Public APIs for UART drivers. More...

#include <errno.h>
#include <stddef.h>
#include <zephyr/device.h>
#include <zephyr/syscalls/uart.h>

Data Structures
struct	uart_config
	UART controller configuration structure. More...

struct	uart_event_tx
	UART TX event data. More...

struct	uart_event_rx
	UART RX event data. More...

struct	uart_event_rx_buf
	UART RX buffer released event data. More...

struct	uart_event_rx_stop
	UART RX stopped data. More...

struct	uart_event
	Structure containing information about current event. More...

union	uart_event::uart_event_data
	Event data. More...

Typedefs
typedef void(*	uart_irq_callback_user_data_t) (const struct device dev, void user_data)
	Define the application callback function signature for uart_irq_callback_user_data_set() function.

typedef void(*	uart_irq_config_func_t) (const struct device *dev)
	For configuring IRQ on each individual UART device.

typedef void(*	uart_callback_t) (const struct device dev, struct uart_event evt, void *user_data)
	Define the application callback function signature for uart_callback_set() function.

Enumerations
enum	uart_line_ctrl { UART_LINE_CTRL_BAUD_RATE = BIT(0) , UART_LINE_CTRL_RTS = BIT(1) , UART_LINE_CTRL_DTR = BIT(2) , UART_LINE_CTRL_DCD = BIT(3) , UART_LINE_CTRL_DSR = BIT(4) }
	Line control signals. More...

enum	uart_rx_stop_reason { UART_ERROR_OVERRUN = (1 << 0) , UART_ERROR_PARITY = (1 << 1) , UART_ERROR_FRAMING = (1 << 2) , UART_BREAK = (1 << 3) , UART_ERROR_COLLISION = (1 << 4) , UART_ERROR_NOISE = (1 << 5) }
	Reception stop reasons. More...

enum	uart_config_parity { UART_CFG_PARITY_NONE , UART_CFG_PARITY_ODD , UART_CFG_PARITY_EVEN , UART_CFG_PARITY_MARK , UART_CFG_PARITY_SPACE }
	Parity modes. More...

enum	uart_config_stop_bits { UART_CFG_STOP_BITS_0_5 , UART_CFG_STOP_BITS_1 , UART_CFG_STOP_BITS_1_5 , UART_CFG_STOP_BITS_2 }
	Number of stop bits. More...

enum	uart_config_data_bits { UART_CFG_DATA_BITS_5 , UART_CFG_DATA_BITS_6 , UART_CFG_DATA_BITS_7 , UART_CFG_DATA_BITS_8 , UART_CFG_DATA_BITS_9 }
	Number of data bits. More...

enum	uart_config_flow_control { UART_CFG_FLOW_CTRL_NONE , UART_CFG_FLOW_CTRL_RTS_CTS , UART_CFG_FLOW_CTRL_DTR_DSR , UART_CFG_FLOW_CTRL_RS485 }
	Hardware flow control options. More...

enum	uart_event_type { UART_TX_DONE , UART_TX_ABORTED , UART_RX_RDY , UART_RX_BUF_REQUEST , UART_RX_BUF_RELEASED , UART_RX_DISABLED , UART_RX_STOPPED }
	Types of events passed to callback in UART_ASYNC_API. More...

Functions
int	uart_err_check (const struct device *dev)
	Check whether an error was detected.

int	uart_poll_in (const struct device dev, unsigned char p_char)
	Read a character from the device for input.

int	uart_poll_in_u16 (const struct device dev, uint16_t p_u16)
	Read a 16-bit datum from the device for input.

void	uart_poll_out (const struct device *dev, unsigned char out_char)
	Write a character to the device for output.

void	uart_poll_out_u16 (const struct device *dev, uint16_t out_u16)
	Write a 16-bit datum to the device for output.

int	uart_configure (const struct device dev, const struct uart_config cfg)
	Set UART configuration.

int	uart_config_get (const struct device dev, struct uart_config cfg)
	Get UART configuration.

static int	uart_fifo_fill (const struct device dev, const uint8_t tx_data, int size)
	Fill FIFO with data.

static int	uart_fifo_fill_u16 (const struct device dev, const uint16_t tx_data, int size)
	Fill FIFO with wide data.

static int	uart_fifo_read (const struct device dev, uint8_t rx_data, const int size)
	Read data from FIFO.

static int	uart_fifo_read_u16 (const struct device dev, uint16_t rx_data, const int size)
	Read wide data from FIFO.

void	uart_irq_tx_enable (const struct device *dev)
	Enable TX interrupt in IER.

void	uart_irq_tx_disable (const struct device *dev)
	Disable TX interrupt in IER.

static int	uart_irq_tx_ready (const struct device *dev)
	Check if UART TX buffer can accept a new char.

void	uart_irq_rx_enable (const struct device *dev)
	Enable RX interrupt.

void	uart_irq_rx_disable (const struct device *dev)
	Disable RX interrupt.

static int	uart_irq_tx_complete (const struct device *dev)
	Check if UART TX block finished transmission.

static int	uart_irq_rx_ready (const struct device *dev)
	Check if UART RX buffer has a received char.

void	uart_irq_err_enable (const struct device *dev)
	Enable error interrupt.

void	uart_irq_err_disable (const struct device *dev)
	Disable error interrupt.

int	uart_irq_is_pending (const struct device *dev)
	Check if any IRQs is pending.

int	uart_irq_update (const struct device *dev)
	Start processing interrupts in ISR.

static int	uart_irq_callback_user_data_set (const struct device dev, uart_irq_callback_user_data_t cb, void user_data)
	Set the IRQ callback function pointer.

static int	uart_irq_callback_set (const struct device *dev, uart_irq_callback_user_data_t cb)
	Set the IRQ callback function pointer (legacy).

static int	uart_callback_set (const struct device dev, uart_callback_t callback, void user_data)
	Set event handler function.

int	uart_tx (const struct device dev, const uint8_t buf, size_t len, int32_t timeout)
	Send given number of bytes from buffer through UART.

int	uart_tx_u16 (const struct device dev, const uint16_t buf, size_t len, int32_t timeout)
	Send given number of datum from buffer through UART.

int	uart_tx_abort (const struct device *dev)
	Abort current TX transmission.

int	uart_rx_enable (const struct device dev, uint8_t buf, size_t len, int32_t timeout)
	Start receiving data through UART.

int	uart_rx_enable_u16 (const struct device dev, uint16_t buf, size_t len, int32_t timeout)
	Start receiving wide data through UART.

static int	uart_rx_buf_rsp (const struct device dev, uint8_t buf, size_t len)
	Provide receive buffer in response to UART_RX_BUF_REQUEST event.

static int	uart_rx_buf_rsp_u16 (const struct device dev, uint16_t buf, size_t len)
	Provide wide data receive buffer in response to UART_RX_BUF_REQUEST event.

int	uart_rx_disable (const struct device *dev)
	Disable RX.

int	uart_line_ctrl_set (const struct device *dev, uint32_t ctrl, uint32_t val)
	Manipulate line control for UART.

int	uart_line_ctrl_get (const struct device dev, uint32_t ctrl, uint32_t val)
	Retrieve line control for UART.

int	uart_drv_cmd (const struct device *dev, uint32_t cmd, uint32_t p)
	Send extra command to driver.

Detailed Description

Public APIs for UART drivers.

Data Structures

Typedefs

Enumerations

Functions

Detailed Description