Isochronous channels (ISO) More...

Data Structures
struct	bt_iso_chan
	ISO Channel structure. More...

struct	bt_iso_chan_io_qos
	ISO Channel IO QoS structure. More...

struct	bt_iso_chan_qos
	ISO Channel QoS structure. More...

struct	bt_iso_chan_path
	ISO Channel Data Path structure. More...

struct	bt_iso_recv_info
	ISO Meta Data structure for received ISO packets. More...

struct	bt_iso_tx_info
	ISO Meta Data structure for transmitted ISO packets. More...

struct	bt_iso_cig_param
	Connected Isochronous Group (CIG) parameters. More...

struct	bt_iso_connect_param
	ISO connection parameters structure. More...

struct	bt_iso_big_create_param
	Broadcast Isochronous Group (BIG) creation parameters. More...

struct	bt_iso_big_sync_param
	Broadcast Isochronous Group (BIG) Sync Parameters. More...

struct	bt_iso_biginfo
	Broadcast Isochronous Group (BIG) information. More...

struct	bt_iso_chan_ops
	ISO Channel operations structure. More...

struct	bt_iso_accept_info
	ISO Accept Info Structure. More...

struct	bt_iso_server
	ISO Server structure. More...

struct	bt_iso_unicast_tx_info
	ISO Unicast TX Info Structure. More...

struct	bt_iso_unicast_info
	ISO Unicast Info Structure. More...

struct	bt_iso_broadcaster_info
	ISO Broadcaster Info Structure. More...

struct	bt_iso_sync_receiver_info
	ISO Synchronized Receiver Info Structure. More...

struct	bt_iso_info
	ISO channel Info Structure. More...

Macros
#define	BT_ISO_CHAN_SEND_RESERVE BT_BUF_ISO_SIZE(0)
	Headroom needed for outgoing ISO SDUs.

#define	BT_ISO_SDU_BUF_SIZE(mtu) BT_BUF_ISO_SIZE(mtu)
	Helper to calculate needed buffer size for ISO SDUs.

#define	BT_ISO_DATA_PATH_HCI 0x00
	Value to set the ISO data path over HCi.

#define	BT_ISO_SDU_INTERVAL_MIN 0x0000FFU
	Minimum interval value in microseconds.

#define	BT_ISO_SDU_INTERVAL_MAX 0x0FFFFFU
	Maximum interval value in microseconds.

#define	BT_ISO_ISO_INTERVAL_MIN 0x0004U
	Minimum ISO interval (N * 1.25 ms)

#define	BT_ISO_ISO_INTERVAL_MAX 0x0C80U
	Maximum ISO interval (N * 1.25 ms)

#define	BT_ISO_LATENCY_MIN 0x0005
	Minimum latency value in milliseconds.

#define	BT_ISO_LATENCY_MAX 0x0FA0
	Maximum latency value in milliseconds.

#define	BT_ISO_PACKING_SEQUENTIAL 0x00
	Packets will be sent sequentially between the channels in the group.

#define	BT_ISO_PACKING_INTERLEAVED 0x01
	Packets will be sent interleaved between the channels in the group.

#define	BT_ISO_FRAMING_UNFRAMED 0x00
	Packets may be framed or unframed.

#define	BT_ISO_FRAMING_FRAMED 0x01
	Packets are always framed.

#define	BT_ISO_MAX_GROUP_ISO_COUNT 0x1F
	Maximum number of isochronous channels in a single group.

#define	BT_ISO_MIN_SDU 0x0001
	Minimum SDU size.

#define	BT_ISO_MAX_SDU 0x0FFF
	Maximum SDU size.

#define	BT_ISO_CONNECTED_PDU_MIN 0x0000U
	Minimum PDU size.

#define	BT_ISO_BROADCAST_PDU_MIN 0x0001U
	Minimum PDU size.

#define	BT_ISO_PDU_MAX 0x00FBU
	Maximum PDU size.

