Zephyr Boards Configuration Options¶
Kconfig files describe build-time configuration options (called symbols
in Kconfig-speak), how they’re grouped into menus and sub-menus, and
dependencies between them that determine what configurations are valid.
Kconfig files appear throughout the directory tree. For example,
subsys/power/Kconfig defines power-related options.
This documentation is generated automatically from the Kconfig files by
the gen_kconfig_rest.py script. Click on symbols for more
information.
Configuration Options¶
Symbol name |
Prompt |
|---|---|
Level 1 IRQ line for 2ND level aggregator 0 |
|
Level 1 IRQ line for 2ND level aggregator 1 |
|
Level 1 IRQ line for 2ND level aggregator 2 |
|
Level 1 IRQ line for 2ND level aggregator 3 |
|
Offset in _sw_isr_table for level 2 interrupts |
|
Level 2 IRQ line for 3RD level aggregator 0 |
|
Offset in _sw_isr_table for level 3 interrupts |
|
LMP90xxx driver |
|
Enable GPIO support |
|
MCP3204/MCP3208 driver |
|
Local APIC timer IRQ |
|
TSC to local APIC timer frequency divisor (M) |
|
TSC to local APIC timer frequency multiplier (N) |
|
Even newer APIC timer using TSC deadline mode |
|
Audio Codec Drivers |
|
Digital Microphone (Audio) Drivers |
|
Intel digital PDM microphone driver support |
|
TLV320DAC310x DAC support |
|
Enable the battery sense circuit |
|
96Boards AEROCORE2 (STM32F427) |
|
96Boards Argonkey |
|
96Boards Avenger96 Board |
|
96Boards Carbon (STM32F401) |
|
96Boards Carbon (nRF51) |
|
96Boards Meerkat96 board |
|
96Boards Neonkey |
|
96Boards Nitrogen |
|
96Boards STM32 Sensor Mezzanine Board |
|
96boards WisTrio Development Board |
|
ACRN User OS |
|
Actinius Icarus |
|
Actinius Icarus Bee |
|
Actinius Icarus Bee Non-Secure |
|
Actinius Icarus Non-Secure |
|
Actinius Icarus SoM |
|
Actinius Icarus SoM Non-Secure |
|
Adafruit Feather M0 Basic Proto |
|
Adafruit Feather nRF52840 Express |
|
Feather STM32F405 Express Board |
|
Adafruit ItsyBitsy M4 Express |
|
Adafruit Trinket M0 |
|
Andes ADP-XC7K AE350 Platform |
|
Altera MAX10 Board |
|
Arduino Due Board |
|
Arduino Nano 33 BLE board |
|
Sends the console output over the USB port |
|
Initializes the internal I2C sensors on the board |
|
Arduino Nano 33 IOT |
|
Arduino Zero |
|
Digilent Arty A7 ARM DesignStart Cortex-M1 |
|
Digilent Arty A7 ARM DesignStart Cortex-M3 |
|
SAM D20 Xplained Pro |
|
SAM D21 Xplained Pro |
|
SAM E54 Xplained Pro |
|
SAM R21 Xplained Pro |
|
BBC MICRO:BIT |
|
BBC MICRO:BIT_V2 |
|
Broadcom Viper BCM958402M2_A72 |
|
Broadcom Viper BCM958402M2_M7 |
|
BeagleV Starlight JH7100 RISCV64 target |
|
BL5340-DVK (nRF5340) Application MCU |
|
BL5340-DVK (nRF5340) Application MCU non-secure |
|
BL5340-DVK (nRF5340) Network MCU |
|
BL652 DVK |
|
BL653 DVK |
|
BL654 DVK |
|
BL654 Sensor Board |
|
BL654 USB |
|
WeAct Studio Black Pill V3.0+ Board |
|
WeAct Studio Black Pill V2.0+ Board |
