Create a Fixed Supply PDO Sink value See Table 6-14 Fixed Supply PDO - Sink. More...

#include <usbc_pd.h>

Data Fields
struct {

uint32_t operational_current: 10
	Operational Current in 10mA units. More...

uint32_t voltage: 10
	Voltage in 50mV units. More...

uint32_t reserved0: 3
	Reserved – Shall be set to zero. More...

enum pd_frs_type frs_required: 2
	Fast Role Swap required USB Type-C Current. More...

uint32_t dual_role_data: 1
	Dual-Role Data. More...

uint32_t usb_comms_capable: 1
	USB Communications Capable. More...

uint32_t unconstrained_power: 1
	Unconstrained Power. More...

uint32_t higher_capability: 1
	Higher Capability. More...

uint32_t dual_role_power: 1
	Dual-Role Power. More...

enum pdo_type type: 2
	Fixed supply. More...

};

uint32_t	raw_value
	Raw PDO value.

Detailed Description

Create a Fixed Supply PDO Sink value See Table 6-14 Fixed Supply PDO - Sink.

Field Documentation

◆ [struct]

struct { ... } pd_fixed_supply_pdo_sink

◆ dual_role_data

uint32_t pd_fixed_supply_pdo_sink::dual_role_data

Dual-Role Data.

◆ dual_role_power

uint32_t pd_fixed_supply_pdo_sink::dual_role_power

Dual-Role Power.

◆ frs_required

enum pd_frs_type pd_fixed_supply_pdo_sink::frs_required

Fast Role Swap required USB Type-C Current.

◆ higher_capability

uint32_t pd_fixed_supply_pdo_sink::higher_capability

Higher Capability.

◆ operational_current

uint32_t pd_fixed_supply_pdo_sink::operational_current

Operational Current in 10mA units.

◆ raw_value

uint32_t pd_fixed_supply_pdo_sink::raw_value

Raw PDO value.

◆ reserved0

uint32_t pd_fixed_supply_pdo_sink::reserved0

Reserved – Shall be set to zero.

◆ type

enum pdo_type pd_fixed_supply_pdo_sink::type

Fixed supply.

SET TO PDO_FIXED

◆ unconstrained_power

uint32_t pd_fixed_supply_pdo_sink::unconstrained_power

Unconstrained Power.

◆ usb_comms_capable

uint32_t pd_fixed_supply_pdo_sink::usb_comms_capable

USB Communications Capable.

◆ voltage

uint32_t pd_fixed_supply_pdo_sink::voltage

Voltage in 50mV units.

The documentation for this union was generated from the following file:

include/zephyr/drivers/usb_c/usbc_pd.h

Data Fields