Channel sounding configuration. More...

#include <conn.h>

Data Fields
uint8_t	id
	CS configuration ID.
enum bt_conn_le_cs_mode	mode
	CS main and sub mode.
uint8_t	min_main_mode_steps
	Minimum number of CS main mode steps to be executed before a submode step is executed.
uint8_t	max_main_mode_steps
	Maximum number of CS main mode steps to be executed before a submode step is executed.
uint8_t	main_mode_repetition
	Number of main mode steps taken from the end of the last CS subevent to be repeated at the beginning of the current CS subevent directly after the last mode-0 step of that event.
uint8_t	mode_0_steps
	Number of CS mode-0 steps to be included at the beginning of each CS subevent.
enum bt_conn_le_cs_role	role
	CS role.
enum bt_conn_le_cs_rtt_type	rtt_type
	RTT type.
enum bt_conn_le_cs_sync_phy	cs_sync_phy
	CS Sync PHY.
uint8_t	channel_map_repetition
	The number of times the Channel_Map field will be cycled through for non-mode-0 steps within a CS procedure.
enum bt_conn_le_cs_chsel_type	channel_selection_type
	Channel selection type.
enum bt_conn_le_cs_ch3c_shape	ch3c_shape
	User-specified channel sequence shape.
uint8_t	ch3c_jump
	Number of channels skipped in each rising and falling sequence.
uint8_t	cs_enhancements_1
	CS enhancements 1 Bit 0 - IPT is enabled in the CS reflector.
uint8_t	t_ip1_time_us
	Interlude time in microseconds between the RTT packets.
uint8_t	t_ip2_time_us
	Interlude time in microseconds between the CS tones.
uint8_t	t_fcs_time_us
	Time in microseconds for frequency changes.
uint8_t	t_pm_time_us
	Time in microseconds for the phase measurement period of the CS tones.
uint8_t	channel_map [10]
	Channel map used for CS procedure Channels n = 0, 1, 23, 24, 25, 77, and 78 are not allowed and shall be set to zero.

Detailed Description

Channel sounding configuration.

The documentation for this struct was generated from the following file:

include/zephyr/bluetooth/conn.h

Data Fields

Detailed Description