Attribute Protocol (ATT)

Attribute Protocol (ATT) More...

Macros
#define	BT_ATT_ERR_SUCCESS   0x00
	The ATT operation was successful.
#define	BT_ATT_ERR_INVALID_HANDLE   0x01
	The attribute handle given was not valid on the server.
#define	BT_ATT_ERR_READ_NOT_PERMITTED   0x02
	The attribute cannot be read.
#define	BT_ATT_ERR_WRITE_NOT_PERMITTED   0x03
	The attribute cannot be written.
#define	BT_ATT_ERR_INVALID_PDU   0x04
	The attribute PDU was invalid.
#define	BT_ATT_ERR_AUTHENTICATION   0x05
	The attribute requires authentication before it can be read or written.
#define	BT_ATT_ERR_NOT_SUPPORTED   0x06
	The ATT Server does not support the request received from the client.
#define	BT_ATT_ERR_INVALID_OFFSET   0x07
	Offset specified was past the end of the attribute.
#define	BT_ATT_ERR_AUTHORIZATION   0x08
	The attribute requires authorization before it can be read or written.
#define	BT_ATT_ERR_PREPARE_QUEUE_FULL   0x09
	Too many prepare writes have been queued.
#define	BT_ATT_ERR_ATTRIBUTE_NOT_FOUND   0x0a
	No attribute found within the given attribute handle range.
#define	BT_ATT_ERR_ATTRIBUTE_NOT_LONG   0x0b
	The attribute cannot be read using the ATT_READ_BLOB_REQ PDU.
#define	BT_ATT_ERR_ENCRYPTION_KEY_SIZE   0x0c
	The Encryption Key Size used for encrypting this link is too short.
#define	BT_ATT_ERR_INVALID_ATTRIBUTE_LEN   0x0d
	The attribute value length is invalid for the operation.
#define	BT_ATT_ERR_UNLIKELY   0x0e
	The attribute request that was requested has encountered an error that was unlikely.
#define	BT_ATT_ERR_INSUFFICIENT_ENCRYPTION   0x0f
	The attribute requires encryption before it can be read or written.
#define	BT_ATT_ERR_UNSUPPORTED_GROUP_TYPE   0x10
	The attribute type is not a supported grouping attribute.
#define	BT_ATT_ERR_INSUFFICIENT_RESOURCES   0x11
	Insufficient Resources to complete the request.
#define	BT_ATT_ERR_DB_OUT_OF_SYNC   0x12
	The server requests the client to rediscover the database.
#define	BT_ATT_ERR_VALUE_NOT_ALLOWED   0x13
	The attribute parameter value was not allowed.
#define	BT_ATT_ERR_WRITE_REQ_REJECTED   0xfc
	Write Request Rejected.
#define	BT_ATT_ERR_CCC_IMPROPER_CONF   0xfd
	Client Characteristic Configuration Descriptor Improperly Configured.
#define	BT_ATT_ERR_PROCEDURE_IN_PROGRESS   0xfe
	Procedure Already in Progress.
#define	BT_ATT_ERR_OUT_OF_RANGE   0xff
	Out of Range.
#define	BT_ATT_MAX_ATTRIBUTE_LEN   512
#define	BT_ATT_FIRST_ATTRIBUTE_HANDLE   0x0001
#define	BT_ATT_FIRST_ATTTRIBUTE_HANDLE   __DEPRECATED_MACRO BT_ATT_FIRST_ATTRIBUTE_HANDLE
#define	BT_ATT_LAST_ATTRIBUTE_HANDLE   0xffff
#define	BT_ATT_LAST_ATTTRIBUTE_HANDLE   __DEPRECATED_MACRO BT_ATT_LAST_ATTRIBUTE_HANDLE

Enumerations
enum	bt_att_chan_opt { BT_ATT_CHAN_OPT_NONE = 0x0 , BT_ATT_CHAN_OPT_UNENHANCED_ONLY = BIT(0) , BT_ATT_CHAN_OPT_ENHANCED_ONLY = BIT(1) }
	ATT channel option bit field values. More...

Functions
int	bt_eatt_connect (struct bt_conn *conn, size_t num_channels)
	Connect Enhanced ATT channels.
size_t	bt_eatt_count (struct bt_conn *conn)
	Get number of EATT channels connected.

