MQTT Client definition to maintain information relevant to the client. More...

#include <mqtt.h>

Data Fields
struct mqtt_internal	internal
	MQTT client internal state.

struct mqtt_transport	transport
	MQTT transport configuration and data.

struct mqtt_utf8	client_id
	Unique client identification to be used for the connection.

const void *	broker
	Broker details, for example, address, port.

struct mqtt_utf8 *	user_name
	User name (if any) to be used for the connection.

struct mqtt_utf8 *	password
	Password (if any) to be used for the connection.

struct mqtt_topic *	will_topic
	Will topic and QoS.

struct mqtt_utf8 *	will_message
	Will message.

mqtt_evt_cb_t	evt_cb
	Application callback registered with the module to get MQTT events.

uint8_t *	rx_buf
	Receive buffer used for MQTT packet reception in RX path.

uint32_t	rx_buf_size
	Size of receive buffer.

uint8_t *	tx_buf
	Transmit buffer used for creating MQTT packet in TX path.

uint32_t	tx_buf_size
	Size of transmit buffer.

uint16_t	keepalive
	Keepalive interval for this client in seconds.

uint8_t	protocol_version
	MQTT protocol version.

int8_t	unacked_ping
	Unanswered PINGREQ count on this connection.

uint8_t	will_retain: 1
	Will retain flag, 1 if will message shall be retained persistently.

uint8_t	clean_session: 1
	Clean session flag indicating a fresh (1) or a retained session (0).

void *	user_data
	User specific opaque data.

Detailed Description

MQTT Client definition to maintain information relevant to the client.

Field Documentation

◆ broker

const void* mqtt_client::broker

Broker details, for example, address, port.

Address type should be compatible with transport used.

◆ clean_session

uint8_t mqtt_client::clean_session

Clean session flag indicating a fresh (1) or a retained session (0).

Default is CONFIG_MQTT_CLEAN_SESSION.

◆ client_id

struct mqtt_utf8 mqtt_client::client_id

Unique client identification to be used for the connection.

◆ evt_cb

mqtt_evt_cb_t mqtt_client::evt_cb

Application callback registered with the module to get MQTT events.

◆ internal

struct mqtt_internal mqtt_client::internal

MQTT client internal state.

◆ keepalive

uint16_t mqtt_client::keepalive

Keepalive interval for this client in seconds.

Default is CONFIG_MQTT_KEEPALIVE.

◆ password

struct mqtt_utf8* mqtt_client::password

Password (if any) to be used for the connection.

Note that if password is provided, user name shall also be provided. NULL indicates no password.

◆ protocol_version

uint8_t mqtt_client::protocol_version

MQTT protocol version.

◆ rx_buf

uint8_t* mqtt_client::rx_buf

Receive buffer used for MQTT packet reception in RX path.

◆ rx_buf_size

uint32_t mqtt_client::rx_buf_size

Size of receive buffer.

◆ transport

struct mqtt_transport mqtt_client::transport

MQTT transport configuration and data.

◆ tx_buf

uint8_t* mqtt_client::tx_buf

Transmit buffer used for creating MQTT packet in TX path.

◆ tx_buf_size

uint32_t mqtt_client::tx_buf_size

Size of transmit buffer.

◆ unacked_ping

int8_t mqtt_client::unacked_ping

Unanswered PINGREQ count on this connection.

◆ user_data

void* mqtt_client::user_data

User specific opaque data.

◆ user_name

struct mqtt_utf8* mqtt_client::user_name

User name (if any) to be used for the connection.

NULL indicates no user name.

◆ will_message

struct mqtt_utf8* mqtt_client::will_message

Will message.

Can be NULL. Non NULL value valid only if will topic is not NULL.

◆ will_retain

uint8_t mqtt_client::will_retain

Will retain flag, 1 if will message shall be retained persistently.

◆ will_topic

struct mqtt_topic* mqtt_client::will_topic

Will topic and QoS.

Can be NULL.

The documentation for this struct was generated from the following file:

include/zephyr/net/mqtt.h

Data Fields