#define	BT_ISO_BN_MIN 0x01U
	Minimum burst number.

#define	BT_ISO_BN_MAX 0x0FU
	Maximum burst number.

#define	BT_ISO_FT_MIN 0x01U
	Minimum flush timeout.

#define	BT_ISO_FT_MAX 0xFFU
	Maximum flush timeout.

#define	BT_ISO_NSE_MIN 0x01U
	Minimum number of subevents.

#define	BT_ISO_NSE_MAX 0x1FU
	Maximum number of subevents.

#define	BT_ISO_SYNC_TIMEOUT_MIN 0x000A
	Minimum BIG sync timeout value (N * 10 ms)

#define	BT_ISO_SYNC_TIMEOUT_MAX 0x4000
	Maximum BIG sync timeout value (N * 10 ms)

#define	BT_ISO_SYNC_MSE_ANY 0x00
	Controller controlled maximum subevent count value.

#define	BT_ISO_SYNC_MSE_MIN 0x01
	Minimum BIG sync maximum subevent count value.

#define	BT_ISO_SYNC_MSE_MAX 0x1F
	Maximum BIG sync maximum subevent count value.

#define	BT_ISO_CONNECTED_RTN_MAX 0xFF
	Maximum connected ISO retransmission value.

#define	BT_ISO_BROADCAST_RTN_MAX 0x1E
	Maximum broadcast ISO retransmission value.

#define	BT_ISO_BROADCAST_CODE_SIZE 16
	Broadcast code size.

#define	BT_ISO_BIS_INDEX_MIN 0x01
	Lowest BIS index.

#define	BT_ISO_BIS_INDEX_MAX 0x1F
	Highest BIS index.

#define	BT_ISO_IRC_MIN 0x01U
	Minimum Immediate Repetition Count.

#define	BT_ISO_IRC_MAX 0x0FU
	Maximum Immediate Repetition Count.

#define	BT_ISO_PTO_MIN 0x00U
	Minimum pre-transmission offset.

#define	BT_ISO_PTO_MAX 0x0FU
	Maximum pre-transmission offset.

Enumerations
enum	bt_iso_state { BT_ISO_STATE_DISCONNECTED , BT_ISO_STATE_ENCRYPT_PENDING , BT_ISO_STATE_CONNECTING , BT_ISO_STATE_CONNECTED , BT_ISO_STATE_DISCONNECTING }
	Life-span states of ISO channel. More...

enum	bt_iso_chan_type { BT_ISO_CHAN_TYPE_NONE , BT_ISO_CHAN_TYPE_CONNECTED , BT_ISO_CHAN_TYPE_BROADCASTER , BT_ISO_CHAN_TYPE_SYNC_RECEIVER }
	ISO Channel Type. More...

enum	{ BT_ISO_FLAGS_VALID = BIT(0) , BT_ISO_FLAGS_ERROR = BIT(1) , BT_ISO_FLAGS_LOST = BIT(2) , BT_ISO_FLAGS_TS = BIT(3) }
	ISO packet status flag bits. More...

Functions
int	bt_iso_server_register (struct bt_iso_server *server)
	Register ISO server.

int	bt_iso_server_unregister (struct bt_iso_server *server)
	Unregister ISO server.

int	bt_iso_cig_create (const struct bt_iso_cig_param param, struct bt_iso_cig *out_cig)
	Creates a CIG as a central.

int	bt_iso_cig_reconfigure (struct bt_iso_cig cig, const struct bt_iso_cig_param param)
	Reconfigure a CIG as a central.

int	bt_iso_cig_terminate (struct bt_iso_cig *cig)
	Terminates a CIG as a central.

int	bt_iso_chan_connect (const struct bt_iso_connect_param *param, size_t count)
	Connect ISO channels on ACL connections.

int	bt_iso_chan_disconnect (struct bt_iso_chan *chan)
	Disconnect connected ISO channel.

int	bt_iso_chan_send (struct bt_iso_chan chan, struct net_buf buf, uint16_t seq_num)
	Send data to ISO channel without timestamp.

