Health Client Model

Health Client Model. More...

Data Structures
struct	bt_mesh_health_cli
	Health Client Model Context. More...

Macros
#define	BT_MESH_MODEL_HEALTH_CLI(cli_data)
	Generic Health Client model composition data entry.

Functions
int	bt_mesh_health_cli_fault_get (struct bt_mesh_health_cli *cli, struct bt_mesh_msg_ctx *ctx, uint16_t cid, uint8_t *test_id, uint8_t *faults, size_t *fault_count)
	Get the registered fault state for the given Company ID.
int	bt_mesh_health_cli_fault_clear (struct bt_mesh_health_cli *cli, struct bt_mesh_msg_ctx *ctx, uint16_t cid, uint8_t *test_id, uint8_t *faults, size_t *fault_count)
	Clear the registered faults for the given Company ID.
int	bt_mesh_health_cli_fault_clear_unack (struct bt_mesh_health_cli *cli, struct bt_mesh_msg_ctx *ctx, uint16_t cid)
	Clear the registered faults for the given Company ID (unacked).
int	bt_mesh_health_cli_fault_test (struct bt_mesh_health_cli *cli, struct bt_mesh_msg_ctx *ctx, uint16_t cid, uint8_t test_id, uint8_t *faults, size_t *fault_count)
	Invoke a self-test procedure for the given Company ID.
int	bt_mesh_health_cli_fault_test_unack (struct bt_mesh_health_cli *cli, struct bt_mesh_msg_ctx *ctx, uint16_t cid, uint8_t test_id)
	Invoke a self-test procedure for the given Company ID (unacked).
int	bt_mesh_health_cli_period_get (struct bt_mesh_health_cli *cli, struct bt_mesh_msg_ctx *ctx, uint8_t *divisor)
	Get the target node's Health fast period divisor.
int	bt_mesh_health_cli_period_set (struct bt_mesh_health_cli *cli, struct bt_mesh_msg_ctx *ctx, uint8_t divisor, uint8_t *updated_divisor)
	Set the target node's Health fast period divisor.
int	bt_mesh_health_cli_period_set_unack (struct bt_mesh_health_cli *cli, struct bt_mesh_msg_ctx *ctx, uint8_t divisor)
	Set the target node's Health fast period divisor (unacknowledged).
int	bt_mesh_health_cli_attention_get (struct bt_mesh_health_cli *cli, struct bt_mesh_msg_ctx *ctx, uint8_t *attention)
	Get the current attention timer value.
int	bt_mesh_health_cli_attention_set (struct bt_mesh_health_cli *cli, struct bt_mesh_msg_ctx *ctx, uint8_t attention, uint8_t *updated_attention)
	Set the attention timer.
int	bt_mesh_health_cli_attention_set_unack (struct bt_mesh_health_cli *cli, struct bt_mesh_msg_ctx *ctx, uint8_t attention)
	Set the attention timer (unacknowledged).
int32_t	bt_mesh_health_cli_timeout_get (void)
	Get the current transmission timeout value.
void	bt_mesh_health_cli_timeout_set (int32_t timeout)
	Set the transmission timeout value.

Detailed Description

Health Client Model.

Macro Definition Documentation

BT_MESH_MODEL_HEALTH_CLI

#define BT_MESH_MODEL_HEALTH_CLI

(

cli_data

)

#include <include/zephyr/bluetooth/mesh/health_cli.h>

Value:

        BT_MESH_MODEL_CB(BT_MESH_MODEL_ID_HEALTH_CLI, bt_mesh_health_cli_op,   \
                         &(cli_data)->pub, cli_data, &bt_mesh_health_cli_cb)

Generic Health Client model composition data entry.

Parameters

cli_data

Pointer to a Health Client Model instance.

Function Documentation

bt_mesh_health_cli_attention_get()

int bt_mesh_health_cli_attention_get	(	struct bt_mesh_health_cli *	cli,
		struct bt_mesh_msg_ctx *	ctx,
		uint8_t *	attention
	)

#include <include/zephyr/bluetooth/mesh/health_cli.h>

Get the current attention timer value.

This method can be used asynchronously by setting attention as NULL. This way the method will not wait for response and will return immediately after sending the command.