|
Black F407VE Development Board |
|
Black F407ZG Pro Development Board |
|
BT510 |
|
BT610 |
|
STMicroelectronics B-L072Z-LRWAN1 Discovery kit |
|
STM32L4S5I IOT Discovery kit |
|
STM32U585I IOT Discovery kit |
|
TI CC1352R1 LaunchXL |
|
TI CC1352R SensorTag |
|
TI CC26x2R1 LaunchXL |
|
TI CC3220SF LAUNCHXL |
|
TI CC3235SF LAUNCHXL |
|
CCS_VDD power rail init priority |
|
Circuit Dojo nRF9160 Feather |
|
Circuit Dojo nRF9160 Feather non-secure |
|
Toradex Colibri iMX7 Dual |
|
nRF52840 based Advanced BLE Cell |
|
PSoC6 BLE Pioneer Kit [M0 CPU0] |
|
PSoC6 BLE Pioneer Kit [M4 CPU1] |
|
PSoC6 WiFi-BT Pioneer Kit M0 |
|
PSoC6 WiFi-BT Pioneer Kit M4 |
|
Decawave DWM1001-DEV |
|
DEGU_EVK |
|
Discovery IoT L475 Development Board |
|
Dragino LSN50 Sensor Node |
|
Dragino NBSN95 Sensor Node |
|
SiLabs EFM32GG-SLWSTK6121A (WGM160P) |
|
SiLabs EFM32GG-STK3701A (Giant Gecko 11) |
|
SiLabs EFM32HG-SLSTK3400A (Happy Gecko) |
|
SiLabs EFM32PG-STK3401A (Pearl Gecko) |
|
SiLabs EFM32PG-STK3402A (Pearl Gecko) |
|
SiLabs EFM32PG-STK3402A (Jade Gecko) |
|
SiLabs EFM32WG-STK3800 (Wonder Gecko) |
|
SiLabs EFR32MG-SLTB004A (Thunderboard Sense 2) |
|
Silicon Labs BRD4104A (Blue Gecko Radio Board) |
|
Silicon Labs BRD4180A (Mighty Gecko Radio Board) |
|
Silicon Labs BRD4250B (Flex Gecko Radio Board) |
|
Silicon Labs BRD4255A (Flex Gecko Radio Board) |
|
Elkhart Lake CRB |
|
Elkhart Lake CRB (with Slim Bootloader) |
|
EM Software Development Platform |
|
ARC EM Starter Kit |
|
2.2 |
|
2.3 |
|
Enable nRF53 Network MCU |
|
Enable DCDC mode |
|
Enable Application MCU DCDC converter |
|
Enable High Voltage DCDC converter |
|
Enable Network MCU DCDC converter |
|
ESP32 Development Board |
|
ESP32C3 Devkit-M Board |
|
ESP32S2 Saola Board |
|
Seagate FireCuda Gaming SSD (FaZe) |
|
NXP FRDM-K22F |
|
Freescale FRDM-K64F |
|
NXP FRDM-K82F |
|
NXP FRDM-KL25Z |
|
NXP FRDM-KW41Z |
|
FVP BaseR AEMv8R simulation board |
|
FVP Base RevC AEMv8A simulation board |
|
Generic LEON3 system |
|
Google Kukui EC |
|
GR716-MINI Development Board |
|
Board has nRF5 bootloader |
|
NXP Hexiwear K64 |
|
Hexiwear KW40Z |
|
HiFive1 target |
|
HiFive1 Rev B target |
|
HiFive Unleashed target |
|
HiFive Unmatched target |
|
Holyiot YJ-16019 |
|
ARC HS Development Kit |
|
Board initialization priority |
|
Intel ADSP CAVS 1.5 |
|
Intel ADSP CAVS 1.8 |
|
Intel ADSP CAVS 2.0 |
|
Intel ADSP CAVS 2.5 |
|
Xtensa on Intel_S1000 |
|
ARC IoT Development Kit |
|
Segger IP-K66F |
|
IT8XXX2 EV-board |
|
Legend board |
|
Board with LiteX/VexRiscV CPU |
|
LoRa E5 Development Board |
|
NXP LPCXPRESSO-11U68 |
|
NXP LPCXPRESSO-54114 M0 |
|
NXP LPCXPRESSO-54114 M4 |
|
NXP LPCXPRESSO-55S16 |
|
NXP LPCXPRESSO-55S28 |
|
NXP LPCXPRESSO-55S69 [CPU0] |
|
NXP LPCXPRESSO-55S69 [CPU1] |
|
Microsemi M2GL025 IGLOO2 dev board with Mi-V CPU |
|
Microchip MEC1501 Modular ASSY 6885 Development board |