int	bt_iso_chan_send_ts (struct bt_iso_chan chan, struct net_buf buf, uint16_t seq_num, uint32_t ts)
	Send data to ISO channel with timestamp.

int	bt_iso_chan_get_info (const struct bt_iso_chan chan, struct bt_iso_info info)
	Get ISO channel info.

int	bt_iso_chan_get_tx_sync (const struct bt_iso_chan chan, struct bt_iso_tx_info info)
	Get ISO transmission timing info.

int	bt_iso_big_create (struct bt_le_ext_adv padv, struct bt_iso_big_create_param param, struct bt_iso_big **out_big)
	Creates a BIG as a broadcaster.

int	bt_iso_big_terminate (struct bt_iso_big *big)
	Terminates a BIG as a broadcaster or receiver.

int	bt_iso_big_sync (struct bt_le_per_adv_sync sync, struct bt_iso_big_sync_param param, struct bt_iso_big **out_big)
	Creates a BIG as a receiver.

Detailed Description

Isochronous channels (ISO)

Since: 2.3

Version: 0.8.0

Macro Definition Documentation

◆ BT_ISO_BIS_INDEX_MAX

#define BT_ISO_BIS_INDEX_MAX 0x1F

#include <include/zephyr/bluetooth/iso.h>

Highest BIS index.

◆ BT_ISO_BIS_INDEX_MIN

#define BT_ISO_BIS_INDEX_MIN 0x01

#include <include/zephyr/bluetooth/iso.h>

Lowest BIS index.

◆ BT_ISO_BN_MAX

#define BT_ISO_BN_MAX 0x0FU

#include <include/zephyr/bluetooth/iso.h>

Maximum burst number.

◆ BT_ISO_BN_MIN

#define BT_ISO_BN_MIN 0x01U

#include <include/zephyr/bluetooth/iso.h>

Minimum burst number.

◆ BT_ISO_BROADCAST_CODE_SIZE

#define BT_ISO_BROADCAST_CODE_SIZE 16

#include <include/zephyr/bluetooth/iso.h>

Broadcast code size.

◆ BT_ISO_BROADCAST_PDU_MIN

#define BT_ISO_BROADCAST_PDU_MIN 0x0001U

#include <include/zephyr/bluetooth/iso.h>

Minimum PDU size.

◆ BT_ISO_BROADCAST_RTN_MAX

#define BT_ISO_BROADCAST_RTN_MAX 0x1E

#include <include/zephyr/bluetooth/iso.h>

Maximum broadcast ISO retransmission value.

◆ BT_ISO_CHAN_SEND_RESERVE

#define BT_ISO_CHAN_SEND_RESERVE BT_BUF_ISO_SIZE(0)

#include <include/zephyr/bluetooth/iso.h>

Headroom needed for outgoing ISO SDUs.

◆ BT_ISO_CONNECTED_PDU_MIN

#define BT_ISO_CONNECTED_PDU_MIN 0x0000U

#include <include/zephyr/bluetooth/iso.h>

Minimum PDU size.

◆ BT_ISO_CONNECTED_RTN_MAX

#define BT_ISO_CONNECTED_RTN_MAX 0xFF

#include <include/zephyr/bluetooth/iso.h>

Maximum connected ISO retransmission value.

◆ BT_ISO_DATA_PATH_HCI

#define BT_ISO_DATA_PATH_HCI 0x00

#include <include/zephyr/bluetooth/iso.h>

Value to set the ISO data path over HCi.

◆ BT_ISO_FRAMING_FRAMED

#define BT_ISO_FRAMING_FRAMED 0x01

#include <include/zephyr/bluetooth/iso.h>

Packets are always framed.

◆ BT_ISO_FRAMING_UNFRAMED

#define BT_ISO_FRAMING_UNFRAMED 0x00

#include <include/zephyr/bluetooth/iso.h>

Packets may be framed or unframed.

