Zephyr Project API 3.7.0
A Scalable Open Source RTOS
Loading...
Searching...
No Matches
lis2du12.h
Go to the documentation of this file.
1/*
2 * Copyright (c) 2023 STMicroelectronics
3 *
4 * SPDX-License-Identifier: Apache-2.0
5 */
6#ifndef ZEPHYR_INCLUDE_DT_BINDINGS_ST_LIS2DU12_H_
7#define ZEPHYR_INCLUDE_DT_BINDINGS_ST_LIS2DU12_H_
8
9/* Accel range */
10#define LIS2DU12_DT_FS_2G 0
11#define LIS2DU12_DT_FS_4G 1
12#define LIS2DU12_DT_FS_8G 2
13#define LIS2DU12_DT_FS_16G 3
14
15/* Accel rates */
16#define LIS2DU12_DT_ODR_OFF 0x00 /* Power-Down */
17#define LIS2DU12_DT_ODR_AT_1Hz6_ULP 0x01 /* 1Hz6 (ultra low power) */
18#define LIS2DU12_DT_ODR_AT_3Hz_ULP 0x02 /* 3Hz (ultra low power) */
19#define LIS2DU12_DT_ODR_AT_6Hz_ULP 0x03 /* 6Hz (ultra low power) */
20#define LIS2DU12_DT_ODR_AT_6Hz 0x04 /* 6Hz (normal) */
21#define LIS2DU12_DT_ODR_AT_12Hz 0x05 /* 12Hz5 (normal) */
22#define LIS2DU12_DT_ODR_AT_25Hz 0x06 /* 25Hz (normal) */
23#define LIS2DU12_DT_ODR_AT_50Hz 0x07 /* 50Hz (normal) */
24#define LIS2DU12_DT_ODR_AT_100Hz 0x08 /* 100Hz (normal) */
25#define LIS2DU12_DT_ODR_AT_200Hz 0x09 /* 200Hz (normal) */
26#define LIS2DU12_DT_ODR_AT_400Hz 0x0a /* 400Hz (normal) */
27#define LIS2DU12_DT_ODR_AT_800Hz 0x0b /* 800Hz (normal) */
28#define LIS2DU12_DT_ODR_TRIG_PIN 0x0e /* Single-shot high latency by INT2 */
29#define LIS2DU12_DT_ODR_TRIG_SW 0x0f /* Single-shot high latency by IF */
30
31#endif /* ZEPHYR_INCLUDE_DT_BINDINGS_ST_LIS2DU12_H_ */