MIPI-DSI driver APIs

MIPI-DSI driver APIs. More...

Data Structures
struct	mipi_dsi_timings
	MIPI-DSI display timings. More...
struct	mipi_dsi_device
	MIPI-DSI device. More...
struct	mipi_dsi_msg
	MIPI-DSI read/write message. More...
struct	mipi_dsi_driver_api
	MIPI-DSI host driver API. More...

Macros
#define	MIPI_DSI_MSG_USE_LPM   BIT(0x0)

Functions
static int	mipi_dsi_attach (const struct device *dev, uint8_t channel, const struct mipi_dsi_device *mdev)
	Attach a new device to the MIPI-DSI bus.
static ssize_t	mipi_dsi_transfer (const struct device *dev, uint8_t channel, struct mipi_dsi_msg *msg)
	Transfer data to/from a device attached to the MIPI-DSI bus.
ssize_t	mipi_dsi_generic_read (const struct device *dev, uint8_t channel, const void *params, size_t nparams, void *buf, size_t len)
	MIPI-DSI generic read.
ssize_t	mipi_dsi_generic_write (const struct device *dev, uint8_t channel, const void *buf, size_t len)
	MIPI-DSI generic write.
ssize_t	mipi_dsi_dcs_read (const struct device *dev, uint8_t channel, uint8_t cmd, void *buf, size_t len)
	MIPI-DSI DCS read.
ssize_t	mipi_dsi_dcs_write (const struct device *dev, uint8_t channel, uint8_t cmd, const void *buf, size_t len)
	MIPI-DSI DCS write.
static int	mipi_dsi_detach (const struct device *dev, uint8_t channel, const struct mipi_dsi_device *mdev)
	Detach a device from the MIPI-DSI bus.

MIPI-DSI Device mode flags.
#define	MIPI_DSI_MODE_VIDEO   BIT(0)
	Video mode.
#define	MIPI_DSI_MODE_VIDEO_BURST   BIT(1)
	Video burst mode.
#define	MIPI_DSI_MODE_VIDEO_SYNC_PULSE   BIT(2)
	Video pulse mode.
#define	MIPI_DSI_MODE_VIDEO_AUTO_VERT   BIT(3)
	Enable auto vertical count mode.
#define	MIPI_DSI_MODE_VIDEO_HSE   BIT(4)
	Enable hsync-end packets in vsync-pulse and v-porch area.
#define	MIPI_DSI_MODE_VIDEO_HFP   BIT(5)
	Disable hfront-porch area.
#define	MIPI_DSI_MODE_VIDEO_HBP   BIT(6)
	Disable hback-porch area.
#define	MIPI_DSI_MODE_VIDEO_HSA   BIT(7)
	Disable hsync-active area.
#define	MIPI_DSI_MODE_VSYNC_FLUSH   BIT(8)
	Flush display FIFO on vsync pulse.
#define	MIPI_DSI_MODE_EOT_PACKET   BIT(9)
	Disable EoT packets in HS mode.
#define	MIPI_DSI_CLOCK_NON_CONTINUOUS   BIT(10)
	Device supports non-continuous clock behavior (DSI spec 5.6.1)
#define	MIPI_DSI_MODE_LPM   BIT(11)
	Transmit data in low power.

MIPI-DSI Pixel formats.
#define	MIPI_DSI_PIXFMT_RGB888   0U
	RGB888 (24bpp).
#define	MIPI_DSI_PIXFMT_RGB666   1U
	RGB666 (24bpp).
#define	MIPI_DSI_PIXFMT_RGB666_PACKED   2U
	Packed RGB666 (18bpp).
#define	MIPI_DSI_PIXFMT_RGB565   3U
	RGB565 (16bpp).

Detailed Description

MIPI-DSI driver APIs.

Since

3.1

Version

0.1.0

Macro Definition Documentation

MIPI_DSI_CLOCK_NON_CONTINUOUS

#define MIPI_DSI_CLOCK_NON_CONTINUOUS   BIT(10)

#include <include/zephyr/drivers/mipi_dsi.h>

Device supports non-continuous clock behavior (DSI spec 5.6.1)

MIPI_DSI_MODE_EOT_PACKET

#define MIPI_DSI_MODE_EOT_PACKET   BIT(9)

#include <include/zephyr/drivers/mipi_dsi.h>

Disable EoT packets in HS mode.

MIPI_DSI_MODE_LPM

#define MIPI_DSI_MODE_LPM   BIT(11)

#include <include/zephyr/drivers/mipi_dsi.h>

Transmit data in low power.

MIPI_DSI_MODE_VIDEO

#define MIPI_DSI_MODE_VIDEO   BIT(0)

#include <include/zephyr/drivers/mipi_dsi.h>

Video mode.

MIPI_DSI_MODE_VIDEO_AUTO_VERT

#define MIPI_DSI_MODE_VIDEO_AUTO_VERT   BIT(3)

#include <include/zephyr/drivers/mipi_dsi.h>

Enable auto vertical count mode.

MIPI_DSI_MODE_VIDEO_BURST

#define MIPI_DSI_MODE_VIDEO_BURST   BIT(1)

#include <include/zephyr/drivers/mipi_dsi.h>

Video burst mode.

MIPI_DSI_MODE_VIDEO_HBP

#define MIPI_DSI_MODE_VIDEO_HBP   BIT(6)

#include <include/zephyr/drivers/mipi_dsi.h>

Disable hback-porch area.

MIPI_DSI_MODE_VIDEO_HFP

#define MIPI_DSI_MODE_VIDEO_HFP   BIT(5)

#include <include/zephyr/drivers/mipi_dsi.h>

Disable hfront-porch area.