◆ BT_ISO_FT_MAX

#define BT_ISO_FT_MAX 0xFFU

#include <include/zephyr/bluetooth/iso.h>

Maximum flush timeout.

◆ BT_ISO_FT_MIN

#define BT_ISO_FT_MIN 0x01U

#include <include/zephyr/bluetooth/iso.h>

Minimum flush timeout.

◆ BT_ISO_IRC_MAX

#define BT_ISO_IRC_MAX 0x0FU

#include <include/zephyr/bluetooth/iso.h>

Maximum Immediate Repetition Count.

◆ BT_ISO_IRC_MIN

#define BT_ISO_IRC_MIN 0x01U

#include <include/zephyr/bluetooth/iso.h>

Minimum Immediate Repetition Count.

◆ BT_ISO_ISO_INTERVAL_MAX

#define BT_ISO_ISO_INTERVAL_MAX 0x0C80U

#include <include/zephyr/bluetooth/iso.h>

Maximum ISO interval (N * 1.25 ms)

◆ BT_ISO_ISO_INTERVAL_MIN

#define BT_ISO_ISO_INTERVAL_MIN 0x0004U

#include <include/zephyr/bluetooth/iso.h>

Minimum ISO interval (N * 1.25 ms)

◆ BT_ISO_LATENCY_MAX

#define BT_ISO_LATENCY_MAX 0x0FA0

#include <include/zephyr/bluetooth/iso.h>

Maximum latency value in milliseconds.

◆ BT_ISO_LATENCY_MIN

#define BT_ISO_LATENCY_MIN 0x0005

#include <include/zephyr/bluetooth/iso.h>

Minimum latency value in milliseconds.

◆ BT_ISO_MAX_GROUP_ISO_COUNT

#define BT_ISO_MAX_GROUP_ISO_COUNT 0x1F

#include <include/zephyr/bluetooth/iso.h>

Maximum number of isochronous channels in a single group.

◆ BT_ISO_MAX_SDU

#define BT_ISO_MAX_SDU 0x0FFF

#include <include/zephyr/bluetooth/iso.h>

Maximum SDU size.

◆ BT_ISO_MIN_SDU

#define BT_ISO_MIN_SDU 0x0001

#include <include/zephyr/bluetooth/iso.h>

Minimum SDU size.

◆ BT_ISO_NSE_MAX

#define BT_ISO_NSE_MAX 0x1FU

#include <include/zephyr/bluetooth/iso.h>

Maximum number of subevents.

◆ BT_ISO_NSE_MIN

#define BT_ISO_NSE_MIN 0x01U

#include <include/zephyr/bluetooth/iso.h>

Minimum number of subevents.

◆ BT_ISO_PACKING_INTERLEAVED

#define BT_ISO_PACKING_INTERLEAVED 0x01

#include <include/zephyr/bluetooth/iso.h>

Packets will be sent interleaved between the channels in the group.

◆ BT_ISO_PACKING_SEQUENTIAL

#define BT_ISO_PACKING_SEQUENTIAL 0x00

#include <include/zephyr/bluetooth/iso.h>

Packets will be sent sequentially between the channels in the group.

◆ BT_ISO_PDU_MAX

#define BT_ISO_PDU_MAX 0x00FBU

#include <include/zephyr/bluetooth/iso.h>

Maximum PDU size.

◆ BT_ISO_PTO_MAX

#define BT_ISO_PTO_MAX 0x0FU

#include <include/zephyr/bluetooth/iso.h>

Maximum pre-transmission offset.

◆ BT_ISO_PTO_MIN

#define BT_ISO_PTO_MIN 0x00U

#include <include/zephyr/bluetooth/iso.h>

Minimum pre-transmission offset.

◆ BT_ISO_SDU_BUF_SIZE

#define BT_ISO_SDU_BUF_SIZE ( mtu ) BT_BUF_ISO_SIZE(mtu)

#include <include/zephyr/bluetooth/iso.h>

Helper to calculate needed buffer size for ISO SDUs.

