Ethernet PHY Interface

Ethernet PHY Interface. More...

Data Structures
struct	phy_link_state
	Link state. More...

Macros
#define	PHY_LINK_IS_FULL_DUPLEX(x)   (x & (BIT(1) | BIT(3) | BIT(5) | BIT(6) | BIT(7)))
	Check if phy link is full duplex.
#define	PHY_LINK_IS_SPEED_1000M(x)   (x & (BIT(4) | BIT(5)))
	Check if phy link speed is 1 Gbit/sec.
#define	PHY_LINK_IS_SPEED_100M(x)   (x & (BIT(2) | BIT(3)))
	Check if phy link speed is 100 Mbit/sec.

Typedefs
typedef void(*	phy_callback_t) (const struct device *dev, struct phy_link_state *state, void *user_data)
	Define the callback function signature for phy_link_callback_set() function.

Enumerations
enum	phy_link_speed {   LINK_HALF_10BASE_T = BIT(0) , LINK_FULL_10BASE_T = BIT(1) , LINK_HALF_100BASE_T = BIT(2) , LINK_FULL_100BASE_T = BIT(3) ,   LINK_HALF_1000BASE_T = BIT(4) , LINK_FULL_1000BASE_T = BIT(5) , LINK_FULL_2500BASE_T = BIT(6) , LINK_FULL_5000BASE_T = BIT(7) }
	Ethernet link speeds. More...

Functions
static int	phy_configure_link (const struct device *dev, enum phy_link_speed speeds)
	Configure PHY link.
static int	phy_get_link_state (const struct device *dev, struct phy_link_state *state)
	Get PHY link state.
static int	phy_link_callback_set (const struct device *dev, phy_callback_t callback, void *user_data)
	Set link state change callback.
static int	phy_read (const struct device *dev, uint16_t reg_addr, uint32_t *value)
	Read PHY registers.
static int	phy_write (const struct device *dev, uint16_t reg_addr, uint32_t value)
	Write PHY register.

Detailed Description

Ethernet PHY Interface.

Since

2.7

Version

0.8.0

Macro Definition Documentation

PHY_LINK_IS_FULL_DUPLEX

#define PHY_LINK_IS_FULL_DUPLEX

(

x

)

(x & (BIT(1) | BIT(3) | BIT(5) | BIT(6) | BIT(7)))

#include <include/zephyr/net/phy.h>

Check if phy link is full duplex.

Parameters

x	Link capabilities

Returns

True if link is full duplex, false if not.

PHY_LINK_IS_SPEED_1000M

#define PHY_LINK_IS_SPEED_1000M

(

x

)

(x & (BIT(4) | BIT(5)))

#include <include/zephyr/net/phy.h>

Check if phy link speed is 1 Gbit/sec.

Parameters

x	Link capabilities

Returns

True if link is 1 Gbit/sec, false if not.

PHY_LINK_IS_SPEED_100M

#define PHY_LINK_IS_SPEED_100M

(

x

)

(x & (BIT(2) | BIT(3)))

#include <include/zephyr/net/phy.h>

Check if phy link speed is 100 Mbit/sec.

Parameters

x	Link capabilities

Returns

True if link is 1 Mbit/sec, false if not.

Typedef Documentation

phy_callback_t

phy_callback_t

#include <include/zephyr/net/phy.h>

Define the callback function signature for phy_link_callback_set() function.

Parameters

dev	PHY device structure
state	Pointer to link_state structure.
user_data	Pointer to data specified by user

Enumeration Type Documentation

phy_link_speed

enum phy_link_speed

#include <include/zephyr/net/phy.h>

Ethernet link speeds.

Enumerator
LINK_HALF_10BASE_T	10Base-T Half-Duplex
LINK_FULL_10BASE_T	10Base-T Full-Duplex
LINK_HALF_100BASE_T	100Base-T Half-Duplex
LINK_FULL_100BASE_T	100Base-T Full-Duplex
LINK_HALF_1000BASE_T	1000Base-T Half-Duplex
LINK_FULL_1000BASE_T	1000Base-T Full-Duplex
LINK_FULL_2500BASE_T	2.5GBase-T Full-Duplex
LINK_FULL_5000BASE_T	5GBase-T Full-Duplex

Function Documentation

phy_configure_link()

static int phy_configure_link ( const struct device *  dev, enum phy_link_speed  speeds  )

inlinestatic

#include <include/zephyr/net/phy.h>

Configure PHY link.

This route configures the advertised link speeds.

Parameters

[in]	dev	PHY device structure
	speeds	OR'd link speeds to be advertised by the PHY

Return values

0	If successful.
-EIO	If communication with PHY failed.
-ENOTSUP	If not supported.

phy_get_link_state()

static int phy_get_link_state ( const struct device *  dev, struct phy_link_state *  state  )

inlinestatic

#include <include/zephyr/net/phy.h>

Get PHY link state.

Returns the current state of the PHY link. This can be used by to determine when a link is up and the negotiated link speed.

Parameters

[in]	dev	PHY device structure
	state	Pointer to receive PHY state

Return values

0	If successful.
-EIO	If communication with PHY failed.

phy_link_callback_set()

static int phy_link_callback_set ( const struct device *  dev, phy_callback_t  callback, void *  user_data  )

inlinestatic

#include <include/zephyr/net/phy.h>

Set link state change callback.

Sets a callback that is invoked when link state changes. This is the preferred method for ethernet drivers to be notified of the PHY link state change.

Parameters

[in]	dev	PHY device structure
	callback	Callback handler
	user_data	Pointer to data specified by user.

Return values

0	If successful.
-ENOTSUP	If not supported.

phy_read()

static int phy_read ( const struct device *  dev, uint16_t  reg_addr, uint32_t *  value  )

inlinestatic

#include <include/zephyr/net/phy.h>

Read PHY registers.

This routine provides a generic interface to read from a PHY register.

Parameters

[in]	dev	PHY device structure
[in]	reg_addr	Register address
	value	Pointer to receive read value

Return values

0	If successful.
-EIO	If communication with PHY failed.

phy_write()

static int phy_write ( const struct device *  dev, uint16_t  reg_addr, uint32_t  value  )

inlinestatic

#include <include/zephyr/net/phy.h>

Write PHY register.

This routine provides a generic interface to write to a PHY register.

Parameters

[in]	dev	PHY device structure
[in]	reg_addr	Register address
[in]	value	Value to write

Return values

0	If successful.
-EIO	If communication with PHY failed.