CONFIG_SOC_ATMEL_SAM4S_PLLA_MULA¶

PLL MULA

Type: hex

Help¶

This is the multiplier (MULA) used by the PLL.
The processor clock is (MAINCK * (MULA + 1) / DIVA).

Board config file can override this settings
for a particular board.

With default of MULA == 9, and DIVA == 1,
PLL is running at 10 times of main clock.

Help¶

This is the multiplier (MULA) used by the PLL.
The processor clock is (MAINCK * (MULA + 1) / DIVA).

Board config file can override this settings
for a particular board.

With default of MULA == 9, and DIVA == 1,
PLL is running at 10 times of main clock.

Direct dependencies¶

(SOC_SERIES_SAM4S && SOC_FAMILY_SAM) || (SOC_SERIES_SAM4S && SOC_FAMILY_SAM)

(Includes any dependencies from ifs and menus.)

Defaults¶

0x09
0x09

Kconfig definitions¶

At <Zephyr SoC>/arm/atmel_sam/sam4s/Kconfig.soc:76

Included via Kconfig:8 → Kconfig.zephyr:38 → <Zephyr SoC>/Kconfig:15 → <BuildDir>/kconfig/Kconfig.soc.arch:2 → <Zephyr SoC>/arm/atmel_sam/Kconfig:17

Menu path: (Top) → Hardware Configuration

config SOC_ATMEL_SAM4S_PLLA_MULA
    hex "PLL MULA"
    default 0x09
    depends on SOC_SERIES_SAM4S && SOC_FAMILY_SAM
    help
      This is the multiplier (MULA) used by the PLL.
      The processor clock is (MAINCK * (MULA + 1) / DIVA).

      Board config file can override this settings
      for a particular board.

      With default of MULA == 9, and DIVA == 1,
      PLL is running at 10 times of main clock.

At <Zephyr SoC>/arm/atmel_sam/sam4s/Kconfig.soc:76

Included via Kconfig:8 → Kconfig.zephyr:38 → <Zephyr SoC>/Kconfig:18 → <Zephyr SoC>/arm/atmel_sam/Kconfig:17

Menu path: (Top) → Hardware Configuration

config SOC_ATMEL_SAM4S_PLLA_MULA
    hex "PLL MULA"
    default 0x09
    depends on SOC_SERIES_SAM4S && SOC_FAMILY_SAM
    help
      This is the multiplier (MULA) used by the PLL.
      The processor clock is (MAINCK * (MULA + 1) / DIVA).

      Board config file can override this settings
      for a particular board.

      With default of MULA == 9, and DIVA == 1,
      PLL is running at 10 times of main clock.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)