Useful for creating buffer pools.

Parameters

mtu	Required ISO SDU size

Returns: Needed buffer size to match the requested ISO SDU MTU.

◆ BT_ISO_SDU_INTERVAL_MAX

#define BT_ISO_SDU_INTERVAL_MAX 0x0FFFFFU

#include <include/zephyr/bluetooth/iso.h>

Maximum interval value in microseconds.

◆ BT_ISO_SDU_INTERVAL_MIN

#define BT_ISO_SDU_INTERVAL_MIN 0x0000FFU

#include <include/zephyr/bluetooth/iso.h>

Minimum interval value in microseconds.

◆ BT_ISO_SYNC_MSE_ANY

#define BT_ISO_SYNC_MSE_ANY 0x00

#include <include/zephyr/bluetooth/iso.h>

Controller controlled maximum subevent count value.

◆ BT_ISO_SYNC_MSE_MAX

#define BT_ISO_SYNC_MSE_MAX 0x1F

#include <include/zephyr/bluetooth/iso.h>

Maximum BIG sync maximum subevent count value.

◆ BT_ISO_SYNC_MSE_MIN

#define BT_ISO_SYNC_MSE_MIN 0x01

#include <include/zephyr/bluetooth/iso.h>

Minimum BIG sync maximum subevent count value.

◆ BT_ISO_SYNC_TIMEOUT_MAX

#define BT_ISO_SYNC_TIMEOUT_MAX 0x4000

#include <include/zephyr/bluetooth/iso.h>

Maximum BIG sync timeout value (N * 10 ms)

◆ BT_ISO_SYNC_TIMEOUT_MIN

#define BT_ISO_SYNC_TIMEOUT_MIN 0x000A

#include <include/zephyr/bluetooth/iso.h>

Minimum BIG sync timeout value (N * 10 ms)

Enumeration Type Documentation

◆ anonymous enum

anonymous enum

#include <include/zephyr/bluetooth/iso.h>

ISO packet status flag bits.

Enumerator
BT_ISO_FLAGS_VALID	The ISO packet is valid.
BT_ISO_FLAGS_ERROR	The ISO packet may possibly contain errors. May be caused by a failed CRC check or if missing a part of the SDU.
BT_ISO_FLAGS_LOST	The ISO packet was lost.
BT_ISO_FLAGS_TS	Timestamp is valid. If not set, then the bt_iso_recv_info.ts value is not valid, and should not be used.

◆ bt_iso_chan_type

enum bt_iso_chan_type

#include <include/zephyr/bluetooth/iso.h>

ISO Channel Type.

Enumerator
BT_ISO_CHAN_TYPE_NONE	No channel type.
BT_ISO_CHAN_TYPE_CONNECTED	Connected.
BT_ISO_CHAN_TYPE_BROADCASTER	Isochronous broadcaster.
BT_ISO_CHAN_TYPE_SYNC_RECEIVER	Synchronized receiver.

◆ bt_iso_state

enum bt_iso_state

#include <include/zephyr/bluetooth/iso.h>

Life-span states of ISO channel.

Used only by internal APIs dealing with setting channel to proper state depending on operational context.

Enumerator
BT_ISO_STATE_DISCONNECTED	Channel disconnected.
BT_ISO_STATE_ENCRYPT_PENDING	Channel is pending ACL encryption before connecting.
BT_ISO_STATE_CONNECTING	Channel in connecting state.
BT_ISO_STATE_CONNECTED	Channel ready for upper layer traffic on it.
BT_ISO_STATE_DISCONNECTING	Channel in disconnecting state.

Function Documentation

◆ bt_iso_big_create()

int bt_iso_big_create	(	struct bt_le_ext_adv *	padv,
		struct bt_iso_big_create_param *	param,
		struct bt_iso_big **	out_big
	)

#include <include/zephyr/bluetooth/iso.h>

Creates a BIG as a broadcaster.