|
Microchip MEC15XX EVB ASSY 6853 Development board |
|
Microchip MEC172X EVB ASSY 6906 Development board |
|
Microchip MEC2016 EVB ASSY 6797 Development board |
|
Mercury XU Board |
|
MikroE Clicker 2 for STM32 board |
|
Mikroe MINI-M4 for STM32 Board |
|
NXP i.MX8M Mini EVK |
|
NXP MIMXRT1010-EVK |
|
NXP MIMXRT1015-EVK |
|
NXP MIMXRT1020-EVK |
|
NXP MIMXRT1024-EVK |
|
NXP MIMXRT1050-EVK |
|
NXP MIMXRT1050-EVK-QSPI |
|
NXP MIMXRT1060-EVK |
|
NXP MIMXRT1060-EVK-HYPERFLASH |
|
NXP MIMXRT1064-EVK |
|
NXP MIMXRT1170-EVK CM4 |
|
NXP MIMXRT1170-EVK CM7 |
|
NXP MIMXRT685-EVK |
|
MM MM-FEATHER |
|
MM MM-SWIFTIO |
|
ARM Cortex-M3 SMM on V2M-MPS2 (Application Note AN385) |
|
ARM Cortex-M33 SMM on V2M-MPS2 (AN521) (CPU0) |
|
ARM Cortex-M33 SMM on V2M-MPS2 (AN521) (CPU0 Non-Secure) |
|
ARM Cortex-M33 SMM on V2M-MPS2 (AN521) CPU1 |
|
Arm Cortex-M55 (Corstone-300, SSE-300 w/Ethos-U55) on MPS3 (AN547) |
|
TI MSP-EXP432P401R LAUNCHXL |
|
ARM Cortex-M33 SMM on V2M-MUSCA |
|
ARM Cortex-M33 SMM on V2M-MUSCA-S1 |
|
Native POSIX for 32-bit host |
|
Native POSIX for 64-bit host |
|
Nuvoton NPCX7M6FB EVB Development board |
|
Nuvoton NPCX9M6F EVB Development board |
|
nRF21540 DK NRF52840 |
|
nRF51 DK NRF51422 |
|
nRF51 Dongle NRF51422 |
|
nRF51 BLE400 |
|
nRF51 BLENANO |
|
nRF51 VBLUno51 BLE |
|
nRF52832-MDK |
|
nRF52833 DK NRF52820 |
|
NRF52833 DK NRF52833 |
|
nRF52840 DK NRF52811 |
|
nRF52840 DK NRF52840 |
|
nRF52840 DONGLE NRF52840 |
|
Electronut Labs Blip |
|
NRF52840-MDK |
|
NRF52840 PAPYR |
|
nRF52 DK NRF52805 |
|
nRF52 DK NRF52810 |
|
nRF52 DK NRF52832 |
|
nRF52 ADAFRUIT FEATHER |
|
nRF52 BLENANO2 |
|
NRF52 simulation model |
|
nRF52 SPARKFUN |
|
nRF52 VBLUno52 |
|
nRF5340 DK nRF5340 Application MCU |
|
nRF5340 DK nRF5340 Application MCU non-secure |
|
nRF5340 DK NRF5340 Network MCU |
|
NRF9160 DK NRF52840 |
|
nRF9160 DK NRF9160 |
|
nRF9160 DK NRF9160 non-secure |
|
nRF9160 innblue v2.1 |
|
nRF9160 innblue v2.1 non-secure |
|
nRF9160 innblue v2.2 |
|
nRF9160 innblue V2.2 non-secure |
|
ARC nSIM simulator |
|
NUCLEO-64 F030R8 Development Board |
|
NUCLEO-32 F031K6 Development Board |
|
NUCLEO-64 F070RB Development Board |
|
NUCLEO-64 F091RC Development Board |
|
NUCLEO-64 F103RB Development Board |
|
NUCLEO-144 F207ZG Development Board |
|
NUCLEO-64 F302R8 Development Board |
|
NUCLEO-32 F303K8 Development Board |
|
NUCLEO-64 F303RE Development Board |
|
NUCLEO-64 F334R8 Development Board |
|
NUCLEO-64 F401RE Development Board |
|
Nucleo F410RB Development Board |
|
NUCLEO-64 F411RE Development Board |
|
NUCLEO-144 F412ZG Development Board |
|
NUCLEO-144 F413ZH Development Board |
|
NUCLEO-144 F429ZI Development Board |
|
Nucleo F446RE Development Board |
|
Nucleo F746ZG Development Board |
|
Nucleo F756ZG Development Board |
|
Nucleo F767ZI Development Board |
|
NUCLEO-64 G071RB Development Board |
|
