:156
Included via Kconfig:8 → Kconfig.zephyr:27
Menu path: (Top)
config FLASH_BASE_ADDRESS
hex
default 0x0
depends on FLASH && SOC_OPENISA_RV32M1_RISCV32
At <Zephyr Architecture>/Kconfig:194
Included via Kconfig:8 → Kconfig.zephyr:39
Menu path: (Top) → General Architecture Options
config FLASH_BASE_ADDRESS
hex "Flash Base Address"
default 0x0 if (XIP && (ARM || ARM64)) || !ARM
depends on ARC || ARM || ARM64 || NIOS2 || X86
help
This option specifies the base address of the flash on the board. It is
normally set by the board's defconfig file and the user should generally
avoid modifying it via the menu configuration.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)