Parameters

[in]	padv	Pointer to the periodic advertising object the BIGInfo shall be sent on.
[in]	param	The parameters used to create and enable the BIG. The QOS parameters are determined by the QOS field of the first BIS in the BIS list of this parameter.
[out]	out_big	Broadcast Isochronous Group object on success.

Returns: 0 in case of success or negative value in case of error.

◆ bt_iso_big_sync()

int bt_iso_big_sync	(	struct bt_le_per_adv_sync *	sync,
		struct bt_iso_big_sync_param *	param,
		struct bt_iso_big **	out_big
	)

#include <include/zephyr/bluetooth/iso.h>

Creates a BIG as a receiver.

Parameters

[in]	sync	Pointer to the periodic advertising sync object the BIGInfo was received on.
[in]	param	The parameters used to create and enable the BIG sync.
[out]	out_big	Broadcast Isochronous Group object on success.

Returns: 0 in case of success or negative value in case of error.

◆ bt_iso_big_terminate()

int bt_iso_big_terminate ( struct bt_iso_big * big )

#include <include/zephyr/bluetooth/iso.h>

Terminates a BIG as a broadcaster or receiver.

Parameters

big	Pointer to the BIG structure.

Returns: 0 in case of success or negative value in case of error.

◆ bt_iso_chan_connect()

int bt_iso_chan_connect	(	const struct bt_iso_connect_param *	param,
		size_t	count
	)

#include <include/zephyr/bluetooth/iso.h>

Connect ISO channels on ACL connections.

Connect ISO channels. The ISO channels must have been initialized in a CIG first by calling bt_iso_cig_create().

Once the connection is completed the channels' connected() callback will be called. If the connection is rejected disconnected() callback is called instead.

This function will also setup the ISO data path based on the path parameter of the bt_iso_chan_io_qos for each channel.

Parameters

param	Pointer to a connect parameter array with the ISO and ACL pointers.
count	Number of connect parameters.

Return values

0	Successfully started the connecting procedure.
-EINVAL	Invalid parameters were supplied.
-EBUSY	Some ISO channels are already being connected. It is not possible to have multiple outstanding connection requests. May also be returned if `CONFIG_BT_SMP` is enabled and a pairing procedure is already in progress.
-ENOBUFS	Not buffers available to send request to controller or if `CONFIG_BT_SMP` is enabled and no more keys could be stored.
-ENOMEM	If `CONFIG_BT_SMP` is enabled and no more keys could be stored.
-EIO	Controller rejected the request or if `CONFIG_BT_SMP` is enabled and pairing has timed out.
-ENOTCONN	If `CONFIG_BT_SMP` is enabled the ACL is not connected.

◆ bt_iso_chan_disconnect()

int bt_iso_chan_disconnect ( struct bt_iso_chan * chan )

#include <include/zephyr/bluetooth/iso.h>

Disconnect connected ISO channel.

If the device is a central and the connection is pending it will be canceled and as a result the channel bt_iso_chan_ops.disconnected() callback is called.

If the device is a peripheral and the connection is pending it will be rejected, as a peripheral shall wait for a CIS Established event (which may trigger a bt_iso_chan_ops.disconnected() callback in case of an error).

Regarding to input parameter, to get details see reference description to bt_iso_chan_connect() API.

Parameters

chan	Channel object.

Returns: 0 in case of success or negative value in case of error.

◆ bt_iso_chan_get_info()

int bt_iso_chan_get_info	(	const struct bt_iso_chan *	chan,
		struct bt_iso_info *	info
	)

#include <include/zephyr/bluetooth/iso.h>

Get ISO channel info.

Parameters

chan	Channel object.
info	Channel info object.

Returns: Zero on success or (negative) error code on failure.

◆ bt_iso_chan_get_tx_sync()

int bt_iso_chan_get_tx_sync	(	const struct bt_iso_chan *	chan,
		struct bt_iso_tx_info *	info
	)

#include <include/zephyr/bluetooth/iso.h>

Get ISO transmission timing info.

