digilent-pmod-header.h File Reference

Digilent Pmod header pin constants. More...

Go to the source code of this file.

Macros
#define	PMOD_1_IO1   0
	Pin 1: GPIO in-/output 0.
#define	PMOD_1_IO2   1
	Pin 2: GPIO in-/output 1 (PWM).
#define	PMOD_1_IO3   2
	Pin 3: GPIO in-/output 2.
#define	PMOD_1_IO4   3
	Pin 4: GPIO in-/output 3.
#define	PMOD_1A_IO5   4
	Pin 7: GPIO in-/output 4.
#define	PMOD_1A_IO6   5
	Pin 8: GPIO in-/output 5 (PWM).
#define	PMOD_1A_IO7   6
	Pin 9: GPIO in-/output 6.
#define	PMOD_1A_IO8   7
	Pin 10: GPIO in-/output 7.
#define	PMOD_2_CS   0
	Pin 1: SPI CS.
#define	PMOD_2_MOSI   1
	Pin 2: SPI MOSI.
#define	PMOD_2_MISO   2
	Pin 3: SPI MISO.
#define	PMOD_2_SCK   3
	Pin 4: SPI SCK.
#define	PMOD_2A_INT   4
	Pin 7: SPI device interrupt.
#define	PMOD_2A_RESET   5
	Pin 8: SPI device reset.
#define	PMOD_2A_CS2   6
	Pin 9: SPI device chip select 2.
#define	PMOD_2A_CS3   7
	Pin 10: SPI device chip select 3.
#define	PMOD_2A_IO5   4
	Pin 7: GPIO in-/output 4 (INT).
#define	PMOD_2A_IO6   5
	Pin 8: GPIO in-/output 5 (RESET).
#define	PMOD_2A_IO7   6
	Pin 9: GPIO in-/output 6 (CS2).
#define	PMOD_2A_IO8   7
	Pin 10: GPIO in-/output 7 (CS3).
#define	PMOD_3_IO1   0
	Pin 1: GPIO in-/output 0 (CTS).
#define	PMOD_3_CTS   0
	Pin 1: UART host is clear to send.
#define	PMOD_3_TXD   1
	Pin 2: UART host transmit data.
#define	PMOD_3_RXD   2
	Pin 3: UART host receive data.
#define	PMOD_3_RTS   3
	Pin 4: UART host request to send.
#define	PMOD_3_IO4   3
	Pin 4: GPIO in-/output 3 (RTS).
#define	PMOD_3A_INT   4
	Pin 7: UART device interrupt.
#define	PMOD_3A_RESET   5
	Pin 8: UART device reset.
#define	PMOD_3A_IO5   4
	Pin 7: GPIO in-/output 4 (INT).
#define	PMOD_3A_IO6   5
	Pin 8: GPIO in-/output 5 (RESET).
#define	PMOD_3A_IO7   6
	Pin 9: GPIO in-/output 6.
#define	PMOD_3A_IO8   7
	Pin 10: GPIO in-/output 7.
#define	PMOD_4_DIR   0
	Pin 1: H-Bridge motor direction.
#define	PMOD_4_EN   1
	Pin 2: H-Bridge motor enable (PWM).
#define	PMOD_4_SA   2
	Pin 3: H-Bridge motor feedback sense A.
#define	PMOD_4_SB   3
	Pin 4: H-Bridge motor feedback sense B.
#define	PMOD_5_DIR1   0
	Pin 1: Dual H-Bridge motor/phase 1 direction.
#define	PMOD_5_EN1   1
	Pin 2: Dual H-Bridge motor/phase 1 enable.
#define	PMOD_5_DIR2   2
	Pin 3: Dual H-Bridge motor/phase 1 direction.
#define	PMOD_5_EN2   3
	Pin 4: Dual H-Bridge motor/phase 1 enable.
#define	PMOD_5A_DIR1   0
	Pin 1: Dual H-Bridge motor 1 direction.
#define	PMOD_5A_EN1   1
	Pin 2: Dual H-Bridge motor 1 enable (PWM).
#define	PMOD_5A_SA1   2
	Pin 3: Dual H-Bridge motor 1 feedback sense A.
#define	PMOD_5A_SB1   3
	Pin 4: Dual H-Bridge motor 1 feedback sense B.
#define	PMOD_5A_DIR2   4
	Pin 7: Dual H-Bridge motor 2 direction.
#define	PMOD_5A_EN2   5
	Pin 8: Dual H-Bridge motor 2 enable (PWM).
#define	PMOD_5A_SA2   6
	Pin 9: Dual H-Bridge motor 2 feedback sense A.
#define	PMOD_5A_SB2   7
	Pin 10: Dual H-Bridge motor 2 feedback sense B.
#define	PMOD_6_IO1   0
	Pin 7: GPIO in-/output 0 (INT).
#define	PMOD_6_IO2   1
	Pin 8: GPIO in-/output 1 (RESET).
#define	PMOD_6_INT   0
	Pin 7: I2C device interrupt.
#define	PMOD_6_RESET   1
	Pin 8: I2C device reset.
#define	PMOD_6_SCL   2
	Pin 3: I2C serial clock.
#define	PMOD_6_SDA   3
	Pin 4: I2C serial data.
#define	PMOD_6A_IO1   0
	Pin 7: GPIO in-/output 0 (INT).
#define	PMOD_6A_IO2   1
	Pin 8: GPIO in-/output 1 (RESET).
#define	PMOD_6A_INT   0
	Pin 7: I2C device interrupt.
#define	PMOD_6A_RESET   1
	Pin 8: I2C device reset.
#define	PMOD_6A_SCL   2
	Pin 3: I2C serial clock.
#define	PMOD_6A_SDA   3
	Pin 4: I2C serial data.
#define	PMOD_6A_IO5   4
	Pin 7: GPIO in-/output 4.
#define	PMOD_6A_IO6   5
	Pin 8: GPIO in-/output 5.
#define	PMOD_6A_IO7   6
	Pin 9: GPIO in-/output 6.
#define	PMOD_6A_IO8   7
	Pin 10: GPIO in-/output 7.
#define	PMOD_7_LRCLK   0
	Pin 1: I2S left/right channel select.
#define	PMOD_7_DAC   1
	Pin 2: I2S output data to DAC.
#define	PMOD_7_ADC   2
	Pin 3: I2S input data from ADC.
#define	PMOD_7_BCLK   3
	Pin 4: I2S serial bit clock.
#define	PMOD_7_MCLK   6
	Pin 9: I2S optional master clock.
#define	PMOD_7_SHDN   6
	Pin 9: I2S optional shutdown.
#define	PMOD_7_IO5   4
	Pin 7: GPIO in-/output 4.
#define	PMOD_7_IO6   5
	Pin 8: GPIO in-/output 5.
#define	PMOD_7_IO7   6
	Pin 9: GPIO in-/output 6 (MCLK).
#define	PMOD_7_IO8   7
	Pin 10: GPIO in-/output 7 (SHDN).

Detailed Description

Digilent Pmod header pin constants.