Detailed Description

Attribute Protocol (ATT)

Macro Definition Documentation

BT_ATT_ERR_ATTRIBUTE_NOT_FOUND

#define BT_ATT_ERR_ATTRIBUTE_NOT_FOUND   0x0a

#include <include/zephyr/bluetooth/att.h>

No attribute found within the given attribute handle range.

BT_ATT_ERR_ATTRIBUTE_NOT_LONG

#define BT_ATT_ERR_ATTRIBUTE_NOT_LONG   0x0b

#include <include/zephyr/bluetooth/att.h>

The attribute cannot be read using the ATT_READ_BLOB_REQ PDU.

BT_ATT_ERR_AUTHENTICATION

#define BT_ATT_ERR_AUTHENTICATION   0x05

#include <include/zephyr/bluetooth/att.h>

The attribute requires authentication before it can be read or written.

BT_ATT_ERR_AUTHORIZATION

#define BT_ATT_ERR_AUTHORIZATION   0x08

#include <include/zephyr/bluetooth/att.h>

The attribute requires authorization before it can be read or written.

BT_ATT_ERR_CCC_IMPROPER_CONF

#define BT_ATT_ERR_CCC_IMPROPER_CONF   0xfd

#include <include/zephyr/bluetooth/att.h>

Client Characteristic Configuration Descriptor Improperly Configured.

BT_ATT_ERR_DB_OUT_OF_SYNC

#define BT_ATT_ERR_DB_OUT_OF_SYNC   0x12

#include <include/zephyr/bluetooth/att.h>

The server requests the client to rediscover the database.

BT_ATT_ERR_ENCRYPTION_KEY_SIZE

#define BT_ATT_ERR_ENCRYPTION_KEY_SIZE   0x0c

#include <include/zephyr/bluetooth/att.h>

The Encryption Key Size used for encrypting this link is too short.

BT_ATT_ERR_INSUFFICIENT_ENCRYPTION

#define BT_ATT_ERR_INSUFFICIENT_ENCRYPTION   0x0f

#include <include/zephyr/bluetooth/att.h>

The attribute requires encryption before it can be read or written.

BT_ATT_ERR_INSUFFICIENT_RESOURCES

#define BT_ATT_ERR_INSUFFICIENT_RESOURCES   0x11

#include <include/zephyr/bluetooth/att.h>

Insufficient Resources to complete the request.

BT_ATT_ERR_INVALID_ATTRIBUTE_LEN

#define BT_ATT_ERR_INVALID_ATTRIBUTE_LEN   0x0d

#include <include/zephyr/bluetooth/att.h>

The attribute value length is invalid for the operation.

BT_ATT_ERR_INVALID_HANDLE

#define BT_ATT_ERR_INVALID_HANDLE   0x01

#include <include/zephyr/bluetooth/att.h>

The attribute handle given was not valid on the server.

BT_ATT_ERR_INVALID_OFFSET

#define BT_ATT_ERR_INVALID_OFFSET   0x07

#include <include/zephyr/bluetooth/att.h>

Offset specified was past the end of the attribute.

BT_ATT_ERR_INVALID_PDU

#define BT_ATT_ERR_INVALID_PDU   0x04

#include <include/zephyr/bluetooth/att.h>

The attribute PDU was invalid.

BT_ATT_ERR_NOT_SUPPORTED

#define BT_ATT_ERR_NOT_SUPPORTED   0x06

#include <include/zephyr/bluetooth/att.h>

The ATT Server does not support the request received from the client.

BT_ATT_ERR_OUT_OF_RANGE

#define BT_ATT_ERR_OUT_OF_RANGE   0xff

#include <include/zephyr/bluetooth/att.h>

Out of Range.

BT_ATT_ERR_PREPARE_QUEUE_FULL

#define BT_ATT_ERR_PREPARE_QUEUE_FULL   0x09

#include <include/zephyr/bluetooth/att.h>

Too many prepare writes have been queued.

BT_ATT_ERR_PROCEDURE_IN_PROGRESS

#define BT_ATT_ERR_PROCEDURE_IN_PROGRESS   0xfe

#include <include/zephyr/bluetooth/att.h>

Procedure Already in Progress.

BT_ATT_ERR_READ_NOT_PERMITTED

#define BT_ATT_ERR_READ_NOT_PERMITTED   0x02

#include <include/zephyr/bluetooth/att.h>

The attribute cannot be read.

BT_ATT_ERR_SUCCESS

#define BT_ATT_ERR_SUCCESS   0x00

#include <include/zephyr/bluetooth/att.h>

The ATT operation was successful.

