osdp_cmd_led_params Struct Reference

LED params sub-structure. More...

#include <osdp.h>

Data Fields
uint8_t	control_code
	Control code.
uint8_t	on_count
	The ON duration of the flash, in units of 100 ms.
uint8_t	off_count
	The OFF duration of the flash, in units of 100 ms.
uint8_t	on_color
	Color to set during the ON timer (see osdp_led_color_e).
uint8_t	off_color
	Color to set during the OFF timer (see osdp_led_color_e).
uint16_t	timer_count
	Time in units of 100 ms (only for temporary mode).

Detailed Description

LED params sub-structure.

Part of LED command. See osdp_cmd_led.

Field Documentation

control_code

uint8_t osdp_cmd_led_params::control_code

Control code.

Temporary Control Code:

• 0 - NOP - do not alter this LED's temporary settings.
• 1 - Cancel any temporary operation and display this LED's permanent state immediately.
• 2 - Set the temporary state as given and start timer immediately.

Permanent Control Code:

• 0 - NOP - do not alter this LED's permanent settings.
• 1 - Set the permanent state as given.

off_color

uint8_t osdp_cmd_led_params::off_color

Color to set during the OFF timer (see osdp_led_color_e).

off_count

uint8_t osdp_cmd_led_params::off_count

The OFF duration of the flash, in units of 100 ms.

on_color

uint8_t osdp_cmd_led_params::on_color

Color to set during the ON timer (see osdp_led_color_e).

on_count

uint8_t osdp_cmd_led_params::on_count

The ON duration of the flash, in units of 100 ms.

timer_count

uint16_t osdp_cmd_led_params::timer_count

Time in units of 100 ms (only for temporary mode).

---

The documentation for this struct was generated from the following file:

• include/zephyr/mgmt/osdp.h