CONFIG_UART_GECKO¶
Gecko UART/USART driver
Type: bool
Help¶
Enable the Gecko uart driver.
Direct dependencies¶
(SERIAL && BOARD_EFR32_RADIO) || (SERIAL && SOC_SERIES_EFM32GG11B && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFM32HG && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFM32JG12B && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFM32PG12B && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFM32PG1B && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFM32WG && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFR32FG13P && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFR32FG1P && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFR32MG12P && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFR32MG21 && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFM32GG11B && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFM32HG && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFM32JG12B && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFM32PG12B && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFM32PG1B && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFM32WG && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFR32FG13P && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFR32FG1P && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFR32MG12P && SOC_FAMILY_EXX32) || (SERIAL && SOC_SERIES_EFR32MG21 && SOC_FAMILY_EXX32) || (HAS_SILABS_GECKO && GPIO_GECKO && SERIAL)
(Includes any dependencies from ifs and menus.)
Defaults¶
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
Symbols selected by this symbol¶
Kconfig definitions¶
At <Zephyr Boards>/arm/efr32_radio/Kconfig.defconfig:25
Included via Kconfig:8 → Kconfig.zephyr:22
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && BOARD_EFR32_RADIO
At <Zephyr SoC>/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.efm32gg11b:12
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.series:20
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFM32GG11B && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efm32hg/Kconfig.defconfig.efm32hg:10
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efm32hg/Kconfig.defconfig.series:19
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFM32HG && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.efm32jg12b:12
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.series:18
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFM32JG12B && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.efm32pg12b:12
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.series:18
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFM32PG12B && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efm32pg1b/Kconfig.defconfig.efm32pg1b:12
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efm32pg1b/Kconfig.defconfig.series:18
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFM32PG1B && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efm32wg/Kconfig.defconfig.efm32wg:10
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efm32wg/Kconfig.defconfig.series:18
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFM32WG && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efr32fg13p/Kconfig.defconfig.efr32fg13p:10
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efr32fg13p/Kconfig.defconfig.series:18
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFR32FG13P && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efr32fg1p/Kconfig.defconfig.efr32fg1p:10
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efr32fg1p/Kconfig.defconfig.series:18
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFR32FG1P && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.efr32mg12p:12
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.series:18
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFR32MG12P && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efr32mg21/Kconfig.defconfig.efr32mg21:10
Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efr32mg21/Kconfig.defconfig.series:19
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFR32MG21 && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.efm32gg11b:12
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.series:20
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFM32GG11B && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efm32hg/Kconfig.defconfig.efm32hg:10
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efm32hg/Kconfig.defconfig.series:19
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFM32HG && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.efm32jg12b:12
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.series:18
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFM32JG12B && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.efm32pg12b:12
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.series:18
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFM32PG12B && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efm32pg1b/Kconfig.defconfig.efm32pg1b:12
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efm32pg1b/Kconfig.defconfig.series:18
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFM32PG1B && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efm32wg/Kconfig.defconfig.efm32wg:10
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efm32wg/Kconfig.defconfig.series:18
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFM32WG && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efr32fg13p/Kconfig.defconfig.efr32fg13p:10
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efr32fg13p/Kconfig.defconfig.series:18
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFR32FG13P && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efr32fg1p/Kconfig.defconfig.efr32fg1p:10
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efr32fg1p/Kconfig.defconfig.series:18
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFR32FG1P && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.efr32mg12p:12
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.series:18
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFR32MG12P && SOC_FAMILY_EXX32
At <Zephyr SoC>/arm/silabs_exx32/efr32mg21/Kconfig.defconfig.efr32mg21:10
Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5 → <Zephyr SoC>/arm/silabs_exx32/efr32mg21/Kconfig.defconfig.series:19
Menu path: (Top)
config UART_GECKO
bool
default y
depends on SERIAL && SOC_SERIES_EFR32MG21 && SOC_FAMILY_EXX32
At <Zephyr Driver>/serial/Kconfig.gecko:6
Included via Kconfig:8 → Kconfig.zephyr:42 → <Zephyr Driver>/Kconfig:26 → <Zephyr Driver>/serial/Kconfig:134
Menu path: (Top) → Device Drivers → Serial Drivers
config UART_GECKO
bool "Gecko UART/USART driver"
select SERIAL_HAS_DRIVER
select SERIAL_SUPPORT_INTERRUPT
select SOC_GECKO_USART
depends on HAS_SILABS_GECKO && GPIO_GECKO && SERIAL
help
Enable the Gecko uart driver.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)