timing.h File Reference

#include <zephyr/arch/arch_interface.h>
#include <zephyr/timing/types.h>

Go to the source code of this file.

Functions
void	soc_timing_init (void)
	Initialize the timing subsystem on SoC.
void	soc_timing_start (void)
	Signal the start of the timing information gathering.
void	soc_timing_stop (void)
	Signal the end of the timing information gathering.
timing_t	soc_timing_counter_get (void)
	Return timing counter.
uint64_t	soc_timing_cycles_get (volatile timing_t *const start, volatile timing_t *const end)
	Get number of cycles between start and end.
uint64_t	soc_timing_freq_get (void)
	Get frequency of counter used (in Hz).
uint64_t	soc_timing_cycles_to_ns (uint64_t cycles)
	Convert number of cycles into nanoseconds.
uint64_t	soc_timing_cycles_to_ns_avg (uint64_t cycles, uint32_t count)
	Convert number of cycles into nanoseconds with averaging.
uint32_t	soc_timing_freq_get_mhz (void)
	Get frequency of counter used (in MHz).
void	board_timing_init (void)
	Initialize the timing subsystem.
void	board_timing_start (void)
	Signal the start of the timing information gathering.
void	board_timing_stop (void)
	Signal the end of the timing information gathering.
timing_t	board_timing_counter_get (void)
	Return timing counter.
uint64_t	board_timing_cycles_get (volatile timing_t *const start, volatile timing_t *const end)
	Get number of cycles between start and end.
uint64_t	board_timing_freq_get (void)
	Get frequency of counter used (in Hz).
uint64_t	board_timing_cycles_to_ns (uint64_t cycles)
	Convert number of cycles into nanoseconds.
uint64_t	board_timing_cycles_to_ns_avg (uint64_t cycles, uint32_t count)
	Convert number of cycles into nanoseconds with averaging.
uint32_t	board_timing_freq_get_mhz (void)
	Get frequency of counter used (in MHz).
void	timing_init (void)
	Initialize the timing subsystem.
void	timing_start (void)
	Signal the start of the timing information gathering.
void	timing_stop (void)
	Signal the end of the timing information gathering.
static timing_t	timing_counter_get (void)
	Return timing counter.
static uint64_t	timing_cycles_get (volatile timing_t *const start, volatile timing_t *const end)
	Get number of cycles between start and end.
static uint64_t	timing_freq_get (void)
	Get frequency of counter used (in Hz).
static uint64_t	timing_cycles_to_ns (uint64_t cycles)
	Convert number of cycles into nanoseconds.
static uint64_t	timing_cycles_to_ns_avg (uint64_t cycles, uint32_t count)
	Convert number of cycles into nanoseconds with averaging.
static uint32_t	timing_freq_get_mhz (void)
	Get frequency of counter used (in MHz).