Reads timing information for transmitted ISO packet on an ISO channel. The HCI_LE_Read_ISO_TX_Sync HCI command is used to retrieve this information from the controller.

Note: An SDU must have already been successfully transmitted on the ISO channel for this function to return successfully.

Parameters

[in]	chan	Channel object.
[out]	info	Transmit info object.

Returns: Zero on success or (negative) error code on failure.

◆ bt_iso_chan_send()

int bt_iso_chan_send	(	struct bt_iso_chan *	chan,
		struct net_buf *	buf,
		uint16_t	seq_num
	)

#include <include/zephyr/bluetooth/iso.h>

Send data to ISO channel without timestamp.

Send data from buffer to the channel. If credits are not available, buf will be queued and sent as and when credits are received from peer. Regarding to first input parameter, to get details see reference description to bt_iso_chan_connect() API.

Note: Buffer ownership is transferred to the stack in case of success, in case of an error the caller retains the ownership of the buffer.

Parameters

chan	Channel object.
buf	Buffer containing data to be sent.
seq_num	Packet Sequence number. This value shall be incremented for each call to this function and at least once per SDU interval for a specific channel.

Returns: Number of octets sent in case of success or negative value in case of error.

◆ bt_iso_chan_send_ts()

int bt_iso_chan_send_ts	(	struct bt_iso_chan *	chan,
		struct net_buf *	buf,
		uint16_t	seq_num,
		uint32_t	ts
	)

#include <include/zephyr/bluetooth/iso.h>

Send data to ISO channel with timestamp.

Send data from buffer to the channel. If credits are not available, buf will be queued and sent as and when credits are received from peer. Regarding to first input parameter, to get details see reference description to bt_iso_chan_connect() API.

Note: Buffer ownership is transferred to the stack in case of success, in case of an error the caller retains the ownership of the buffer.

Parameters

chan	Channel object.
buf	Buffer containing data to be sent.
seq_num	Packet Sequence number. This value shall be incremented for each call to this function and at least once per SDU interval for a specific channel.
ts	Timestamp of the SDU in microseconds (us). This value can be used to transmit multiple SDUs in the same SDU interval in a CIG or BIG.

Returns: Number of octets sent in case of success or negative value in case of error.

◆ bt_iso_cig_create()

int bt_iso_cig_create	(	const struct bt_iso_cig_param *	param,
		struct bt_iso_cig **	out_cig
	)

#include <include/zephyr/bluetooth/iso.h>

Creates a CIG as a central.

This can called at any time, even before connecting to a remote device. This must be called before any connected isochronous stream (CIS) channel can be connected.

Once a CIG is created, the channels supplied in the param can be connected using bt_iso_chan_connect().

Parameters

[in]	param	The parameters used to create and enable the CIG.
[out]	out_cig	Connected Isochronous Group object on success.

Returns: 0 in case of success or negative value in case of error.

◆ bt_iso_cig_reconfigure()

int bt_iso_cig_reconfigure	(	struct bt_iso_cig *	cig,
		const struct bt_iso_cig_param *	param
	)

#include <include/zephyr/bluetooth/iso.h>

Reconfigure a CIG as a central.

This function can be used to update a CIG. It will update the group specific parameters, and, if supplied, change the QoS parameters of the individual CIS. If the cis_channels in param contains CIS that was not originally in the call to bt_iso_cig_create(), these will be added to the group. It is not possible to remove any CIS from the group after creation.

This can be called at any time before connecting an ISO to a remote device. Once any CIS in the group has connected, the group cannot be changed.

Once a CIG is created, the channels supplied in the param can be connected using bt_iso_chan_connect().

Parameters

cig	Connected Isochronous Group object.
param	The parameters used to reconfigure the CIG.

Returns: 0 in case of success or negative value in case of error.

