sensing_sensor_config Struct Reference

Sensing subsystem sensor configure, including interval, sensitivity, latency. More...

#include <sensing.h>

Data Fields
enum sensing_sensor_attribute	attri
	Attribute of the sensor configuration.
int8_t	data_field
	SENSING_SENSITIVITY_INDEX_ALL
union {
uint32_t   interval
	Interval between two sensor samples in microseconds (us). More...
uint32_t   sensitivity
	Sensitivity threshold for reporting new data. More...
uint64_t   latency
	Maximum duration for batching sensor samples before reporting in microseconds (us). More...
};

Detailed Description

Sensing subsystem sensor configure, including interval, sensitivity, latency.

Field Documentation

[union]

union { ... } sensing_sensor_config

attri

enum sensing_sensor_attribute sensing_sensor_config::attri

Attribute of the sensor configuration.

data_field

int8_t sensing_sensor_config::data_field

SENSING_SENSITIVITY_INDEX_ALL

Data field of the sensor configuration.

interval

uint32_t sensing_sensor_config::interval

Interval between two sensor samples in microseconds (us).

latency

uint64_t sensing_sensor_config::latency

Maximum duration for batching sensor samples before reporting in microseconds (us).

This defines how long sensor samples can be accumulated before they must be reported.

sensitivity

uint32_t sensing_sensor_config::sensitivity

Sensitivity threshold for reporting new data.

A new sensor sample is reported only if the difference between it and the previous sample exceeds this sensitivity value.

---

The documentation for this struct was generated from the following file:

• include/zephyr/sensing/sensing.h