CONFIG_MCG_VDIV0¶

VCO 0 divider

Type: hex

Help¶

Selects the amount to divide the VCO output of the PLL. The VDIV 0 bits
establish the multiplication factor (M) applied to the reference clock
frequency.

Help¶

Selects the amount to divide the VCO output of the PLL. The VDIV 0 bits
establish the multiplication factor (M) applied to the reference clock
frequency.

Direct dependencies¶

BOARD_FRDM_K22F || BOARD_FRDM_K64F || BOARD_FRDM_K82F || BOARD_FRDM_KL25Z || BOARD_HEXIWEAR_K64 || BOARD_IP_K66F || BOARD_TWR_KV58F220M || BOARD_USB_KW24D512 || (HAS_MCG && SOC_FAMILY_KINETIS) || (HAS_MCG && SOC_FAMILY_KINETIS)

(Includes any dependencies from ifs and menus.)

Defaults¶

0xc
0x18
0x4
0x00
0x06
0xe
0x16
0x0
0
0

Kconfig definitions¶

At <Zephyr Boards>/arm/frdm_k22f/Kconfig.defconfig:17

Included via Kconfig:8 → Kconfig.zephyr:22

Menu path: (Top)

config MCG_VDIV0
    hex
    default 0xc
    depends on BOARD_FRDM_K22F

At <Zephyr Boards>/arm/frdm_k64f/Kconfig.defconfig:17

Included via Kconfig:8 → Kconfig.zephyr:22

Menu path: (Top)

config MCG_VDIV0
    hex
    default 0x18
    depends on BOARD_FRDM_K64F

At <Zephyr Boards>/arm/frdm_k82f/Kconfig.defconfig:17

Included via Kconfig:8 → Kconfig.zephyr:22

Menu path: (Top)

config MCG_VDIV0
    hex
    default 0x4
    depends on BOARD_FRDM_K82F

At <Zephyr Boards>/arm/frdm_kl25z/Kconfig.defconfig:17

Included via Kconfig:8 → Kconfig.zephyr:22

Menu path: (Top)

config MCG_VDIV0
    hex
    default 0x00
    depends on BOARD_FRDM_KL25Z

At <Zephyr Boards>/arm/hexiwear_k64/Kconfig.defconfig:17

Included via Kconfig:8 → Kconfig.zephyr:22

Menu path: (Top)

config MCG_VDIV0
    hex
    default 0x06
    depends on BOARD_HEXIWEAR_K64

At <Zephyr Boards>/arm/ip_k66f/Kconfig.defconfig:17

Included via Kconfig:8 → Kconfig.zephyr:22

Menu path: (Top)

config MCG_VDIV0
    hex
    default 0xe
    depends on BOARD_IP_K66F

At <Zephyr Boards>/arm/twr_kv58f220m/Kconfig.defconfig:17

Included via Kconfig:8 → Kconfig.zephyr:22

Menu path: (Top)

config MCG_VDIV0
    hex
    default 0x16
    depends on BOARD_TWR_KV58F220M

At <Zephyr Boards>/arm/usb_kw24d512/Kconfig.defconfig:21

Included via Kconfig:8 → Kconfig.zephyr:22

Menu path: (Top)

config MCG_VDIV0
    hex
    default 0x0
    depends on BOARD_USB_KW24D512

At <Zephyr SoC>/arm/nxp_kinetis/Kconfig:77

Included via Kconfig:8 → Kconfig.zephyr:38 → <Zephyr SoC>/Kconfig:15 → <BuildDir>/kconfig/Kconfig.soc.arch:2

Menu path: (Top) → Hardware Configuration

config MCG_VDIV0
    hex "VCO 0 divider"
    range 0 0x1F
    default 0
    depends on HAS_MCG && SOC_FAMILY_KINETIS
    help
      Selects the amount to divide the VCO output of the PLL. The VDIV 0 bits
      establish the multiplication factor (M) applied to the reference clock
      frequency.

At <Zephyr SoC>/arm/nxp_kinetis/Kconfig:77

Included via Kconfig:8 → Kconfig.zephyr:38 → <Zephyr SoC>/Kconfig:18

Menu path: (Top) → Hardware Configuration

config MCG_VDIV0
    hex "VCO 0 divider"
    range 0 0x1F
    default 0
    depends on HAS_MCG && SOC_FAMILY_KINETIS
    help
      Selects the amount to divide the VCO output of the PLL. The VDIV 0 bits
      establish the multiplication factor (M) applied to the reference clock
      frequency.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)