osdp_cmd_output Struct Reference

Command sent from CP to Control digital output of PD. More...

#include <osdp.h>

Data Fields
uint8_t	output_no
	Output number.
uint8_t	control_code
	Control code.
uint16_t	timer_count
	Time in units of 100 ms.

Detailed Description

Command sent from CP to Control digital output of PD.

Field Documentation

control_code

uint8_t osdp_cmd_output::control_code

Control code.

• 0 - NOP – do not alter this output
• 1 - set the permanent state to OFF, abort timed operation (if any)
• 2 - set the permanent state to ON, abort timed operation (if any)
• 3 - set the permanent state to OFF, allow timed operation to complete
• 4 - set the permanent state to ON, allow timed operation to complete
• 5 - set the temporary state to ON, resume perm state on timeout
• 6 - set the temporary state to OFF, resume permanent state on timeout

output_no

uint8_t osdp_cmd_output::output_no

Output number.

0 = First Output, 1 = Second Output, etc.

timer_count

uint16_t osdp_cmd_output::timer_count

Time in units of 100 ms.

---

The documentation for this struct was generated from the following file:

• include/zephyr/mgmt/osdp.h