bt_conn_le_tx_power_report Struct Reference

LE Transmit Power Reporting Structure. More...

#include <conn.h>

Data Fields
uint8_t	reason
	Reason for Transmit power reporting, as documented in Core Spec.
enum bt_conn_le_tx_power_phy	phy
	Phy of Transmit power reporting.
int8_t	tx_power_level
	Transmit power level.
uint8_t	tx_power_level_flag
	Bit 0: Transmit power level is at minimum level.
int8_t	delta
	Change in transmit power level.

Detailed Description

LE Transmit Power Reporting Structure.

Field Documentation

delta

int8_t bt_conn_le_tx_power_report::delta

Change in transmit power level.

• 0xXX - Change in transmit power level (positive indicates increased power, negative indicates decreased power, zero indicates unchanged) Units: dB
• 0x7F - Change is not available or is out of range.

phy

enum bt_conn_le_tx_power_phy bt_conn_le_tx_power_report::phy

Phy of Transmit power reporting.

reason

uint8_t bt_conn_le_tx_power_report::reason

Reason for Transmit power reporting, as documented in Core Spec.

Version 5.4 Vol. 4, Part E, 7.7.65.33.

tx_power_level

int8_t bt_conn_le_tx_power_report::tx_power_level

Transmit power level.

• 0xXX - Transmit power level
  • Range: -127 to 20
  • Units: dBm
• 0x7E - Remote device is not managing power levels on this PHY.
• 0x7F - Transmit power level is not available

tx_power_level_flag

uint8_t bt_conn_le_tx_power_report::tx_power_level_flag

Bit 0: Transmit power level is at minimum level.

Bit 1: Transmit power level is at maximum level.

---

The documentation for this struct was generated from the following file:

• include/zephyr/bluetooth/conn.h