To process the response arguments of an async method, register the attention_status callback in bt_mesh_health_cli struct.

Parameters

cli	Client model to send on.
ctx	Message context, or NULL to use the configured publish parameters.
attention	Attention timer response buffer, measured in seconds.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_health_cli_attention_set()

int bt_mesh_health_cli_attention_set	(	struct bt_mesh_health_cli *	cli,
		struct bt_mesh_msg_ctx *	ctx,
		uint8_t	attention,
		uint8_t *	updated_attention
	)

#include <include/zephyr/bluetooth/mesh/health_cli.h>

Set the attention timer.

This method can be used asynchronously by setting updated_attention as NULL. This way the method will not wait for response and will return immediately after sending the command.

To process the response arguments of an async method, register the attention_status callback in bt_mesh_health_cli struct.

Parameters

cli	Client model to send on.
ctx	Message context, or NULL to use the configured publish parameters.
attention	New attention timer time, in seconds.
updated_attention	Attention timer response buffer, measured in seconds.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_health_cli_attention_set_unack()

int bt_mesh_health_cli_attention_set_unack	(	struct bt_mesh_health_cli *	cli,
		struct bt_mesh_msg_ctx *	ctx,
		uint8_t	attention
	)

#include <include/zephyr/bluetooth/mesh/health_cli.h>

Set the attention timer (unacknowledged).

Parameters

cli	Client model to send on.
ctx	Message context, or NULL to use the configured publish parameters.
attention	New attention timer time, in seconds.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_health_cli_fault_clear()

int bt_mesh_health_cli_fault_clear	(	struct bt_mesh_health_cli *	cli,
		struct bt_mesh_msg_ctx *	ctx,
		uint16_t	cid,
		uint8_t *	test_id,
		uint8_t *	faults,
		size_t *	fault_count
	)

#include <include/zephyr/bluetooth/mesh/health_cli.h>

Clear the registered faults for the given Company ID.

This method can be used asynchronously by setting test_id and ( faults or fault_count ) as NULL This way the method will not wait for response and will return immediately after sending the command.

To process the response arguments of an async method, register the fault_status callback in bt_mesh_health_cli struct.

See also

Health faults

Parameters

cli	Client model to send on.
ctx	Message context, or NULL to use the configured publish parameters.
cid	Company ID to clear the registered faults for.
test_id	Test ID response buffer.
faults	Fault array response buffer.
fault_count	Fault count response buffer.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_health_cli_fault_clear_unack()

int bt_mesh_health_cli_fault_clear_unack	(	struct bt_mesh_health_cli *	cli,
		struct bt_mesh_msg_ctx *	ctx,
		uint16_t	cid
	)

#include <include/zephyr/bluetooth/mesh/health_cli.h>

Clear the registered faults for the given Company ID (unacked).

See also

Health faults

Parameters

cli	Client model to send on.
ctx	Message context, or NULL to use the configured publish parameters.
cid	Company ID to clear the registered faults for.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_health_cli_fault_get()

int bt_mesh_health_cli_fault_get	(	struct bt_mesh_health_cli *	cli,
		struct bt_mesh_msg_ctx *	ctx,
		uint16_t	cid,
		uint8_t *	test_id,
		uint8_t *	faults,
		size_t *	fault_count
	)

#include <include/zephyr/bluetooth/mesh/health_cli.h>

Get the registered fault state for the given Company ID.

This method can be used asynchronously by setting test_id and ( faults or fault_count ) as NULL This way the method will not wait for response and will return immediately after sending the command.

To process the response arguments of an async method, register the fault_status callback in bt_mesh_health_cli struct.

See also

Health faults

Parameters

cli	Client model to send on.
ctx	Message context, or NULL to use the configured publish parameters.
cid	Company ID to get the registered faults of.
test_id	Test ID response buffer.
faults	Fault array response buffer.
fault_count	Fault count response buffer.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_health_cli_fault_test()

int bt_mesh_health_cli_fault_test	(	struct bt_mesh_health_cli *	cli,
		struct bt_mesh_msg_ctx *	ctx,
		uint16_t	cid,
		uint8_t	test_id,
		uint8_t *	faults,
		size_t *	fault_count
	)

#include <include/zephyr/bluetooth/mesh/health_cli.h>

Invoke a self-test procedure for the given Company ID.

