hci_driver.h File Reference

Bluetooth HCI driver API. More...

#include <stdbool.h>
#include <zephyr/net/buf.h>
#include <zephyr/bluetooth/buf.h>
#include <zephyr/bluetooth/hci_vs.h>
#include <zephyr/device.h>

Go to the source code of this file.

Data Structures
struct	bt_hci_driver
	Abstraction which represents the HCI transport to the controller. More...

Macros
#define	IS_BT_QUIRK_NO_AUTO_DLE(bt_dev)   ((bt_dev)->drv->quirks & BT_QUIRK_NO_AUTO_DLE)
#define	BT_HCI_EVT_FLAG_RECV_PRIO   BIT(0)
#define	BT_HCI_EVT_FLAG_RECV   BIT(1)

Enumerations
enum	{ BT_QUIRK_NO_RESET = BIT(0) , BT_QUIRK_NO_AUTO_DLE = BIT(1) }
enum	bt_hci_driver_bus {   BT_HCI_DRIVER_BUS_VIRTUAL = 0 , BT_HCI_DRIVER_BUS_USB = 1 , BT_HCI_DRIVER_BUS_PCCARD = 2 , BT_HCI_DRIVER_BUS_UART = 3 ,   BT_HCI_DRIVER_BUS_RS232 = 4 , BT_HCI_DRIVER_BUS_PCI = 5 , BT_HCI_DRIVER_BUS_SDIO = 6 , BT_HCI_DRIVER_BUS_SPI = 7 ,   BT_HCI_DRIVER_BUS_I2C = 8 , BT_HCI_DRIVER_BUS_IPM = 9 }

Functions
static uint8_t	bt_hci_evt_get_flags (uint8_t evt)
	Get HCI event flags. More...
int	bt_recv (struct net_buf *buf)
	Receive data from the controller/HCI driver. More...
int	bt_recv_prio (struct net_buf *buf)
	Receive high priority data from the controller/HCI driver. More...
uint8_t	bt_read_static_addr (struct bt_hci_vs_static_addr addrs[], uint8_t size)
	Read static addresses from the controller. More...
int	bt_hci_driver_register (const struct bt_hci_driver *drv)
	Register a new HCI driver to the Bluetooth stack. More...
int	bt_hci_transport_setup (const struct device *dev)
	Setup the HCI transport, which usually means to reset the Bluetooth IC. More...
struct net_buf *	bt_hci_evt_create (uint8_t evt, uint8_t len)
struct net_buf *	bt_hci_cmd_complete_create (uint16_t op, uint8_t plen)
struct net_buf *	bt_hci_cmd_status_create (uint16_t op, uint8_t status)

Detailed Description

Bluetooth HCI driver API.