Data generation

This section groups all the functions concerning data generation. More...

Functions
int32_t	stk8ba58_all_sources_get (const struct i2c_dt_spec *i2c, stk8ba58_all_sources_t *val)
	Read all the interrupt/status flag of the device.
int32_t	stk8ba58_xl_range_set (const struct i2c_dt_spec *i2c, stk8ba58_range_t val)
	Accelerometer range selection.
int32_t	stk8ba58_xl_range_get (const struct i2c_dt_spec *i2c, stk8ba58_range_t *val)
	Accelerometer range selection.
int32_t	stk8ba58_xl_bandwidth_set (const struct i2c_dt_spec *i2c, stk8ba58_bw_t val, stk8ba58_ds_t sel)
	Accelerometer bandwidth selection.
int32_t	stk8ba58_xl_bandwidth_get (const struct i2c_dt_spec *i2c, stk8ba58_bw_t *val, stk8ba58_ds_t *sel)
	Accelerometer bandwidth selection.
int32_t	stk8ba58_xl_power_mode_set (const struct i2c_dt_spec *i2c, stk8ba58_sleepdur_t val, stk8ba58_pm_t sel)
	Accelerometer power mode selection.
int32_t	stk8ba58_xl_power_mode_get (const struct i2c_dt_spec *i2c, stk8ba58_sleepdur_t *val, stk8ba58_pm_t *sel)
	Accelerometer bandwidth selection.

Detailed Description

This section groups all the functions concerning data generation.

Function Documentation

stk8ba58_all_sources_get()

int32_t stk8ba58_all_sources_get	(	const struct i2c_dt_spec *	i2c,
		stk8ba58_all_sources_t *	val
	)

#include <drivers/sensor/sensortek/stk8ba58/stk8ba58_reg.c>

Read all the interrupt/status flag of the device.

[get]

Parameters

i2c	Read / write interface definitions.(ptr)
val	Get INTSTS1, INTSTS2, EVENTINFO1.(ptr)

Return values

Interface

status (MANDATORY: return 0 -> no Error).

stk8ba58_xl_bandwidth_get()

int32_t stk8ba58_xl_bandwidth_get	(	const struct i2c_dt_spec *	i2c,
		stk8ba58_bw_t *	val,
		stk8ba58_ds_t *	sel
	)

#include <drivers/sensor/sensortek/stk8ba58/stk8ba58_reg.c>

Accelerometer bandwidth selection.

[get]

Parameters

i2c	Read / write interface definitions.(ptr)
val	Get the values of bw in reg BWSEL.(ptr)
sel	Get the values of data-sel in reg DATASETUP.(ptr)

Return values

Interface

status (MANDATORY: return 0 -> no Error).

stk8ba58_xl_bandwidth_set()

int32_t stk8ba58_xl_bandwidth_set	(	const struct i2c_dt_spec *	i2c,
		stk8ba58_bw_t	val,
		stk8ba58_ds_t	sel
	)

#include <drivers/sensor/sensortek/stk8ba58/stk8ba58_reg.c>

Accelerometer bandwidth selection.

[set]

Parameters

i2c	Read / write interface definitions.(ptr)
val	Change the values of bw in reg BWSEL.
sel	Change the values of data-sel in reg DATASETUP.

Return values

Interface

status (MANDATORY: return 0 -> no Error).

stk8ba58_xl_power_mode_get()

int32_t stk8ba58_xl_power_mode_get	(	const struct i2c_dt_spec *	i2c,
		stk8ba58_sleepdur_t *	val,
		stk8ba58_pm_t *	sel
	)

#include <drivers/sensor/sensortek/stk8ba58/stk8ba58_reg.c>

Accelerometer bandwidth selection.

[get]

Parameters

i2c	Read / write interface definitions.(ptr)
val	Get the values of sleep-dur in reg POWMODE.(ptr)
sel	Get the values of lowpower / suspend in reg POWMODE.(ptr)

Return values

Interface

status (MANDATORY: return 0 -> no Error).

stk8ba58_xl_power_mode_set()

int32_t stk8ba58_xl_power_mode_set	(	const struct i2c_dt_spec *	i2c,
		stk8ba58_sleepdur_t	val,
		stk8ba58_pm_t	sel
	)

#include <drivers/sensor/sensortek/stk8ba58/stk8ba58_reg.c>

Accelerometer power mode selection.

[set]

Parameters

i2c	Read / write interface definitions.(ptr)
val	Change the values of sleep-dur in reg POWMODE.
sel	Change the values of lowpower / suspend in reg POWMODE.

Return values

Interface

status (MANDATORY: return 0 -> no Error).

stk8ba58_xl_range_get()

int32_t stk8ba58_xl_range_get	(	const struct i2c_dt_spec *	i2c,
		stk8ba58_range_t *	val
	)

#include <drivers/sensor/sensortek/stk8ba58/stk8ba58_reg.c>

Accelerometer range selection.

[get]

Parameters

i2c	Read / write interface definitions.(ptr)
val	Get the values of range in reg RANGESEL.(ptr)

Return values

Interface

status (MANDATORY: return 0 -> no Error).

stk8ba58_xl_range_set()

int32_t stk8ba58_xl_range_set	(	const struct i2c_dt_spec *	i2c,
		stk8ba58_range_t	val
	)

#include <drivers/sensor/sensortek/stk8ba58/stk8ba58_reg.c>

Accelerometer range selection.

[set]

Parameters

i2c	Read / write interface definitions.(ptr)
val	Change the values of range in reg RANGESEL.

Return values

Interface

status (MANDATORY: return 0 -> no Error).