NUCLEO-64 G0B1RE Development Board |
|
Nucleo G431RB Development Board |
|
Nucleo G474RE Development Board |
|
NUCLEO-H723ZG Development Board |
|
Nucleo H743ZI Development Board |
|
NUCLEO-H745ZI-Q Development Board |
|
NUCLEO-H745ZI-Q Development Board |
|
Nucleo H753ZI Development Board |
|
NUCLEO-32 L011K4 Development Board |
|
NUCLEO-32 L031K6 Development Board |
|
NUCLEO-64 L053R8 Development Board |
|
NUCLEO-64 L073RZ Development Board |
|
NUCLEO-64 L152RE Development Board |
|
Nucleo L412RB-P Development Board |
|
Nucleo L432KC Development Board |
|
Nucleo L433RC-P Development Board |
|
Nucleo L452RE Development Board |
|
Nucleo L452RE-P Development Board |
|
Nucleo L476RG Development Board |
|
Nucleo L496ZG Development Board |
|
Nucleo L4R5ZI Development Board |
|
Nucleo L552ZE Q Development Board |
|
Nucleo U575ZI Q Development Board |
|
Nucleo WB55RG Development Board |
|
Nucleo WL55JC Development Board |
|
NUVOTON PFM MP487 Development Board |
|
NXP ADSP i.MX8 |
|
NXP Layerscape ls1046ardb |
|
ODROID-GO Game Kit |
|
OLIMEXINO-STM32 Development Board |
|
OLIMEX-STM32-E407 Development Board |
|
OLIMEX-STM32-H103 Development Board |
|
OLIMEX-STM32-H407 Development Board |
|
OLIMEX-STM32-P405 Development Board |
|
Particle Argon Board |
|
Particle Boron Board |
|
Particle Xenon Board |
|
Pico-PI iMX7D Dual |
|
PineTime DevKit0 |
|
Pinnacle 100 DVK |
|
ARC QEMU for EM & HS cores |
|
Cortex-A53 Emulation (QEMU) |
|
Cortex-M0 Emulation (QEMU) |
|
Cortex-M3 Emulation (QEMU) |
|
Cortex-R5 Emulation (QEMU) |
|
QEMU LEON3 target |
|
QEMU NIOS II target |
|
QEMU RISCV32 target |
|
QEMU RISCV32 XIP target |
|
QEMU RISCV64 target |
|
QEMU x86 |
|
QEMU x86_64 |
|
QEMU x86 (Lakemont) |
|
QEMU x86 (tiny memory) |
|
Xtensa emulation using QEMU |
|
QuickLogic Quick Feather target |
|
RAK4631 DK NRF52840 |
|
RAK5010 DK NRF52840 |
|
Cortex-R7 for Renesas H3ULCB |
|
reel board equipped with GDEH0213B1 display |
|
reel board equipped with GDEH0213B72 display |
|
Ronoth LoDev |
|
Ruuvi-RuuviTag |
|
RV32M1 RISC-V cores |
|
Atmel SAM4E Xplained Pro |
|
Atmel SAM4L-EK |
|
Atmel SAM4S Xplained |
|
Atmel SMART SAM E70 Xplained Board |
|
Atmel SMART SAM V71 Xplained Ultra Board |
|
Seeeduino XIAO |
|
SEGGER STM32F407 Trace Reference Board |
|
Use external SIM |
|
SensorTile.box Development Board |
|
Serpente |
|
Sparkfun nRF9160 Thing Plus |
|
Sparkfun nRF9160 Thing Plus non-secure |
|
STM32 Flight Controller Unit |
|
STM3210C-EVAL Evaluation Board |
|
STM32373C_EVAL Evaluation Board |
|
STM32F030 DEMO Board |
|
STM32F072B-DISCO Development Board |
|
STM32F072-EVAL Development Board |
|
STM32F0DISCOVERY Development Board |
|
STM32F103RCT6 Mini Board |
|
STM32F3DISCOVERY Development Board |
|
STM32F411E-DISCO Development Board |
|
STM32F412G-DISCO Development Board |
|
STM32F429I-DISC1 Development Board |
|
STM32F469I-DISCO Development Board |