MIPI_DSI_MODE_VIDEO_HSA

#define MIPI_DSI_MODE_VIDEO_HSA   BIT(7)

#include <include/zephyr/drivers/mipi_dsi.h>

Disable hsync-active area.

MIPI_DSI_MODE_VIDEO_HSE

#define MIPI_DSI_MODE_VIDEO_HSE   BIT(4)

#include <include/zephyr/drivers/mipi_dsi.h>

Enable hsync-end packets in vsync-pulse and v-porch area.

MIPI_DSI_MODE_VIDEO_SYNC_PULSE

#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE   BIT(2)

#include <include/zephyr/drivers/mipi_dsi.h>

Video pulse mode.

MIPI_DSI_MODE_VSYNC_FLUSH

#define MIPI_DSI_MODE_VSYNC_FLUSH   BIT(8)

#include <include/zephyr/drivers/mipi_dsi.h>

Flush display FIFO on vsync pulse.

MIPI_DSI_MSG_USE_LPM

#define MIPI_DSI_MSG_USE_LPM   BIT(0x0)

#include <include/zephyr/drivers/mipi_dsi.h>

MIPI_DSI_PIXFMT_RGB565

#define MIPI_DSI_PIXFMT_RGB565   3U

#include <include/zephyr/dt-bindings/mipi_dsi/mipi_dsi.h>

RGB565 (16bpp).

MIPI_DSI_PIXFMT_RGB666

#define MIPI_DSI_PIXFMT_RGB666   1U

#include <include/zephyr/dt-bindings/mipi_dsi/mipi_dsi.h>

RGB666 (24bpp).

MIPI_DSI_PIXFMT_RGB666_PACKED

#define MIPI_DSI_PIXFMT_RGB666_PACKED   2U

#include <include/zephyr/dt-bindings/mipi_dsi/mipi_dsi.h>

Packed RGB666 (18bpp).

MIPI_DSI_PIXFMT_RGB888

#define MIPI_DSI_PIXFMT_RGB888   0U

#include <include/zephyr/dt-bindings/mipi_dsi/mipi_dsi.h>

RGB888 (24bpp).

Function Documentation

mipi_dsi_attach()

static int mipi_dsi_attach ( const struct device *  dev, uint8_t  channel, const struct mipi_dsi_device *  mdev  )

inlinestatic

#include <include/zephyr/drivers/mipi_dsi.h>

Attach a new device to the MIPI-DSI bus.

Parameters

dev	MIPI-DSI host device.
channel	Device channel (VID).
mdev	MIPI-DSI device description.

Returns

0 on success, negative on error

mipi_dsi_dcs_read()

ssize_t mipi_dsi_dcs_read	(	const struct device *	dev,
		uint8_t	channel,
		uint8_t	cmd,
		void *	buf,
		size_t	len
	)

#include <include/zephyr/drivers/mipi_dsi.h>

MIPI-DSI DCS read.

Parameters

dev	MIPI-DSI host device.
channel	Device channel (VID).
cmd	DCS command.
buf	Buffer where read data will be stored.
len	Length of the reception buffer.

Returns

Size of the read data on success, negative on error.

mipi_dsi_dcs_write()

ssize_t mipi_dsi_dcs_write	(	const struct device *	dev,
		uint8_t	channel,
		uint8_t	cmd,
		const void *	buf,
		size_t	len
	)

#include <include/zephyr/drivers/mipi_dsi.h>

MIPI-DSI DCS write.

Parameters

dev	MIPI-DSI host device.
channel	Device channel (VID).
cmd	DCS command.
buf	Transmission buffer.
len	Length of the transmission buffer

Returns

Size of the written data on success, negative on error.

mipi_dsi_detach()

static int mipi_dsi_detach ( const struct device *  dev, uint8_t  channel, const struct mipi_dsi_device *  mdev  )

inlinestatic

#include <include/zephyr/drivers/mipi_dsi.h>

Detach a device from the MIPI-DSI bus.

Parameters

dev	MIPI-DSI host device.
channel	Device channel (VID).
mdev	MIPI-DSI device description.

Returns

0 on success, negative on error

mipi_dsi_generic_read()

ssize_t mipi_dsi_generic_read	(	const struct device *	dev,
		uint8_t	channel,
		const void *	params,
		size_t	nparams,
		void *	buf,
		size_t	len
	)

#include <include/zephyr/drivers/mipi_dsi.h>

MIPI-DSI generic read.

Parameters

dev	MIPI-DSI host device.
channel	Device channel (VID).
params	Buffer containing request parameters.
nparams	Number of parameters.
buf	Buffer where read data will be stored.
len	Length of the reception buffer.

Returns

Size of the read data on success, negative on error.

mipi_dsi_generic_write()

ssize_t mipi_dsi_generic_write	(	const struct device *	dev,
		uint8_t	channel,
		const void *	buf,
		size_t	len
	)

#include <include/zephyr/drivers/mipi_dsi.h>

MIPI-DSI generic write.

Parameters

dev	MIPI-DSI host device.
channel	Device channel (VID).
buf	Transmission buffer.
len	Length of the transmission buffer

Returns

Size of the written data on success, negative on error.

mipi_dsi_transfer()

static ssize_t mipi_dsi_transfer ( const struct device *  dev, uint8_t  channel, struct mipi_dsi_msg *  msg  )

inlinestatic

#include <include/zephyr/drivers/mipi_dsi.h>

Transfer data to/from a device attached to the MIPI-DSI bus.

Parameters

dev	MIPI-DSI device.
channel	Device channel (VID).
msg	Message.

Returns

Size of the transferred data on success, negative on error.