reg property

Macros
#define	DT_NUM_REGS(node_id)   DT_CAT(node_id, _REG_NUM)
	Get the number of register blocks in the reg property.
#define	DT_REG_HAS_IDX(node_id, idx)    IS_ENABLED(DT_CAT4(node_id, _REG_IDX_, idx, _EXISTS))
	Is idx a valid register block index?
#define	DT_REG_ADDR_BY_IDX(node_id, idx)    DT_CAT4(node_id, _REG_IDX_, idx, _VAL_ADDRESS)
	Get the base address of the register block at index idx.
#define	DT_REG_SIZE_BY_IDX(node_id, idx)    DT_CAT4(node_id, _REG_IDX_, idx, _VAL_SIZE)
	Get the size of the register block at index idx.
#define	DT_REG_ADDR(node_id)   DT_REG_ADDR_BY_IDX(node_id, 0)
	Get a node's (only) register block address.
#define	DT_REG_ADDR_U64(node_id)   DT_U64_C(DT_REG_ADDR(node_id))
	64-bit version of DT_REG_ADDR()
#define	DT_REG_SIZE(node_id)   DT_REG_SIZE_BY_IDX(node_id, 0)
	Get a node's (only) register block size.
#define	DT_REG_ADDR_BY_NAME(node_id, name)    DT_CAT4(node_id, _REG_NAME_, name, _VAL_ADDRESS)
	Get a register block's base address by name.
#define	DT_REG_ADDR_BY_NAME_U64(node_id, name)    DT_U64_C(DT_REG_ADDR_BY_NAME(node_id, name))
	64-bit version of DT_REG_ADDR_BY_NAME()
#define	DT_REG_SIZE_BY_NAME(node_id, name)    DT_CAT4(node_id, _REG_NAME_, name, _VAL_SIZE)
	Get a register block's size by name.

Detailed Description

Macro Definition Documentation

DT_NUM_REGS

#define DT_NUM_REGS

(

node_id

)

DT_CAT(node_id, _REG_NUM)

#include <include/zephyr/devicetree.h>

Get the number of register blocks in the reg property.

Use this instead of DT_PROP_LEN(node_id, reg).

Parameters

node_id

node identifier

Returns

Number of register blocks in the node's "reg" property.

DT_REG_ADDR

#define DT_REG_ADDR

(

node_id

)

DT_REG_ADDR_BY_IDX(node_id, 0)

#include <include/zephyr/devicetree.h>

Get a node's (only) register block address.

Equivalent to DT_REG_ADDR_BY_IDX(node_id, 0).

Parameters

node_id

node identifier

Returns

node's register block address

DT_REG_ADDR_BY_IDX

#define DT_REG_ADDR_BY_IDX	(		node_id,
			idx
	)		DT_CAT4(node_id, _REG_IDX_, idx, _VAL_ADDRESS)

#include <include/zephyr/devicetree.h>

Get the base address of the register block at index idx.

Parameters

node_id	node identifier
idx	index of the register whose address to return

Returns

address of the idx-th register block

DT_REG_ADDR_BY_NAME

#define DT_REG_ADDR_BY_NAME	(		node_id,
			name
	)		DT_CAT4(node_id, _REG_NAME_, name, _VAL_ADDRESS)

#include <include/zephyr/devicetree.h>

Get a register block's base address by name.

Parameters

node_id	node identifier
name	lowercase-and-underscores register specifier name

Returns

address of the register block specified by name

DT_REG_ADDR_BY_NAME_U64

#define DT_REG_ADDR_BY_NAME_U64	(		node_id,
			name
	)		DT_U64_C(DT_REG_ADDR_BY_NAME(node_id, name))

#include <include/zephyr/devicetree.h>

64-bit version of DT_REG_ADDR_BY_NAME()

This macro version adds the appropriate suffix for 64-bit unsigned integer literals. Note that this macro is equivalent to DT_REG_ADDR_BY_NAME() in linker/ASM context.

Parameters

node_id	node identifier
name	lowercase-and-underscores register specifier name

Returns

address of the register block specified by name

DT_REG_ADDR_U64

#define DT_REG_ADDR_U64

(

node_id

)

DT_U64_C(DT_REG_ADDR(node_id))

#include <include/zephyr/devicetree.h>

64-bit version of DT_REG_ADDR()

This macro version adds the appropriate suffix for 64-bit unsigned integer literals. Note that this macro is equivalent to DT_REG_ADDR() in linker/ASM context.

Parameters

node_id

node identifier

Returns

node's register block address

DT_REG_HAS_IDX

#define DT_REG_HAS_IDX	(		node_id,
			idx
	)		IS_ENABLED(DT_CAT4(node_id, _REG_IDX_, idx, _EXISTS))

#include <include/zephyr/devicetree.h>

Is idx a valid register block index?

If this returns 1, then DT_REG_ADDR_BY_IDX(node_id, idx) or DT_REG_SIZE_BY_IDX(node_id, idx) are valid. If it returns 0, it is an error to use those macros with index idx.

Parameters

node_id	node identifier
idx	index to check

Returns

1 if idx is a valid register block index, 0 otherwise.

DT_REG_SIZE

#define DT_REG_SIZE

(

node_id

)

DT_REG_SIZE_BY_IDX(node_id, 0)

#include <include/zephyr/devicetree.h>

Get a node's (only) register block size.

Equivalent to DT_REG_SIZE_BY_IDX(node_id, 0).

Parameters

node_id

node identifier

Returns

node's only register block's size

DT_REG_SIZE_BY_IDX

#define DT_REG_SIZE_BY_IDX	(		node_id,
			idx
	)		DT_CAT4(node_id, _REG_IDX_, idx, _VAL_SIZE)

#include <include/zephyr/devicetree.h>

Get the size of the register block at index idx.

This is the size of an individual register block, not the total number of register blocks in the property; use DT_NUM_REGS() for that.

Parameters

node_id	node identifier
idx	index of the register whose size to return

Returns

size of the idx-th register block

DT_REG_SIZE_BY_NAME

#define DT_REG_SIZE_BY_NAME	(		node_id,
			name
	)		DT_CAT4(node_id, _REG_NAME_, name, _VAL_SIZE)

#include <include/zephyr/devicetree.h>

Get a register block's size by name.

Parameters

node_id	node identifier
name	lowercase-and-underscores register specifier name

Returns

size of the register block specified by name