|
STM32F4DISCOVERY Development Board |
|
STM32F723E Discovery Development Board |
|
STM32F746G Discovery Development Board |
|
STM32F769I Discovery Development Board |
|
STM32G0316 Discovery Development Board |
|
STM32G071B Discovery Board |
|
STM32H735G Discovery Development Board |
|
STM32H747I Discovery Development Board |
|
STM32H747I Discovery Development Board |
|
STM32L1DISCOVERY Development Board |
|
STM32L476G Discovery Development Board |
|
STM32L496G Discovery Development Board |
|
STM32L562E-DK Discovery Development Board |
|
STM32MP157C Discovery Development 2 Board |
|
STM32VLDISCOVERY Development Board |
|
STM32 Minimum Development Board (Black) |
|
STM32 Minimum Development Board (Blue) |
|
PJRC TEENSY40 |
|
PJRC TEENSY41 |
|
Thingy52 NRF52832 |
|
Thingy53 nRF5340 Application MCU |
|
Thingy53 nRF5340 Application MCU non-secure |
|
Thingy53 nRF5340 Network MCU |
|
Telink B91 Platform |
|
NXP TWR-KE18F |
|
Enable CLKOUT signal on FlexIO header |
|
Use PTE6 as dedicated SPI_0 PCS2 chip select |
|
Use PTD3 as dedicated SPI_1 PCS0 chip select |
|
Use PTA16 as dedicated SPI_1 PCS2 chip select |
|
NXP TWR-KV58F220M |
|
u-blox BMD-300-EVAL |
|
u-blox BMD-330-EVAL |
|
u-blox BMD-340-EVAL |
|
u-blox BMD-345-EVAL |
|
u-blox BMD-360-EVAL |
|
u-blox BMD-380-EVAL |
|
u-blox EVK-ANNA-B1 |
|
u-blox EVK-NINA-B1 |
|
u-blox EVK-NINA-B3 |
|
u-blox EVK-NINA-B4 |
|
UDOO Neo Full |
|
UP Squared (x86_64) |
|
NXP USB-KW24D512 |
|
ARM V2M Beetle Board |
|
Broadcom Valkyrie BCM958401M2 |
|
VDD power rail init priority |
|
WaRP7 iMX7 Solo |
|
Waveshare OPEN103Z Development Board |
|
Xen Virtual Machine |
|
Infineon Relax Kit |
|
Xtensa Development ISS |
|
Xtensa Development ISS |
|
Bluetooth |
|
Enable ACI message with with BlueNRG-based devices |
|
Central Role support |
|
Bluetooth Controller |
|
Enable ECDH key generation support |
|
Controller to Host ACL flow control support |
|
Zephyr HCI Vendor-Specific Commands |
|
Zephyr HCI Vendor-Specific Extensions |
|
L2CAP Dynamic Channel support |
|
Peripheral Role support |
|
Security Manager Protocol support |
|
Enable compatibility with BlueNRG-based devices |
|
Wait for “NOP” Command Complete event during init |
|
Build a binary in BIN format |
|
Build a binary in ELF format with .exe extension |
|
Build a binary in HEX format |
|
Build a stripped binary |
|
Build with TF-M as the Secure Execution Environment |
|
MCP2515 CAN Driver |
|
Parent interrupt number to which CAVS_0 maps |
|
Parent interrupt number to which CAVS_1 maps |
|
Parent interrupt number to which CAVS_2 maps |
|
Parent interrupt number to which CAVS_3 maps |
|
Offset in the SW ISR Table |
|
Internal high frequency RC oscillator frequency |
|
External high frequency oscillator frequency |
|
External low frequency oscillator frequency |
|
base length of the random generated initial ACK timeout in ms |
