Bluetooth Mesh BLOB Transfer Client model API

Data Structures
struct	bt_mesh_blob_target_pull
	Target node's Pull mode (Pull BLOB Transfer Mode) context used while sending chunks to the Target node. More...
struct	bt_mesh_blob_target
	BLOB Transfer Client Target node. More...
struct	bt_mesh_blob_xfer_info
	BLOB transfer information. More...
struct	bt_mesh_blob_cli_inputs
	BLOB Transfer Client transfer inputs. More...
struct	bt_mesh_blob_cli_caps
	Transfer capabilities of a Target node. More...
struct	bt_mesh_blob_cli_cb
	Event handler callbacks for the BLOB Transfer Client model. More...
struct	bt_mesh_blob_cli
	BLOB Transfer Client model instance. More...

Macros
#define	BT_MESH_MODEL_BLOB_CLI(_cli)
	BLOB Transfer Client model Composition Data entry.

Enumerations
enum	bt_mesh_blob_cli_state {   BT_MESH_BLOB_CLI_STATE_NONE , BT_MESH_BLOB_CLI_STATE_CAPS_GET , BT_MESH_BLOB_CLI_STATE_START , BT_MESH_BLOB_CLI_STATE_BLOCK_START ,   BT_MESH_BLOB_CLI_STATE_BLOCK_SEND , BT_MESH_BLOB_CLI_STATE_BLOCK_CHECK , BT_MESH_BLOB_CLI_STATE_XFER_CHECK , BT_MESH_BLOB_CLI_STATE_CANCEL ,   BT_MESH_BLOB_CLI_STATE_SUSPENDED , BT_MESH_BLOB_CLI_STATE_XFER_PROGRESS_GET }
	BLOB Transfer Client state. More...

Functions
int	bt_mesh_blob_cli_caps_get (struct bt_mesh_blob_cli *cli, const struct bt_mesh_blob_cli_inputs *inputs)
	Retrieve transfer capabilities for a list of Target nodes.
int	bt_mesh_blob_cli_send (struct bt_mesh_blob_cli *cli, const struct bt_mesh_blob_cli_inputs *inputs, const struct bt_mesh_blob_xfer *xfer, const struct bt_mesh_blob_io *io)
	Perform a BLOB transfer.
int	bt_mesh_blob_cli_suspend (struct bt_mesh_blob_cli *cli)
	Suspend the active transfer.
int	bt_mesh_blob_cli_resume (struct bt_mesh_blob_cli *cli)
	Resume the suspended transfer.
void	bt_mesh_blob_cli_cancel (struct bt_mesh_blob_cli *cli)
	Cancel an ongoing transfer.
int	bt_mesh_blob_cli_xfer_progress_get (struct bt_mesh_blob_cli *cli, const struct bt_mesh_blob_cli_inputs *inputs)
	Get the progress of BLOB transfer.
uint8_t	bt_mesh_blob_cli_xfer_progress_active_get (struct bt_mesh_blob_cli *cli)
	Get the current progress of the active transfer in percent.
bool	bt_mesh_blob_cli_is_busy (struct bt_mesh_blob_cli *cli)
	Get the current state of the BLOB Transfer Client.

Detailed Description

Macro Definition Documentation

BT_MESH_MODEL_BLOB_CLI

#define BT_MESH_MODEL_BLOB_CLI

(

_cli

)

#include <include/zephyr/bluetooth/mesh/blob_cli.h>

Value:

        BT_MESH_MODEL_CB(BT_MESH_MODEL_ID_BLOB_CLI, _bt_mesh_blob_cli_op,      \
                         NULL, _cli, &_bt_mesh_blob_cli_cb)

BLOB Transfer Client model Composition Data entry.

Parameters

_cli	Pointer to a Bluetooth Mesh BLOB Transfer Client model API instance.

Enumeration Type Documentation

bt_mesh_blob_cli_state

enum bt_mesh_blob_cli_state

#include <include/zephyr/bluetooth/mesh/blob_cli.h>

BLOB Transfer Client state.

Enumerator
BT_MESH_BLOB_CLI_STATE_NONE	No transfer is active.
BT_MESH_BLOB_CLI_STATE_CAPS_GET	Retrieving transfer capabilities.
BT_MESH_BLOB_CLI_STATE_START	Sending transfer start.
BT_MESH_BLOB_CLI_STATE_BLOCK_START	Sending block start.
BT_MESH_BLOB_CLI_STATE_BLOCK_SEND	Sending block chunks.
BT_MESH_BLOB_CLI_STATE_BLOCK_CHECK	Checking block status.
BT_MESH_BLOB_CLI_STATE_XFER_CHECK	Checking transfer status.
BT_MESH_BLOB_CLI_STATE_CANCEL	Cancelling transfer.
BT_MESH_BLOB_CLI_STATE_SUSPENDED	Transfer is suspended.
BT_MESH_BLOB_CLI_STATE_XFER_PROGRESS_GET	Checking transfer progress.

