CONFIG_TACH_NPCX¶

Nuvoton NPCX Tachometer sensor

Type: bool

Help¶

Enable support for NPCX tachometer sensor driver. The NPCX7 series
contains two tachometer (TACH) modules that contains two counters
(counter A and B). They are used to capture/compare a counter value
when an event is generated on comparison of signals match.

Help¶

Enable support for NPCX tachometer sensor driver. The NPCX9 series
contains two tachometer (TACH) modules that contains two counters
(counter A and B). They are used to capture/compare a counter value
when an event is generated on comparison of signals match.

Help¶

Enable support for NPCX tachometer sensor driver. The NPCX7 series
contains two tachometer (TACH) modules that contains two counters
(counter A and B). They are used to capture/compare a counter value
when an event is generated on comparison of signals match.

Help¶

Enable support for NPCX tachometer sensor driver. The NPCX9 series
contains two tachometer (TACH) modules that contains two counters
(counter A and B). They are used to capture/compare a counter value
when an event is generated on comparison of signals match.

Help¶

Enable the "Nuvoton NPCX tachometer sensor.

Direct dependencies¶

(SENSOR && SOC_SERIES_NPCX7) || (SENSOR && SOC_SERIES_NPCX9) || (SENSOR && SOC_SERIES_NPCX7) || (SENSOR && SOC_SERIES_NPCX9) || (SOC_FAMILY_NPCX && SENSOR)

(Includes any dependencies from ifs and menus.)

Defaults¶

y
y
y
y

Kconfig definitions¶

At <Zephyr SoC>/arm/nuvoton_npcx/npcx7/Kconfig.defconfig.series:85

Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/nuvoton_npcx/Kconfig.defconfig:6

Menu path: (Top)

config TACH_NPCX
    bool
    default y
    depends on SENSOR && SOC_SERIES_NPCX7
    help
      Enable support for NPCX tachometer sensor driver. The NPCX7 series
      contains two tachometer (TACH) modules that contains two counters
      (counter A and B). They are used to capture/compare a counter value
      when an event is generated on comparison of signals match.

At <Zephyr SoC>/arm/nuvoton_npcx/npcx9/Kconfig.defconfig.series:95

Included via Kconfig:8 → Kconfig.zephyr:25 → <BuildDir>/kconfig/Kconfig.soc.defconfig:1 → <Zephyr SoC>/arm/nuvoton_npcx/Kconfig.defconfig:6

Menu path: (Top)

config TACH_NPCX
    bool
    default y
    depends on SENSOR && SOC_SERIES_NPCX9
    help
      Enable support for NPCX tachometer sensor driver. The NPCX9 series
      contains two tachometer (TACH) modules that contains two counters
      (counter A and B). They are used to capture/compare a counter value
      when an event is generated on comparison of signals match.

At <Zephyr SoC>/arm/nuvoton_npcx/npcx7/Kconfig.defconfig.series:85

Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/nuvoton_npcx/Kconfig.defconfig:6

Menu path: (Top)

config TACH_NPCX
    bool
    default y
    depends on SENSOR && SOC_SERIES_NPCX7
    help
      Enable support for NPCX tachometer sensor driver. The NPCX7 series
      contains two tachometer (TACH) modules that contains two counters
      (counter A and B). They are used to capture/compare a counter value
      when an event is generated on comparison of signals match.

At <Zephyr SoC>/arm/nuvoton_npcx/npcx9/Kconfig.defconfig.series:95

Included via Kconfig:8 → Kconfig.zephyr:27 → <Zephyr SoC>/arm/nuvoton_npcx/Kconfig.defconfig:6

Menu path: (Top)

config TACH_NPCX
    bool
    default y
    depends on SENSOR && SOC_SERIES_NPCX9
    help
      Enable support for NPCX tachometer sensor driver. The NPCX9 series
      contains two tachometer (TACH) modules that contains two counters
      (counter A and B). They are used to capture/compare a counter value
      when an event is generated on comparison of signals match.

At <Zephyr Driver>/sensor/nuvoton_tach_npcx/Kconfig:6

Included via Kconfig:8 → Kconfig.zephyr:42 → <Zephyr Driver>/Kconfig:64 → <Zephyr Driver>/sensor/Kconfig:231

Menu path: (Top) → Device Drivers → Sensor Drivers

config TACH_NPCX
    bool "Nuvoton NPCX Tachometer sensor"
    depends on SOC_FAMILY_NPCX && SENSOR
    help
      Enable the "Nuvoton NPCX tachometer sensor.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)