|
Compile C/C++ functions using Thumb-2 instruction set |
|
Silicon Labs Gecko Counter (RTCC) driver |
|
Path to custom linker script |
|
TI DACx0508 DAC driver |
|
Number of page frames reserved for paging |
|
SDMMC card driver |
|
Flash device erasable block size in hex |
|
Flash device name to be used as storage backend |
|
Flash device erase alignment in hex |
|
Flash device max read-write size in decimal |
|
Flash device start address in hex |
|
Flash device volume size in hex |
|
Enable DesignWare DMA driver |
|
Enable support for KSZ8794 |
|
Parent interrupt number to which DW_ICTL maps |
|
Offset in the SW ISR Table |
|
Atmel AT24 (and compatible) I2C EEPROM support |
|
Atmel AT25 (and compatible) SPI EEPROM support |
|
Simulated EEPROM driver |
|
Emulation drivers |
|
ESP32 entropy number generator driver |
|
Entropy Drivers |
|
Telink B91 Entropy driver |
|
8042 kbc peripheral |
|
XEC Microchip ESPI driver |
|
ENC28J60C Ethernet Controller |
|
ENC28J60C Ethernet port 0 |
|
ENC424J600C Ethernet Controller |
|
SiLabs Gecko Ethernet driver |
|
MCUX Ethernet driver |
|
Do not use SMI for PHY communication |
|
Enable RMII clock from external sources |
|
Native Posix Ethernet driver |
|
Atmel SAM Ethernet driver |
|
I2C bus driver device name |
|
Read from an I2C EEPROM |
|
I2C EEPROM internal address |
|
I2C EEPROM internal address size |
|
I2C 7-bit EEPROM chip address |
|
Native posix entropy driver |
|
Flash hardware support |
|
Flash Base Address |
|
Kernel load offset |
|
Kernel load size |
|
MCUX FlexSPI MX25UM51345G driver |
|
MCUX FlexSPI NOR driver |
|
MCUX FlexSPI flash access with xip |
|
API for retrieving the layout of pages |
|
Flash simulator |
|
Flash Size in kB |
|
FT800 Embedded Video Engine driver |
|
Data ready interrupt to INT1 pin |
|
Data ready interrupt to INT1 pin |
|
GD7965 compatible display controller driver |
|
GPIO Drivers |
|
GPIO as pin reset (reset button) |
|
ARM CMSDK (Cortex-M System Design Kit) AHB GPIO Controllers |
|
CY8C95XX I2C GPIO chip |
|
Designware GPIO |
|
Designware GPIO block 0 |
|
Designware GPIO block 1 |
|
Designware GPIO block 1 |
|
Designware GPIO block 1 |
|
nRF GPIO Port P1 |
|
Atmel SAM GPIO (PORT) driver |
|
SNPS CREG GPIO |
|
TI Stellaris GPIO Driver |
|
Telink B91 GPIO driver |
|
Xilinx AXI GPIO driver |
|
Custom linker script provided |
|
Heap memory pool size (in bytes) |
|
HPET timer |
|
Hardware Stack Protection |
|
I2C Drivers |
|
Enable I2C Port 0 |
|
Enable I2C Port 1 |
|
CC32XX I2C driver |
|
Design Ware I2C support |
|
Set the clock speed for I2C |
|
I2C emulator |
|
nRF TWI nrfx drivers |
|
Atmel SAM (TWI) I2C driver |
|
I2C driver for ARM’s SBCon two-wire serial bus interface |
|
Sifive I2C driver |
|
Telink Semiconductor B91 I2C driver |
|
Intel I2S (SSP) Bus Driver |
|
Division factor for PLLI2S VCO input clock |
|