◆ bt_iso_cig_terminate()

int bt_iso_cig_terminate ( struct bt_iso_cig * cig )

#include <include/zephyr/bluetooth/iso.h>

Terminates a CIG as a central.

All the CIS in the CIG shall be disconnected first.

Parameters

cig	Pointer to the CIG structure.

Returns: 0 in case of success or negative value in case of error.

◆ bt_iso_server_register()

int bt_iso_server_register ( struct bt_iso_server * server )

#include <include/zephyr/bluetooth/iso.h>

Register ISO server.

Register ISO server, each new connection is authorized using the accept() callback which in case of success shall allocate the channel structure to be used by the new connection.

Parameters

server Server structure.

Returns: 0 in case of success or negative value in case of error.

◆ bt_iso_server_unregister()

int bt_iso_server_unregister ( struct bt_iso_server * server )

#include <include/zephyr/bluetooth/iso.h>

Unregister ISO server.

Unregister previously registered ISO server.

Parameters

server Server structure.

Returns: 0 in case of success or negative value in case of error.

Data Structures

Macros

Enumerations

Functions

Detailed Description

Macro Definition Documentation

◆ BT_ISO_BIS_INDEX_MAX

◆ BT_ISO_BIS_INDEX_MIN

◆ BT_ISO_BN_MAX

◆ BT_ISO_BN_MIN

◆ BT_ISO_BROADCAST_CODE_SIZE

◆ BT_ISO_BROADCAST_PDU_MIN

◆ BT_ISO_BROADCAST_RTN_MAX

◆ BT_ISO_CHAN_SEND_RESERVE

◆ BT_ISO_CONNECTED_PDU_MIN

◆ BT_ISO_CONNECTED_RTN_MAX

◆ BT_ISO_DATA_PATH_HCI

◆ BT_ISO_FRAMING_FRAMED

◆ BT_ISO_FRAMING_UNFRAMED

◆ BT_ISO_FT_MAX

◆ BT_ISO_FT_MIN

◆ BT_ISO_IRC_MAX

◆ BT_ISO_IRC_MIN

◆ BT_ISO_ISO_INTERVAL_MAX

◆ BT_ISO_ISO_INTERVAL_MIN

◆ BT_ISO_LATENCY_MAX

◆ BT_ISO_LATENCY_MIN

◆ BT_ISO_MAX_GROUP_ISO_COUNT

◆ BT_ISO_MAX_SDU

◆ BT_ISO_MIN_SDU

◆ BT_ISO_NSE_MAX

◆ BT_ISO_NSE_MIN

◆ BT_ISO_PACKING_INTERLEAVED

◆ BT_ISO_PACKING_SEQUENTIAL

◆ BT_ISO_PDU_MAX

◆ BT_ISO_PTO_MAX

◆ BT_ISO_PTO_MIN

◆ BT_ISO_SDU_BUF_SIZE

◆ BT_ISO_SDU_INTERVAL_MAX

◆ BT_ISO_SDU_INTERVAL_MIN

◆ BT_ISO_SYNC_MSE_ANY

◆ BT_ISO_SYNC_MSE_MAX

◆ BT_ISO_SYNC_MSE_MIN

◆ BT_ISO_SYNC_TIMEOUT_MAX

◆ BT_ISO_SYNC_TIMEOUT_MIN

Enumeration Type Documentation

◆ anonymous enum

◆ bt_iso_chan_type

◆ bt_iso_state

Function Documentation

◆ bt_iso_big_create()

◆ bt_iso_big_sync()

◆ bt_iso_big_terminate()

◆ bt_iso_chan_connect()

◆ bt_iso_chan_disconnect()

◆ bt_iso_chan_get_info()

◆ bt_iso_chan_get_tx_sync()

◆ bt_iso_chan_send()

◆ bt_iso_chan_send_ts()

◆ bt_iso_cig_create()

◆ bt_iso_cig_reconfigure()

◆ bt_iso_cig_terminate()

◆ bt_iso_server_register()

◆ bt_iso_server_unregister()