main.h File Reference

Bluetooth mesh Profile APIs. More...

Go to the source code of this file.

Data Structures
struct	bt_mesh_dev_capabilities
struct	bt_mesh_prov
struct	bt_mesh_lpn_cb
struct	bt_mesh_friend_cb

Macros
#define	BT_MESH_NET_PRIMARY   0x000
#define	BT_MESH_FEAT_RELAY   BIT(0)
#define	BT_MESH_FEAT_PROXY   BIT(1)
#define	BT_MESH_FEAT_FRIEND   BIT(2)
#define	BT_MESH_FEAT_LOW_POWER   BIT(3)
#define	BT_MESH_FEAT_SUPPORTED
#define	BT_MESH_LPN_CB_DEFINE(_name)
	Register a callback structure for Friendship events. More...
#define	BT_MESH_FRIEND_CB_DEFINE(_name)
	Register a callback structure for Friendship events. More...

Enumerations
enum	bt_mesh_output_action_t {   BT_MESH_NO_OUTPUT = 0 , BT_MESH_BLINK = BIT(0) , BT_MESH_BEEP = BIT(1) , BT_MESH_VIBRATE = BIT(2) ,   BT_MESH_DISPLAY_NUMBER = BIT(3) , BT_MESH_DISPLAY_STRING = BIT(4) }
enum	bt_mesh_input_action_t {   BT_MESH_NO_INPUT = 0 , BT_MESH_PUSH = BIT(0) , BT_MESH_TWIST = BIT(1) , BT_MESH_ENTER_NUMBER = BIT(2) ,   BT_MESH_ENTER_STRING = BIT(3) }
enum	bt_mesh_prov_bearer_t { BT_MESH_PROV_ADV = BIT(0) , BT_MESH_PROV_GATT = BIT(1) }
enum	bt_mesh_prov_oob_info_t {   BT_MESH_PROV_OOB_OTHER = BIT(0) , BT_MESH_PROV_OOB_URI = BIT(1) , BT_MESH_PROV_OOB_2D_CODE = BIT(2) , BT_MESH_PROV_OOB_BAR_CODE = BIT(3) ,   BT_MESH_PROV_OOB_NFC = BIT(4) , BT_MESH_PROV_OOB_NUMBER = BIT(5) , BT_MESH_PROV_OOB_STRING = BIT(6) , BT_MESH_PROV_OOB_ON_BOX = BIT(11) ,   BT_MESH_PROV_OOB_IN_BOX = BIT(12) , BT_MESH_PROV_OOB_ON_PAPER = BIT(13) , BT_MESH_PROV_OOB_IN_MANUAL = BIT(14) , BT_MESH_PROV_OOB_ON_DEV = BIT(15) }

Functions
int	bt_mesh_input_string (const char *str)
	Provide provisioning input OOB string. More...
int	bt_mesh_input_number (uint32_t num)
	Provide provisioning input OOB number. More...
int	bt_mesh_prov_remote_pub_key_set (const uint8_t public_key[64])
	Provide Device public key. More...
int	bt_mesh_auth_method_set_input (bt_mesh_input_action_t action, uint8_t size)
	Use Input OOB authentication. More...
int	bt_mesh_auth_method_set_output (bt_mesh_output_action_t action, uint8_t size)
	Use Output OOB authentication. More...
int	bt_mesh_auth_method_set_static (const uint8_t *static_val, uint8_t size)
	Use static OOB authentication. More...
int	bt_mesh_auth_method_set_none (void)
	Don't use OOB authentication. More...
int	bt_mesh_prov_enable (bt_mesh_prov_bearer_t bearers)
	Enable specific provisioning bearers. More...
int	bt_mesh_prov_disable (bt_mesh_prov_bearer_t bearers)
	Disable specific provisioning bearers. More...
int	bt_mesh_provision (const uint8_t net_key[16], uint16_t net_idx, uint8_t flags, uint32_t iv_index, uint16_t addr, const uint8_t dev_key[16])
	Provision the local Mesh Node. More...
int	bt_mesh_provision_adv (const uint8_t uuid[16], uint16_t net_idx, uint16_t addr, uint8_t attention_duration)
	Provision a Mesh Node using PB-ADV. More...
int	bt_mesh_provision_gatt (const uint8_t uuid[16], uint16_t net_idx, uint16_t addr, uint8_t attention_duration)
	Provision a Mesh Node using PB-GATT. More...
bool	bt_mesh_is_provisioned (void)
	Check if the local node has been provisioned. More...
int	bt_mesh_init (const struct bt_mesh_prov *prov, const struct bt_mesh_comp *comp)
	Initialize Mesh support. More...
void	bt_mesh_reset (void)
	Reset the state of the local Mesh node. More...
int	bt_mesh_suspend (void)
	Suspend the Mesh network temporarily. More...
int	bt_mesh_resume (void)
	Resume a suspended Mesh network. More...
void	bt_mesh_iv_update_test (bool enable)
	Toggle the IV Update test mode. More...
bool	bt_mesh_iv_update (void)
	Toggle the IV Update state. More...
int	bt_mesh_lpn_set (bool enable)
	Toggle the Low Power feature of the local device. More...
int	bt_mesh_lpn_poll (void)
	Send out a Friend Poll message. More...
int	bt_mesh_friend_terminate (uint16_t lpn_addr)
	Terminate Friendship. More...
void	bt_mesh_rpl_pending_store (uint16_t addr)
	Store pending RPL entry(ies) in the persistent storage. More...

Detailed Description

Bluetooth mesh Profile APIs.