Multiplier factor for PLLI2S VCO output clock |
|
Division factor for I2S clock |
|
Enable usage of PLL |
|
Size of stack for idle thread |
|
Decawave DW1000 Driver support |
|
NXP MCR20A Driver support |
|
nRF52 series IEEE 802.15.4 Driver |
|
ATMEL RF2XX Driver support |
|
Telink B91 RF driver |
|
ILI9340 display driver |
|
ILI9488 display driver |
|
Intel GNA Inferencing Engine |
|
Stack size for IPM console receiver thread |
|
IPM MHU driver |
|
Enable IPM Message Channel 0 |
|
IPM Message RX Channel |
|
IPM Message TX Channel |
|
Enable IPM Message Channel 1 |
|
IPM Message RX Channel |
|
IPM Message TX Channel |
|
IPM NRF driver |
|
ISR and initialization stack size (in bytes) |
|
Size of kernel address space in bytes |
|
Keyboard Scan Drivers |
|
FT5XX6/FT6XX6 capacitive touch panel driver |
|
Enable interrupt |
|
SDL event filter for touch panel emulation |
|
Gecko leuart driver |
|
Enable native backend |
|
Set SWO output frequency |
|
Number of bytes dedicated for the logger internal buffer |
|
LS0XX memory display controller driver |
|
Enable I2C sensorhub feature |
|
Number of bits per pixel |
|
RGB565 byte swap |
|
Display device name |
|
Dots per inch |
|
Horizantal resolution |
|
Keyboard scan pointer input |
|
Keyboard scan device name for pointer input |
|
Invert keyboard scan X axis |
|
Invert keyboard scan Y axis |
|
Swap keyboard scan X,Y axes |
|
Display buffer percentage |
|
Vertical resolution |
|
Size of stack for initialization and main thread |
|
Max IRQs per interrupt aggregator |
|
Fast internal reference clock divider |
|
FLL external reference divider |
|
PLL external reference divider |
|
VCO 0 divider |
|
MCR20A device is part of KW2xD SiP |
|
Modem Drivers |
|
Enable Sierra Wireless HL7800 modem driver |
|
Enable quectel modem driver |
|
Enable modem shell utilities |
|
Enable u-blox SARA modem driver |
|
Enable support for network status indication |
|
Enable Wistron LTE-M modem driver |
|
Number of CPUs/cores |
|
Generate multiboot header |
|
Preserve multiboot information structure |
|
Use multiboot memory map if provided |
|
Use the host terminal for console |
|
Slow down execution to real time |
|
IEEE 802.15.4 device name |
|
This application wants IPv6 support |
|
Network Drivers |
|
IPv6 |
|
Enable Bluetooth support |
|
***Workaround to work with Linux.*** |
|
Enable Ethernet support |
|
QSPI NOR Flash |
|
Enable SPIM driver |
|
Enable TWIM driver |
|
nRF Real Time Counter (NRF_RTC1) Timer |
|
nRF Timer Counter (NRF_TIMER0) Timer |
|
Total number of second level interrupt aggregators |
|
Total number of third level interrupt aggregators |
|
Upper limit of interrupt numbers/IDs used |
|
External oscillator frequency |
|
Print memory usage to stdout |
|
ARM V2M Beetle Pin multiplexer driver |
|
Intel S1000 I/O multiplexer driver |
|
Telink Semiconductor B91 pinmux driver |
|