Function Documentation

bt_mesh_blob_cli_cancel()

void bt_mesh_blob_cli_cancel

(

struct bt_mesh_blob_cli *

cli

)

#include <include/zephyr/bluetooth/mesh/blob_cli.h>

Cancel an ongoing transfer.

Parameters

cli	BLOB Transfer Client instance.

bt_mesh_blob_cli_caps_get()

int bt_mesh_blob_cli_caps_get	(	struct bt_mesh_blob_cli *	cli,
		const struct bt_mesh_blob_cli_inputs *	inputs
	)

#include <include/zephyr/bluetooth/mesh/blob_cli.h>

Retrieve transfer capabilities for a list of Target nodes.

Queries the availability and capabilities of all Target nodes, producing a cumulative set of transfer capabilities for the Target nodes, and returning it through the bt_mesh_blob_cli_cb::caps callback.

Retrieving the capabilities may take several seconds, depending on the number of Target nodes and mesh network performance. The end of the procedure is indicated through the bt_mesh_blob_cli_cb::caps callback.

This procedure is not required, but strongly recommended as a preparation for a transfer to maximize performance and the chances of success.

Parameters

cli	BLOB Transfer Client instance.
inputs	Statically allocated BLOB Transfer Client transfer inputs.

Returns

0 on success, or (negative) error code otherwise.

bt_mesh_blob_cli_is_busy()

bool bt_mesh_blob_cli_is_busy

(

struct bt_mesh_blob_cli *

cli

)

#include <include/zephyr/bluetooth/mesh/blob_cli.h>

Get the current state of the BLOB Transfer Client.

Parameters

cli	BLOB Transfer Client instance.

Returns

true if the BLOB Transfer Client is currently participating in a transfer or retrieving the capabilities and false otherwise.

bt_mesh_blob_cli_resume()

int bt_mesh_blob_cli_resume

(

struct bt_mesh_blob_cli *

cli

)

#include <include/zephyr/bluetooth/mesh/blob_cli.h>

Resume the suspended transfer.

Parameters

cli	BLOB Transfer Client instance.

Returns

0 on success, or (negative) error code otherwise.

bt_mesh_blob_cli_send()

int bt_mesh_blob_cli_send	(	struct bt_mesh_blob_cli *	cli,
		const struct bt_mesh_blob_cli_inputs *	inputs,
		const struct bt_mesh_blob_xfer *	xfer,
		const struct bt_mesh_blob_io *	io
	)

#include <include/zephyr/bluetooth/mesh/blob_cli.h>

Perform a BLOB transfer.

Starts sending the transfer to the Target nodes. Only Target nodes with a status of BT_MESH_BLOB_SUCCESS will be considered.

The transfer will keep going either until all Target nodes have been dropped, or the full BLOB has been sent.

The BLOB transfer may take several minutes, depending on the number of Target nodes, size of the BLOB and mesh network performance. The end of the transfer is indicated through the bt_mesh_blob_cli_cb::end callback.

A Client only supports one transfer at the time.

Parameters

cli	BLOB Transfer Client instance.
inputs	Statically allocated BLOB Transfer Client transfer inputs.
xfer	Statically allocated transfer parameters.
io	BLOB stream to read the transfer from.

Returns

0 on success, or (negative) error code otherwise.

bt_mesh_blob_cli_suspend()

int bt_mesh_blob_cli_suspend

(

struct bt_mesh_blob_cli *

cli

)

#include <include/zephyr/bluetooth/mesh/blob_cli.h>

Suspend the active transfer.

Parameters

cli	BLOB Transfer Client instance.

Returns

0 on success, or (negative) error code otherwise.

bt_mesh_blob_cli_xfer_progress_active_get()

uint8_t bt_mesh_blob_cli_xfer_progress_active_get

(

struct bt_mesh_blob_cli *

cli

)

#include <include/zephyr/bluetooth/mesh/blob_cli.h>

Get the current progress of the active transfer in percent.

Parameters

cli	BLOB Transfer Client instance.

Returns

The current transfer progress, or 0 if no transfer is active.

bt_mesh_blob_cli_xfer_progress_get()

int bt_mesh_blob_cli_xfer_progress_get	(	struct bt_mesh_blob_cli *	cli,
		const struct bt_mesh_blob_cli_inputs *	inputs
	)

#include <include/zephyr/bluetooth/mesh/blob_cli.h>

Get the progress of BLOB transfer.

This function can only be used if the BLOB Transfer Client is currently not performing a BLOB transfer. To get progress of the active BLOB transfer, use the bt_mesh_blob_cli_xfer_progress_active_get function.

Parameters

cli	BLOB Transfer Client instance.
inputs	Statically allocated BLOB Transfer Client transfer inputs.

Returns

0 on success, or (negative) error code otherwise.