VEAA-X-3 sample

Overview

A sensor sample that demonstrates how to use a VEAA-X-3 device.

Building and Running

This sample sets the valve setpoint then reads the actual pressure. This is done continuously. When the maximum supported pressure is reached the setpoint is reset to the valve’s minimum supported pressure value.

west build -b <board to use> samples/sensor/veaa_x_3
west flash

Sample Output

Testing test_veaa_x_3
Valve range: 1 to 200 kPa
Setpoint:    1 kPa, actual:   1 kPa
Setpoint:    2 kPa, actual:   2 kPa
Setpoint:    3 kPa, actual:   3 kPa
...
Setpoint:  199 kPa, actual: 199 kPa
Setpoint:  200 kPa, actual: 200 kPa
Setpoint:    1 kPa, actual:   1 kPa
<repeats endlessly>