Size of privileged stack |
|
PS2_XEC_0 |
|
PS2_XEC_1 |
|
SiFive Freedom PWM driver |
|
Telink Semiconductor B91 PWM driver |
|
QEMU icount mode |
|
QEMU icount shift value |
|
QEMU ivshmem-plain shared memory size in mega-bytes |
|
QEMU uses UEFI to boot up |
|
Regulator drivers |
|
ROM Start Offset accounting for BL2 Header in the NS image |
|
INTMUX channel 2 |
|
INTMUX channel 3 |
|
SDL based emulated display |
|
Serial Drivers |
|
Interrupt driven |
|
Nios-II QSPI flash driver |
|
Nios-II QSPI flash device name |
|
Telink Semiconductor B91 flash driver |
|
CASA instructions |
|
SPI hardware bus support |
|
Designware SPI controller driver |
|
DesignWare SPI only allows word access |
|
Registers are part of ARC auxiliary registers |
|
RX and TX FIFO Depth |
|
SPI NOR Flash |
|
nRF SPI nrfx drivers |
|
SiFive SPI controller driver |
|
STM32 MCU SPI Interrupt Support |
|
Telink Semiconductor B91 SPI driver |
|
Microchip XEC QMSPI driver |
|
Xilinx AXI Quad SPI driver |
|
SRAM Size in kB |
|
SSD1306 display driver |
|
SSD16XX compatible display controller driver |
|
ST7735R display driver |
|
ST7789V display driver |
|
Enable Dual Core |
|
System oscillator settling time |
|
Hardware clock cycles per second, 2000000 for ISS |
|
System tick frequency (in ticks/second) |
|
XEC Tachometer sensor |
|
NXP Kinetis Temperature Sensor |
|
Test function extra thread stack size |
|
Init priority |
|
MISO workaround |
|
ARM CMSDK (Cortex-M System Design Kit) DTMR Timer driver |
|
ARM CMSDK (Cortex-M System Design Kit) Timer driver |
|
ARM CMSDK APB UART driver |
|
Use UART for console |
|
Gecko UART/USART driver |
|
Enable UART Interrupt support |
|
Enable Serial Line Control API |
|
UART driver for native_posix |
|
nRF UART nrfx drivers |
|
NS16550 serial driver |
|
ARM PL011 UART Driver |
|
Enable driver for UART 0 |
|
Enable driver for UART 1 |
|
RV32M1 LPUART driver |
|
SiFive Freedom serial driver |
|
Telink B91 UART driver |
|
Xilinx UART Lite |
|
Atmel SAM MCU family USART driver |
|
USB manufacturer name |
|
USB Ethernet Control Model (ECM) Networking device |
|
USB Ethernet Emulation Model (EEM) Networking device |
|
USB Product ID |
|
USB product name |
|
USB Device Support |
|
USB Vendor ID |
|
Designware USB Device Controller Driver |
|
DesignWare Controller and PHY support for USB specification 2.0 |
|
Native Posix USB Device Controller Driver |
|
USBD attached event delay |
|
Set buffer size for Standard, Class and Vendor request handlers |
|
Use USB port for console outputs |
|
Link application into /chosen/zephyr,code-partition from devicetree |
|
CMSDK APB Watchdog Driver for ARM family of MCUs |
|
Wi-Fi Drivers |
|
Espressif AT Command support |
|
Inventek eS-WiFi support |
|
WINC1500 driver support |
|
Reserve extra pages in page table |
|
External oscillator frequency |
|
Test function thread stack size |