Configuration parameters for I3C hardware to act as target device. More...

#include <target_device.h>

Data Fields
bool	enable
	If the hardware is to act as a target device on the bus.

uint8_t	static_addr
	I3C target address.

uint64_t	pid
	Provisioned ID.

bool	pid_random
	True if lower 32-bit of Provisioned ID is random.

uint8_t	bcr
	Bus Characteristics Register (BCR).

uint8_t	dcr
	Device Characteristics Register (DCR).

uint16_t	max_read_len
	Maximum Read Length (MRL).

uint16_t	max_write_len
	Maximum Write Length (MWL).

uint8_t	supported_hdr
	Bit mask of supported HDR modes (0 - 7).

Detailed Description

Configuration parameters for I3C hardware to act as target device.

This can also be used to configure the controller if it is to act as a secondary controller on the bus.

Field Documentation

◆ bcr

uint8_t i3c_config_target::bcr

Bus Characteristics Register (BCR).

◆ dcr

uint8_t i3c_config_target::dcr

Device Characteristics Register (DCR).

◆ enable

bool i3c_config_target::enable

If the hardware is to act as a target device on the bus.

◆ max_read_len

uint16_t i3c_config_target::max_read_len

Maximum Read Length (MRL).

◆ max_write_len

uint16_t i3c_config_target::max_write_len

Maximum Write Length (MWL).

◆ pid

uint64_t i3c_config_target::pid

Provisioned ID.

◆ pid_random

bool i3c_config_target::pid_random

True if lower 32-bit of Provisioned ID is random.

This sets the bit 32 of Provisioned ID which means the lower 32-bit is random value.

◆ static_addr

uint8_t i3c_config_target::static_addr

I3C target address.

Used used when operates as secondary controller or as a target device.

◆ supported_hdr

uint8_t i3c_config_target::supported_hdr

Bit mask of supported HDR modes (0 - 7).

This can be used to enable or disable HDR mode supported by the hardware at runtime.

The documentation for this struct was generated from the following file:

include/zephyr/drivers/i3c/target_device.h

Data Fields