BT_ATT_ERR_UNLIKELY

#define BT_ATT_ERR_UNLIKELY   0x0e

#include <include/zephyr/bluetooth/att.h>

The attribute request that was requested has encountered an error that was unlikely.

The attribute request could therefore not be completed as requested

BT_ATT_ERR_UNSUPPORTED_GROUP_TYPE

#define BT_ATT_ERR_UNSUPPORTED_GROUP_TYPE   0x10

#include <include/zephyr/bluetooth/att.h>

The attribute type is not a supported grouping attribute.

The attribute type is not a supported grouping attribute as defined by a higher layer specification.

BT_ATT_ERR_VALUE_NOT_ALLOWED

#define BT_ATT_ERR_VALUE_NOT_ALLOWED   0x13

#include <include/zephyr/bluetooth/att.h>

The attribute parameter value was not allowed.

BT_ATT_ERR_WRITE_NOT_PERMITTED

#define BT_ATT_ERR_WRITE_NOT_PERMITTED   0x03

#include <include/zephyr/bluetooth/att.h>

The attribute cannot be written.

BT_ATT_ERR_WRITE_REQ_REJECTED

#define BT_ATT_ERR_WRITE_REQ_REJECTED   0xfc

#include <include/zephyr/bluetooth/att.h>

Write Request Rejected.

BT_ATT_FIRST_ATTRIBUTE_HANDLE

#define BT_ATT_FIRST_ATTRIBUTE_HANDLE   0x0001

#include <include/zephyr/bluetooth/att.h>

BT_ATT_FIRST_ATTTRIBUTE_HANDLE

#define BT_ATT_FIRST_ATTTRIBUTE_HANDLE   __DEPRECATED_MACRO BT_ATT_FIRST_ATTRIBUTE_HANDLE

#include <include/zephyr/bluetooth/att.h>

BT_ATT_LAST_ATTRIBUTE_HANDLE

#define BT_ATT_LAST_ATTRIBUTE_HANDLE   0xffff

#include <include/zephyr/bluetooth/att.h>

BT_ATT_LAST_ATTTRIBUTE_HANDLE

#define BT_ATT_LAST_ATTTRIBUTE_HANDLE   __DEPRECATED_MACRO BT_ATT_LAST_ATTRIBUTE_HANDLE

#include <include/zephyr/bluetooth/att.h>

BT_ATT_MAX_ATTRIBUTE_LEN

#define BT_ATT_MAX_ATTRIBUTE_LEN   512

#include <include/zephyr/bluetooth/att.h>

Enumeration Type Documentation

bt_att_chan_opt

enum bt_att_chan_opt

#include <include/zephyr/bluetooth/att.h>

ATT channel option bit field values.

Note

BT_ATT_CHAN_OPT_UNENHANCED_ONLY and BT_ATT_CHAN_OPT_ENHANCED_ONLY are mutually exclusive and both bits may not be set.

Enumerator
BT_ATT_CHAN_OPT_NONE	Both Enhanced and Unenhanced channels can be used
BT_ATT_CHAN_OPT_UNENHANCED_ONLY	Only Unenhanced channels will be used
BT_ATT_CHAN_OPT_ENHANCED_ONLY	Only Enhanced channels will be used

Function Documentation

bt_eatt_connect()

int bt_eatt_connect	(	struct bt_conn *	conn,
		size_t	num_channels
	)

#include <include/zephyr/bluetooth/att.h>

Connect Enhanced ATT channels.

Sends a series of Credit Based Connection Requests to connect num_channels Enhanced ATT channels. The peer may have limited resources and fewer channels may be created.

Parameters

conn	The connection to send the request on
num_channels	The number of Enhanced ATT beares to request. Must be in the range 1 - CONFIG_BT_EATT_MAX , inclusive.

Returns

0 in case of success or negative value in case of error.

Return values

-EINVAL	if num_channels is not in the allowed range or conn is NULL.
-ENOMEM	if less than num_channels are allocated.
0	in case of success

bt_eatt_count()

size_t bt_eatt_count

(

struct bt_conn *

conn

)

#include <include/zephyr/bluetooth/att.h>

Get number of EATT channels connected.

Parameters

conn	The connection to get the number of EATT channels for.

Returns

The number of EATT channels connected. Returns 0 if conn is NULL or not connected.