Grove Shield for Pi Pico V1
Overview
Model: 103100142
The Grove Shield for Pi Pico V1 [11] board provides a simple way to connect with Raspberry Pi Pico boards. This version 1 is the first member in the Grove System to support low-cost, high-performance microcontroller RP2040 on the Raspberry Pi Pico boards, either with or without W option.
Power Compatible
Every Grove connector has four wires, one of which is the VCC. However, not every controller main board needs a supply voltage of 5V, some boards only need 3.3V. That’s why now a power toggle switch was add to this version so that one can select the suitable voltage of the controller main board using via this switch.
Pinout Diagram
The pinout of Shield for Pi Pico V1 is the same as Raspberry Pi Pico R3 [9] or Raspberry Pi Pico R3 W [10]. The shield usually has the same pin position as the Raspberry Pi Pico development board and will be used as an carrier board.
Hardware
Name |
Function to Grove port-pin –> |
UART0 |
UART1 |
I2C0 |
I2C1 |
D16 |
D18 |
D20 |
A0 |
A1 |
A2 |
|---|---|---|---|---|---|---|---|---|---|---|---|
GP0 |
Digital 0 |
2 |
|||||||||
GP1 |
Digital 1 |
1 |
|||||||||
GP2 |
Digital 2 |
||||||||||
GP3 |
Digital 3 |
||||||||||
GP4 |
Digital 4 |
2 |
|||||||||
GP5 |
Digital 5 |
1 |
|||||||||
GP6 |
Digital 6 |
2 |
|||||||||
GP7 |
Digital 7 |
1 |
|||||||||
GP8 |
Digital 8 |
2 |
|||||||||
GP9 |
Digital 9 |
1 |
|||||||||
GP10 |
Digital 10 |
||||||||||
GP11 |
Digital 11 |
||||||||||
GP12 |
Digital 12 |
||||||||||
GP13 |
Digital 13 |
||||||||||
GP14 |
Digital 14 |
||||||||||
GP15 |
Digital 15 |
||||||||||
GP16 |
Digital 16 |
1 |
|||||||||
GP17 |
Digital 17 |
2 |
|||||||||
GP18 |
Digital 18 |
1 |
|||||||||
GP19 |
Digital 19 |
2 |
|||||||||
GP20 |
Digital 20 |
1 |
|||||||||
GP21 |
Digital 21 |
2 |
|||||||||
GP22 |
Digital 22 |
||||||||||
GP23 |
(Digital 23) not on header |
||||||||||
GP24 |
(Digital 24) not on header |
||||||||||
GP25 |
(Digital 25) not on header |
||||||||||
ADC0 |
Analog 0 / Digital 26 |
1 |
2 |
||||||||
ADC1 |
Analog 1 / Digital 27 |
1 |
2 |
||||||||
ADC2 |
Analog 2 / Digital 28 |
1 |