| 
    Zephyr Project API
    3.3.0
    
   A Scalable Open Source RTOS 
   | 
 
Public API for SD memory card subsystem. More...
Go to the source code of this file.
Functions | |
| int | sdmmc_write_blocks (struct sd_card *card, const uint8_t *wbuf, uint32_t start_block, uint32_t num_blocks) | 
| Write blocks to SD card from buffer.  More... | |
| int | sdmmc_read_blocks (struct sd_card *card, uint8_t *rbuf, uint32_t start_block, uint32_t num_blocks) | 
| Read block from SD card to buffer.  More... | |
| int | sdmmc_ioctl (struct sd_card *card, uint8_t cmd, void *buf) | 
| Get I/O control data from SD card.  More... | |
Public API for SD memory card subsystem.
Get I/O control data from SD card.
Sends I/O control commands to SD card.
| card | SD card | 
| cmd | I/O control command | 
| buf | I/O control buf | 
| 0 | IOCTL command succeeded | 
| -ENOTSUP | IOCTL command not supported | 
| -EIO | I/O failure | 
| int sdmmc_read_blocks | ( | struct sd_card * | card, | 
| uint8_t * | rbuf, | ||
| uint32_t | start_block, | ||
| uint32_t | num_blocks | ||
| ) | 
Read block from SD card to buffer.
Reads blocks into SD buffer from SD card. For best performance, this buffer should be aligned to CONFIG_SDHC_BUFFER_ALIGNMENT
| card | SD card to read from | 
| rbuf | read buffer | 
| start_block | first block to read from | 
| num_blocks | number of blocks to read | 
| 0 | read succeeded | 
| -EBUSY | card is busy with another request | 
| -ETIMEDOUT | card read timed out | 
| -EIO | I/O error | 
| int sdmmc_write_blocks | ( | struct sd_card * | card, | 
| const uint8_t * | wbuf, | ||
| uint32_t | start_block, | ||
| uint32_t | num_blocks | ||
| ) | 
Write blocks to SD card from buffer.
Writes blocks from SD buffer to SD card. For best performance, this buffer should be aligned to CONFIG_SDHC_BUFFER_ALIGNMENT
| card | SD card to write from | 
| wbuf | write buffer | 
| start_block | first block to write to | 
| num_blocks | number of blocks to write | 
| 0 | write succeeded | 
| -EBUSY | card is busy with another request | 
| -ETIMEDOUT | card write timed out | 
| -EIO | I/O error |