TagoIO HTTP Post
Overview
This sample application implements an HTTP client that will do an HTTP post request to TagoIO [1] IoT Service Platform. The sample sends random temperature values to simulate a real device. This can be used to speed-up development and shows how to send simple JSON data to TagoIO [1] servers.
The source code for this sample application can be found at: samples/net/cloud/tagoio_http_post.
Requirements
A board with internet connectivity, see Networking
The example provides three ways to get internet:
Ethernet: Using default configuration
WiFi: Using default configuration plus wifi overlay
TagoIO Device Configuration
If you don’t have a TagoIO [1] account, simple create a free account at
TagoIO [1]. After that, add a device selecting Custom HTTP(S) protocol. That
is it! Now reveal your device token. The token will be used to identify your
device when sending data. You need fill CONFIG_TAGOIO_DEVICE_TOKEN
at
samples/net/cloud/tagoio_http_post/prj.conf file with that
information.
Building and Running
Ethernet
You can use this application on a supported board with ethernet port. There are many like SAM4E Xplained Pro, SAM V71(B) Xplained Ultra, NXP FRDM-K64F, ST Nucleo F767ZI etc. Pick one and just build tagoio-http-client sample application with minimal configuration:
west build -b [sam4e_xpro | sam_v71_xult/samv71q21 | frdm_k64f | nucleo_f767zi] samples/net/cloud/tagoio_http_post
west flash
WIFI
To enable WIFI support, you need a board with an embedded WIFI support like
ST Disco L475 IOT01 (B-L475E-IOT01A) or you can add a shield like
ESP-8266 Modules or Inventek es-WIFI Shield. Additionally you
need fill CONFIG_TAGOIO_HTTP_WIFI_SSID
with your wifi network SSID and
CONFIG_TAGOIO_HTTP_WIFI_PSK
with the correspondent password at
samples/net/cloud/tagoio_http_post/overlay-wifi.conf file.
west build -b disco_l475_iot1 samples/net/cloud/tagoio_http_post -- -DEXTRA_CONF_FILE=overlay-wifi.conf
west flash
west build -b [sam_v71_xult/samv71q21 | frdm_k64f | nucleo_f767zi] samples/net/cloud/tagoio_http_post -- -DSHIELD=[esp_8266_arduino | inventek_eswifi_arduino_uart] -DEXTRA_CONF_FILE=overlay-wifi.conf
west flash
Visualizing TagoIO dashboard
After you got some logs on console it is time to create a dashboard on the TagoIO to visualize the data.
Go to the TagoIO web console
Create a dashboard as Normal, give it a denomination and move next
Add a line plot graph. You will see your device, temperature variable will be automatically selected for you.
Just Save and enjoy!
![TagoIO web dashboard](../../../../_images/TagoIO-pc.jpeg)
You can experiment the TagoIO mobile application on your cellphone or tablet. Simple go to your app store and search by TagoIO, install, sign in, enjoy!
![TagoIO mobile dashboard](../../../../_images/TagoIO-mobile.jpeg)
More information at TagoIO [1] and TagoIO Documentation [2].