This method can be used asynchronously by setting faults or fault_count as NULL This way the method will not wait for response and will return immediately after sending the command.

To process the response arguments of an async method, register the fault_status callback in bt_mesh_health_cli struct.

Parameters

cli	Client model to send on.
ctx	Message context, or NULL to use the configured publish parameters.
cid	Company ID to invoke the test for.
test_id	Test ID response buffer.
faults	Fault array response buffer.
fault_count	Fault count response buffer.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_health_cli_fault_test_unack()

int bt_mesh_health_cli_fault_test_unack	(	struct bt_mesh_health_cli *	cli,
		struct bt_mesh_msg_ctx *	ctx,
		uint16_t	cid,
		uint8_t	test_id
	)

#include <include/zephyr/bluetooth/mesh/health_cli.h>

Invoke a self-test procedure for the given Company ID (unacked).

Parameters

cli	Client model to send on.
ctx	Message context, or NULL to use the configured publish parameters.
cid	Company ID to invoke the test for.
test_id	Test ID response buffer.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_health_cli_period_get()

int bt_mesh_health_cli_period_get	(	struct bt_mesh_health_cli *	cli,
		struct bt_mesh_msg_ctx *	ctx,
		uint8_t *	divisor
	)

#include <include/zephyr/bluetooth/mesh/health_cli.h>

Get the target node's Health fast period divisor.

The health period divisor is used to increase the publish rate when a fault is registered. Normally, the Health server will publish with the period in the configured publish parameters. When a fault is registered, the publish period is divided by (1 << divisor). For example, if the target node's Health server is configured to publish with a period of 16 seconds, and the Health fast period divisor is 5, the Health server will publish with an interval of 500 ms when a fault is registered.

This method can be used asynchronously by setting divisor as NULL. This way the method will not wait for response and will return immediately after sending the command.

To process the response arguments of an async method, register the period_status callback in bt_mesh_health_cli struct.

Parameters

cli	Client model to send on.
ctx	Message context, or NULL to use the configured publish parameters.
divisor	Health period divisor response buffer.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_health_cli_period_set()

int bt_mesh_health_cli_period_set	(	struct bt_mesh_health_cli *	cli,
		struct bt_mesh_msg_ctx *	ctx,
		uint8_t	divisor,
		uint8_t *	updated_divisor
	)

#include <include/zephyr/bluetooth/mesh/health_cli.h>

Set the target node's Health fast period divisor.

The health period divisor is used to increase the publish rate when a fault is registered. Normally, the Health server will publish with the period in the configured publish parameters. When a fault is registered, the publish period is divided by (1 << divisor). For example, if the target node's Health server is configured to publish with a period of 16 seconds, and the Health fast period divisor is 5, the Health server will publish with an interval of 500 ms when a fault is registered.

This method can be used asynchronously by setting updated_divisor as NULL. This way the method will not wait for response and will return immediately after sending the command.

To process the response arguments of an async method, register the period_status callback in bt_mesh_health_cli struct.

Parameters

cli	Client model to send on.
ctx	Message context, or NULL to use the configured publish parameters.
divisor	New Health period divisor.
updated_divisor	Health period divisor response buffer.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_health_cli_period_set_unack()

int bt_mesh_health_cli_period_set_unack	(	struct bt_mesh_health_cli *	cli,
		struct bt_mesh_msg_ctx *	ctx,
		uint8_t	divisor
	)

#include <include/zephyr/bluetooth/mesh/health_cli.h>

Set the target node's Health fast period divisor (unacknowledged).

This is an unacknowledged version of this API.

Parameters

cli	Client model to send on.
ctx	Message context, or NULL to use the configured publish parameters.
divisor	New Health period divisor.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_health_cli_timeout_get()

int32_t bt_mesh_health_cli_timeout_get

(

void

)

#include <include/zephyr/bluetooth/mesh/health_cli.h>

Get the current transmission timeout value.

Returns

The configured transmission timeout in milliseconds.

bt_mesh_health_cli_timeout_set()

void bt_mesh_health_cli_timeout_set

(

int32_t

timeout

)

#include <include/zephyr/bluetooth/mesh/health_cli.h>

Set the transmission timeout value.

Parameters

timeout

The new transmission timeout.